As per the instructions given in the link https://developer.mozilla.org/en-US/Firefox_OS/Developer_phone_guide/ZTE_OPEN#Device_support
I created the system image. *I erased system and userdata.* Later, I flashed system.img. *Flashing was not successful*. writing 'system'... FAILED (status read failed (No such device)) Soon the devices started rebooting. Later the device is stuck at the boot animation. *Holding Vol up + Vol down + power button is not taking me to the fast boot mode*. How do I get back the device with the normal factory image? On Tue, Nov 19, 2013 at 11:10 AM, Manjunatha M <[email protected]> wrote: > No Jason, > > I created a custom build by syncing the B2G code. I built the image for > inara device. > > > On Tue, Nov 19, 2013 at 11:06 AM, Jason Weathersby < > [email protected]> wrote: > >> Manjunatha >> >> Are you using the OPEN_(REGCode)_DEV_FFOS_V1.0.0B02 zip file from ZTE? >> I had to remove the battery and make sure the sd card with the update was >> seated properly. >> >> Jason >> >> ----- Original Message ----- >> From: "Manjunatha M" <[email protected]> >> To: "Daniel Roesler" <[email protected]>, [email protected] >> Cc: [email protected] >> Sent: Monday, November 18, 2013 9:27:39 PM >> Subject: Re: [b2g] ZTE Open device issue. >> >> My device was already fastboot enabled. >> I wanted to flash my custom build. *I erased system and userdata.* Later, >> I >> flashed system.img. *Flashing was not successful*. Soon the devices >> started >> rebooting. Later the device is stuck at the boot animation. >> >> *Holding Vol up + Vol down + power button is not taking me to the fast >> boot >> mode*. >> >> How do I get the factory build flash on my device? Please help >> >> Regards, >> Manjunatha >> >> >> On Tue, Nov 19, 2013 at 3:17 AM, Daniel Roesler <[email protected]> >> wrote: >> >> > I had the same issue, and fixed it by updating to Revision 2 that >> enables >> > fastboot. >> > >> > >> > >> https://developer.mozilla.org/en-US/Firefox_OS/Developer_phone_guide/ZTE_OPEN#Device_revisions >> > >> > >> > On Mon, Nov 18, 2013 at 4:04 AM, Manjunatha M <[email protected]> wrote: >> > >> >> Hi All, >> >> >> >> I flashed my ZTE Open with my custom build FFOS v1.2 >> >> >> >> After the complete build, I executed following commands >> >> >> >> fastboot erase system >> >> fastboot erase userdata >> >> fastboot flash system system.img >> >> >> >> I got the following error while flashing the system image. >> >> >> >> >> >> writing 'system'... >> >> FAILED (status read failed (No such device)) >> >> >> >> >> >> >> >> Now my device is not getting into the fastboot mode. Can someone help >> me >> >> with this? >> >> >> >> -- >> >> Regards, >> >> Manjunatha >> >> _______________________________________________ >> >> dev-b2g mailing list >> >> [email protected] >> >> https://lists.mozilla.org/listinfo/dev-b2g >> >> >> > >> > >> >> >> -- >> Regards, >> Manjunatha >> _______________________________________________ >> dev-b2g mailing list >> [email protected] >> https://lists.mozilla.org/listinfo/dev-b2g >> > > > > -- > Regards, > Manjunatha > -- Regards, Manjunatha _______________________________________________ dev-b2g mailing list [email protected] https://lists.mozilla.org/listinfo/dev-b2g
