On Sun, Feb 08, 2004 at 06:40:26AM -0500, Paul Morgan wrote: > On Sun, 08 Feb 2004 01:08:40 -0800, Nano Nano wrote: > > > I have an ASUS P4C800. I have 2.6.2 kernel. I wish to see my CPU and > > Mobo temps (and ideally fan speeds) like Asus PC Probe shows in Windows. [snip] > The first thing you should do is run sensors-detect to determine which > modules you'll need. > > You'll have to install lm-sensors-source and compile the modules for your > kernel.
I think I'm having problems because I'm having problems with modules in general in kernel 2.6 series. Almost everything I used to use with hotplug has to be compiled in, which hotplug now warns about. I tried just enabling everything i2c-related in the kernel as a built-in, but the kernel then hanged on startup. I have module-init-tools installed. What's wrong with me and modules in 2.6? # make-kpkg --added-modules=i2c modules-image [snip] make[3]: *** No rule to make target `/usr/src/linux-2.6.2/include/linux/modversions.h', needed by `kernel/i2c-pport.d'. Stop. # make-kpkg --added-modules=i2c modules-image [fails with same error] # egrep -i "module|versi" .config # Loadable module support CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # sensors-detect [snip] BIOS vendor (ACPI): ACPIAM System vendor (DMI): To Be Filled By O.E.M. BIOS version (DMI): 080009 [snip] Probing for PCI bus adapters... Use driver `i2c-i801' for device 00:1f.3: Intel 82801EB ICH5 [snip] Load `i2c-i801' (say NO if built into your kernel)? (YES/no): FATAL: Module i2c_i801 not found. [snip] i2c-dev is not loaded. Do you want to load it now? (YES/no): FATAL: Module i2c_dev not found. [snip] Couldn't open /proc/bus/i2c?!? at /usr/sbin/sensors-detect line 3970, <STDIN> line 4. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]