Le Wed, 31 May 2000, vous avez �crit :
> voila j'ai deja pose ce pb, on m'a deja repondu, mais ca ne donne rien
> j'ai refait une image etc... etc...
> je reexplique dont
> controleur Tekram DC395U mdk7 Linux version 2.2.14-15mdk
> mon probleme
> carte scsi bien d�t�ct�e le jour de l'installation
> apres reboot NADA, pas de scsi host detecte
> lancement possible a la main par modprobe
> voila le resulta d'un Dmesg apres lancement a la main
>
> d'abord less question
>
>
> Linux version 2.2.14-15mdk ([EMAIL PROTECTED]) (gcc version
> 2.95.2 19991024 (release)) #1 Tue Jan 4 22:24:20 CET 2000
> Detected 200456937 Hz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 398.95 BogoMIPS
> Memory: 127908k/131072k available (1092k kernel code, 416k reserved,
> 1592k data, 64k init, 0k bigmem)
> Dentry hash table entries: 262144 (order 9, 2048k)
> Buffer cache hash table entries: 131072 (order 7, 512k)
> Page cache hash table entries: 32768 (order 5, 128k)
> VFS: Diskquotas version dquot_6.4.0 initialized
> CPU: Intel Pentium MMX stepping 03
> Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
>
> Checking 'hlt' instruction... OK.
> Intel Pentium with F0 0F bug - workaround enabled.
> POSIX conformance testing by UNIFIX
> PCI: PCI BIOS revision 2.10 entry at 0xfdba1
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> Linux NET4.0 for Linux 2.2
> Based upon Swansea University Computer Society NET3.039
> NET4: Unix domain sockets 1.0 for Linux NET4.0.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> TCP: Hash tables configured (ehash 131072 bhash 65536)
> Initializing RT netlink socket
> Starting kswapd v 1.5
> Detected PS/2 Mouse Port.
> Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> pty: 256 Unix98 ptys configured
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9)
> Real Time Clock Driver v1.09
> RAM disk driver initialized: 16 RAM disks of 4096K size
> PIIX4: IDE controller on PCI bus 00 dev 39
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
> hda: FUJITSU MPC3084AT, ATA DISK drive
> hdb: BCD-48SB CD-ROM, ATAPI CDROM drive
> hdc: IBM-DJNA-371350, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: FUJITSU MPC3084AT, 8063MB w/0kB Cache, CHS=1027/255/63
> hdc: IBM-DJNA-371350, 12949MB w/1966kB Cache, CHS=26310/16/63
> hdb: ATAPI 44X CD-ROM drive, 128kB Cache
> Uniform CDROM driver Revision: 2.56
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
> raid5: measuring checksumming speed
> raid5: MMX detected, trying high-speed MMX checksum routines
> pII_mmx : 294.513 MB/sec
> p5_mmx : 349.377 MB/sec
> 8regs : 213.360 MB/sec
> 32regs : 168.021 MB/sec
> using fastest function: p5_mmx (349.377 MB/sec)
> scsi : 0 hosts.<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< ca comment je
> le change et ou ?????
> scsi : detected total.
> md.c: sizeof(mdp_super_t) = 4096
> Partition check:
> hda: hda1 hda2 < hda5 hda6 > hda3
> hdc: [PTBL] [1650/255/63] hdc1
> autodetecting RAID arrays
> autorun ...
> .. autorun DONE.
> VVFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 64k freed
> Adding Swap: 216836k swap-space (priority -1)
> via-rhine.c:v1.01 2/27/99 Written by Donald Becker
> http://cesdis.gsfc.nasa.gov/linux/drivers/via-rhine.html
> eth0: VIA VT3043 Rhine at 0xdc00, 00:80:c8:eb:bf:94, IRQ 11.
> eth0: MII PHY found at address 8, status 0x782d advertising 05e1 Link
> 40a1.
> DC395x (TRM-S1040) SCSI driver 1.10,
> 1999/07/19<<<<<<<<<<<<<<<<<<<<<<<<<<<< ca c apr�s le lancement a la main
>
> DC395x: Used settings: AdaptID=7
> DC395x (TRM-S1040): 1 adapters found
> scsi0 : Tekram DC395U/UW/F DC315/U V1.10, 1999/07/19
> scsi : 1 host.
> DC395x: Sel Timeout IRQ
> DC395x: Target 01: Sync transfer 100 ns, Offset 15
> Vendor: SEAGATE Model: ST11200N Rev: 9300
> Type: Direct-Access ANSI SCSI revision: 02
> Detected scsi disk sda at scsi0, channel 0, id 1, lun 0
> DC395x: Sel Timeout IRQ
> DC395x: Sel Timeout IRQ
> DC395x: Sel Timeout IRQ
> DC395x: Target 05: Sync transfer 48 ns, Offset 15
> Vendor: YAMAHA Model: CRW8424S Rev: 1.0d
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0
> DC395x: Sel Timeout IRQ
>
> sr0: scsi3-mmc drive: 24x/16x writer cd/rw xa/form2 cdda tray
> SCSI device sda: hdwr sector= 512 bytes. Sectors= 2059140 [1005 MB] [1.0
> GB]
> sda: sda1
>
> Au final comment je lance le module automatiquement, et me dite pas de
> me compiler une image initrd, j'ai deja tester
> Merci de votre comprehension
--
bin SI, c'est par une image initrd, mais il fdaut au pr�lable d�clarer dans le
/etc/conf.modules l'alais de ta carte scsi et faire le mkinitrd APRES.
(alias module : voir sur L�a tout y est expliqu�)
----------------------------
Serge TCHESMELI aKa oLiO
Admin r�seau & syst�me
http://www.lea-linux.org
L�a: Linux �lectronique Aide
----------------------------
Powered by Slakware 7.0
