Thank you for taking the time to report this bug and helping to make
Ubuntu better. We are sorry that we do not always have the capacity to
look at all reported bugs in a timely manner. There have been many
changes in Ubuntu since that time you reported the bug and your problem
may have been fixed with some of the updates. It would help us a lot if
you could test it on a currently supported Ubuntu version. When you test
it and it is still an issue, kindly upload the updated logs by running
apport-collect 391849 and any other logs that are relevant for this
particular issue.
** Changed in: network-manager (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/391849
Title:
helper adds route to my inner gateway too late
Status in “network-manager” package in Ubuntu:
Incomplete
Bug description:
i configure nm-openvpn, that way :
root 16705 2.0 0.2 4760 2664 ? S 02:32 0:00
/usr/sbin/openvpn --remote vpn-unix.yandex.net --nobind --dev tun --proto udp
--port 1194 --cipher AES-128-CBC --tls-auth /home/vany/cert/tls.key --syslog
nm-openvpn --script-security 2 --up
/usr/lib/network-manager-openvpn/nm-openvpn-service-openvpn-helper --up-restart
--persist-key --persist-tun --management 127.0.0.1 1194
--management-query-passwords --route-noexec --client --ca
/home/vany/cert/cachain.pem --cert /home/vany/cert/cert.pem --key
/home/vany/cert/privkey.pem
root 16712 0.0 0.0 1872 532 ? S 02:33 0:00 /bin/sh
/usr/lib/network-manager-openvpn/nm-openvpn-service-openvpn-helper tun0 1500
1557 87.250.229.163 10.0.1.1 init
and when it established connection i has this:
eth1 Link encap:Ethernet HWaddr 00:16:6f:a9:d6:9a
inet addr:192.168.1.77 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::216:6fff:fea9:d69a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:146904 errors:59 dropped:59 overruns:0 frame:0
TX packets:79339 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:226827719 (226.8 MB) TX bytes:13453593 (13.4 MB)
Interrupt:18 Base address:0xc000 Memory:b0102000-b0102fff
tun0 Link encap:UNSPEC HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:87.250.229.163 P-t-P:10.0.1.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Destination Gateway Genmask Flags MSS Window irtt Iface
213.180.194.73 192.168.1.1 255.255.255.255 UGH 0 0 0 eth1
213.180.194.73 192.168.1.1 255.255.255.255 UGH 0 0 0 tun0
>>>>>>> 192.168.1.1 0.0.0.0 255.255.255.255 UH 0 0
0 tun0
91.197.112.7 10.0.1.1 255.255.255.255 UGH 0 0 0 tun0
91.197.114.28 10.0.1.1 255.255.255.255 UGH 0 0 0 tun0
10.0.1.1 0.0.0.0 255.255.255.255 UH 0 0 0 tun0
213.180.194.74 10.0.1.1 255.255.255.254 UG 0 0 0 tun0
213.180.194.76 10.0.1.1 255.255.255.252 UG 0 0 0 tun0
213.180.194.64 10.0.1.1 255.255.255.248 UG 0 0 0 tun0
213.180.194.80 10.0.1.1 255.255.255.240 UG 0 0 0 tun0
213.180.194.96 10.0.1.1 255.255.255.224 UG 0 0 0 tun0
213.180.194.0 10.0.1.1 255.255.255.192 UG 0 0 0 tun0
213.180.194.128 10.0.1.1 255.255.255.128 UG 0 0 0 tun0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
213.180.195.0 10.0.1.1 255.255.255.0 UG 0 0 0 tun0
213.180.192.0 10.0.1.1 255.255.254.0 UG 0 0 0 tun0
213.180.196.0 10.0.1.1 255.255.252.0 UG 0 0 0 tun0
213.180.200.0 10.0.1.1 255.255.248.0 UG 0 0 0 tun0
213.180.208.0 10.0.1.1 255.255.240.0 UG 0 0 0 tun0
87.250.224.0 10.0.1.1 255.255.224.0 UG 0 0 0 tun0
77.88.0.0 10.0.1.1 255.255.192.0 UG 0 0 0 tun0
93.158.128.0 10.0.1.1 255.255.192.0 UG 0 0 0 tun0
95.108.128.0 10.0.1.1 255.255.128.0 UG 0 0 0 tun0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 tun0
0.0.0.0 10.0.1.1 0.0.0.0 UG 0 0 0 tun0
highlighted route is through tun0, but must be throught eth1
when i manually change it to eth1 - all works.
I think - this happens because default route at thius moment is
through tun0, and in route command explicit iface definition is not
present.
I cant understand how this helper and dbus works together and i can't
fix this bug. Please help me.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/391849/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp
