Le Dimanche 28 Mai 2006 14:14, Nicolas Lécureuil a écrit : > > on dirait qu'il se met pas correctement, > > que donne ls /dev/sd* ?
Oh, attend, attend, il vient de s'y mettre!!!! j'ai relancé dmesg juste après et voici la fin (une fois monté) end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 usb 4-5: USB disconnect, address 3 usb 4-5: new high speed USB device using ehci_hcd and address 4 scsi1 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete usb 4-5: USB disconnect, address 4 usb 4-5: new high speed USB device using ehci_hcd and address 5 scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 usb 4-5: reset high speed USB device using ehci_hcd and address 5 scsi: Device offlined - not ready after error recovery: host 2 channel 0 id 0 lun 0 usb-storage: device scan complete end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 usb 4-5: USB disconnect, address 5 usb 4-5: new high speed USB device using ehci_hcd and address 6 scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 6 usb-storage: waiting for device to settle before scanning end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 Vendor: Maxtor 6 Model: Y120L0 Rev: 0 0 Type: Direct-Access ANSI SCSI revision: 00 usb-storage: device scan complete SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) sda: assuming drive cache: write through SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) sda: assuming drive cache: write through /dev/scsi/host3/bus0/target0/lun0: p1 Attached scsi disk sda at scsi3, channel 0, id 0, lun 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. -- Les Bestioles en WouaB: http://www.bertrand.vuarnesson.com/
========================================= Vous souhaitez acquerir votre Pack ou des Services Mandriva? Rendez-vous sur "http://store.mandriva.com";. Rejoignez le club mandrake : http://www.mandrivaclub.com =========================================
