I have a board with VIA KT600 chipset and ATI Radeon 9200 64MB, I compiled the agpgart into the kernel, and generated my XF86Config-4 with the fglrxconfig tool.
However the X won't start, the screen doesn't even seem to try to switch to another mode..there are NO (EE) lines in the XFree86.log but the last few lines are: (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.2 (II) fglrx(0): Build-Kernel MODVERSIONS: no (II) fglrx(0): Build-Kernel __SMP__: no (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [drm] register handle = 0xdfef0000 (II) fglrx(0): [agp] Mode=0x1f000a1b bridge: 0x1106/0x3189 (II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000 (II) fglrx(0): [agp] AGP v3 disable mask 0x00000000 (II) fglrx(0): [agp] enabling AGP with mode=0x1f000b1a (I only see this in the log, the screen turns black (still in text mode) and stays that way until I change to another virtual console. When I switch back, I only see the connection reset by peer message. any help ? the dmesg seems to be ok -> -------------------------------------------------------------------------- Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA KT400/KT400A/KT600 chipset agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 128M @ 0xe0000000 -------------------------------------------------------------------------- the fglrx module seems to load without problems too (modprobe fglrx -> -------------------------------------------------------------------------- fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [fglrx] Maximum main memory to use for locked dma buffers: 429 MBytes. [fglrx] module loaded - fglrx 3.7.0 [Dec 18 2003] on minor 0 -------------------------------------------------------------------------- Jakub 'yak' Ondrusek -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
