Jonathan Melhuish wrote:
> Wa-hey! Looks like I got it working! :-) > > May 10 22:36:55 laptop kernel: hub.c: new USB device 00:07.2-1, assigned > address 23 > May 10 22:36:55 laptop kernel: at76c503.c: $Id: at76c503.c,v 1.35 > 2003/07/30 06:31:51 jal2 Exp $ compiled May 9 2004 16:15:33 > May 10 22:36:55 laptop kernel: at76c503.c: firmware version 0.90.0 #44 > (fcs_len 4) > May 10 22:36:55 laptop kernel: at76c503.c: device's MAC > 00:90:99:45:19:51, regulatory domain MKK1 (Japan) (id 65) > May 10 22:36:55 laptop kernel: at76c503.c: registered wlan0 > > It was actually the at76c503-i3861 driver that it uses. It seems to > vary; both of them seem to be listed for Linksys WUSB11! There's a big > table of Amtel devices here: http://at76c503a.berlios.de/devices.html > > Anyway, once I found that out, it was just a matter of adding the > appropriate USB vendor/product ID to the driver. Here's the diff: > > --- at76c503-i3861.c~ 2003-11-30 01:05:35.000000000 +0000 > +++ at76c503-i3861.c 2004-05-10 22:31:20.000000000 +0100 > @@ -72,6 +72,9 @@ > #define VENDOR_ID_DYNALINK 0x069a > #define PRODUCT_ID_DYNALINK_WLL013_I 0x0320 /* Dynalink/Askey WLL013 > (intersil) */ > > +#define VENDOR_ID_BT 0x069a > +#define PRODUCT_ID_BT_VOYAGER_1010 0x0821 /* BT Voyager 1010 */ > + > #define VENDOR_ID_SMC 0x0d5c > #define PRODUCT_ID_SMC2662W_V1 0xa001 /* EZ connect 11Mpbs > Wireless USB Adapter SMC2662W (v1) */ > @@ -101,6 +104,7 @@ > { USB_DEVICE(VENDOR_ID_HP, PRODUCT_ID_HP_HN210W ) }, > { USB_DEVICE(VENDOR_ID_M4Y750, PRODUCT_ID_M4Y750 ) }, > { USB_DEVICE(VENDOR_ID_DYNALINK, PRODUCT_ID_DYNALINK_WLL013_I ) }, > + { USB_DEVICE(VENDOR_ID_BT, PRODUCT_ID_BT_VOYAGER_1010 ) }, > { USB_DEVICE(VENDOR_ID_SMC, PRODUCT_ID_SMC2662W_V1 ) }, > { USB_DEVICE(VENDOR_ID_BENQ, PRODUCT_ID_BENQ_AWL_300 ) }, > { USB_DEVICE(VENDOR_ID_ADDTRON, PRODUCT_ID_ADDTRON_AWU120 ) }, > > I'll send it to the Amtel driver guys, so that hopefully it'll be "plug > and play" in future. > > Wow, my first real contribution to the open source community! 8-) > Good Show! Ron -- bumper sticker -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]