On Sunday, February 22, 2004, at 08:25 AM, Mark Gillingham wrote:
On Saturday, February 21, 2004, at 05:30 PM, Bill Marcum wrote:
The BIOS settings for the serial ports should be clearly labeled. Maybe your internal ports are disabled; try "dmesg | grep tty"
The result of dmesg | grep tty is:
ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A
These results check with the BIOS.
My ttyS* devices are:
ls /dev/ttyS* /dev/ttyS0 /dev/ttyS1 /dev/ttyS2 /dev/ttyS3
Why does dmesg report an extra zero in the ttyS* above (i.e., 00 and 01)? Is that my problem? Am I anticipating ttyS0 and ttyS1 and getting in actuality ttyS00 and ttyS01? If so do I create /dev/ttyS00 and /dev/ttyS01 and then use setserial to establish communication?
Mark
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
