Hrm ok. Good sign that we can import numpy. However, it makes no sense that we end up with an import error. Try running the install command again and see what happens. Make sure you don't do it in a new terminal or anything. So do:
which python sudo python setup.py install from the basemap folder and post the output again if you could. -- Joyce On Wed, Jan 14, 2015 at 9:39 AM, nic pederson <nicpeder...@gmail.com> wrote: > pastebin.com/dDB1PVCz > On Jan 14, 2015 9:31 AM, "Michael Joyce" <jo...@apache.org> wrote: > >> No problem. So to elaborate a bit for you. The problem that killed the >> install when you ran it with sudo was >> >> "ImportError: No module named numpy" >> >> So when it tried to run setup.py something somewhere tried to import the >> numpy library. Numpy is one of the OCW dependencies and one of the packages >> installed with Anaconda. So, if it was using the Anaconda Python it seems >> weird that it wouldn't be able to import numpy. This is why I thought it >> wasn't using the Anaconda Python and had you check that. However, `which >> python` seems to indicate that isn't the case. So to confirm that we aren't >> crazy, run these 3 commands: >> >> which python >> python >> import numpy >> >> If that last command fails then it's time for us to be confused =) >> >> Hopefully that helps! >> >> >> -- Joyce >> >> On Wed, Jan 14, 2015 at 9:21 AM, nic pederson <nicpeder...@gmail.com> >> wrote: >> >>> I'm not sure I know what you mean by that. How do I run python and >>> import bumpy? I apologize for my command line naivety. >>> >>> Nic >>> On Jan 14, 2015 9:10 AM, "Michael Joyce" <jo...@apache.org> wrote: >>> >>>> And if you run python and import numpy it does or doesn't fail? If it's >>>> pointing to the Anaconda python when you ran the other command I'm not >>>> really sure why it would fail on a numpy import =/ >>>> >>>> >>>> -- Joyce >>>> >>>> On Wed, Jan 14, 2015 at 8:57 AM, nicpeder...@gmail.com < >>>> nicpeder...@gmail.com> wrote: >>>> >>>>> Output of which python is >>>>> >>>>> /home/nic/climate/anaconda/bin//python >>>>> >>>>> >>>>> Sent from my HTC phone. >>>>> >>>>> ----- Reply message ----- >>>>> From: "Michael Joyce" <jo...@apache.org> >>>>> To: "nic pederson" <nicpeder...@gmail.com> >>>>> Cc: "dev@climate.apache.org" <dev@climate.apache.org>, " >>>>> chris.a.mattm...@nasa.gov" <chris.a.mattm...@nasa.gov> >>>>> Subject: New Student - Caltech-JPL Summer School on Big Data Analytics >>>>> - Need Help Setting up OCW >>>>> Date: Wed, Jan 14, 2015 8:47 AM >>>>> >>>>> Ok the second one leads me to believe that the wrong Python is getting >>>>> used. Can you check that 'python' really is the anaconda python where >>>>> numpy >>>>> would be installed? Namely, what is the output of `which python` and can >>>>> you manually run python and import numpy without an error? >>>>> >>>>> >>>>> -- Joyce >>>>> >>>>> On Wed, Jan 14, 2015 at 8:39 AM, nic pederson <nicpeder...@gmail.com> >>>>> wrote: >>>>> >>>>>> It didn't seem to like it. I also tried with sudo since it gave >>>>>> permission errors. >>>>>> >>>>>> pastebin.com/LDbpgvWu >>>>>> On Jan 14, 2015 8:29 AM, "Michael Joyce" <jo...@apache.org> wrote: >>>>>> >>>>>>> No it shouldn't matter where it's at. Was mostly just guessing where >>>>>>> it might be off the top of my head to be honest =) >>>>>>> >>>>>>> >>>>>>> -- Joyce >>>>>>> >>>>>>> On Wed, Jan 14, 2015 at 8:26 AM, nicpeder...@gmail.com < >>>>>>> nicpeder...@gmail.com> wrote: >>>>>>> >>>>>>>> The basemap folder is in my home directory. Should I move it first? >>>>>>>> >>>>>>>> Nic >>>>>>>> >>>>>>>> Sent from my HTC phone. >>>>>>>> >>>>>>>> ----- Reply message ----- >>>>>>>> From: "Michael Joyce" <jo...@apache.org> >>>>>>>> To: "nicpeder...@gmail.com" <nicpeder...@gmail.com> >>>>>>>> Cc: "dev@climate.apache.org" <dev@climate.apache.org>, " >>>>>>>> chris.a.mattm...@nasa.gov" <chris.a.mattm...@nasa.gov> >>>>>>>> Subject: New Student - Caltech-JPL Summer School on Big Data >>>>>>>> Analytics - Need Help Setting up OCW >>>>>>>> Date: Wed, Jan 14, 2015 6:47 AM >>>>>>>> >>>>>>>> Ok, that looks good. GEOS seems to have installed fine. >>>>>>>> >>>>>>>> If you go back into the directory where the install script >>>>>>>> downloaded basemap we can try to do the install again. >>>>>>>> It should be something like /path/to/climate/easy-ocw/basemap-1.0.7 >>>>>>>> >>>>>>>> Then using the Anaconda Python (be sure to check and make sure it's >>>>>>>> not the system Python or the virtualenv Python with `which python`) >>>>>>>> run: >>>>>>>> python setup.py install >>>>>>>> >>>>>>>> Then try the above basemap import to check the install. Go ahead >>>>>>>> and post the install output here as well in case we need to debug >>>>>>>> something. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- Joyce >>>>>>>> >>>>>>>> On Tue, Jan 13, 2015 at 2:36 PM, nicpeder...@gmail.com < >>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>> >>>>>>>>> Basemap test - output. >>>>>>>>> >>>>>>>>> pastebin.com/rrAzxHMu >>>>>>>>> >>>>>>>>> Nic >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ----- Reply message ----- >>>>>>>>> From: "Michael Joyce" <jo...@apache.org> >>>>>>>>> To: "nic pederson" <nicpeder...@gmail.com> >>>>>>>>> Cc: "dev@climate.apache.org" <dev@climate.apache.org>, " >>>>>>>>> chris.a.mattm...@nasa.gov" <chris.a.mattm...@nasa.gov> >>>>>>>>> Subject: New Student - Caltech-JPL Summer School on Big Data >>>>>>>>> Analytics - Need Help Setting up OCW >>>>>>>>> Date: Tue, Jan 13, 2015 1:04 PM >>>>>>>>> >>>>>>>>> So, semi-good news is that you're helping me find some small bugs >>>>>>>>> in the install script but unfortunately they're not what's causing >>>>>>>>> your >>>>>>>>> problem =) >>>>>>>>> >>>>>>>>> However, I also realized that I told you something wrong earlier. >>>>>>>>> I told you to run >>>>>>>>> >>>>>>>>> sudo echo "export PATH=\"/home/nic/climate/anaconda/bin/:$PATH\"" >>>>>>>>> >> ocw/bin/activate >>>>>>>>> >>>>>>>>> but that isn't going to do what we want. We're running the echo >>>>>>>>> command with elevated privileges but we really want to do the concat >>>>>>>>> with >>>>>>>>> elevated perms. >>>>>>>>> >>>>>>>>> echo "export PATH=\"/home/nic/climate/anaconda/bin/:$PATH\"" | >>>>>>>>> sudo tee ocw/bin/activate >>>>>>>>> >>>>>>>>> You could also put quotes around the original command I gave you >>>>>>>>> (sudo " ... ") but that can get messy with the other quotes for the >>>>>>>>> echo. >>>>>>>>> You could also edit the file manually with nano (assuming it's >>>>>>>>> installed) >>>>>>>>> with `sudo nano /path/to/file`. But try the above and hopefully >>>>>>>>> that'll >>>>>>>>> work for you. >>>>>>>>> >>>>>>>>> Now, we have hopefully fixed the first issue but not the second >>>>>>>>> issue. >>>>>>>>> >>>>>>>>> If it can't find basemap that means that the installation for it >>>>>>>>> died somewhere. Unfortunately the install_log isn't helping (one of >>>>>>>>> those >>>>>>>>> bugs I mentioned) so we might need to debug manually. First thing to >>>>>>>>> test >>>>>>>>> is that basemap really can't be found and it's not a bug in the >>>>>>>>> script. >>>>>>>>> >>>>>>>>> Try the following in a Python prompt: >>>>>>>>> from mpl_toolkits.basemap import Basemap >>>>>>>>> >>>>>>>>> This is the test they use in the actual basemap docs to test an >>>>>>>>> install. So if that doesn't work then basemap definitely isn't >>>>>>>>> installed >>>>>>>>> and it wasn't a problem with the *.py script you ran to test OCW. >>>>>>>>> >>>>>>>>> If the above failed, let's check to see if Geos got installed. >>>>>>>>> Geos is a dependency for basemap that the install script handles >>>>>>>>> first. Run >>>>>>>>> the following >>>>>>>>> >>>>>>>>> ls /usr/local/lib | grep geos >>>>>>>>> >>>>>>>>> You should see some output. If you didn't then we need to install >>>>>>>>> Geos manually. Luckily we can mostly just copy the install script >>>>>>>>> verbatim >>>>>>>>> and see if something breaks. There's a section in the >>>>>>>>> install-ubuntu.sh >>>>>>>>> script with a comment that says "#Install GEOS" that has the commands. >>>>>>>>> Otherwise we need to run the next part for basemap. However, before >>>>>>>>> you do >>>>>>>>> either of those installs, let me know what the outputs from the above >>>>>>>>> commands say and let me know if the new attempt at appending text >>>>>>>>> works. >>>>>>>>> >>>>>>>>> We will get there eventually, stick with it =) >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- Joyce >>>>>>>>> >>>>>>>>> On Tue, Jan 13, 2015 at 12:36 PM, nic pederson < >>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>> >>>>>>>>>> It did seem to band aid that part, but now it can't find baseman. >>>>>>>>>> Here's the terminal. >>>>>>>>>> >>>>>>>>>> pastebin.com/BSgt7BwW >>>>>>>>>> >>>>>>>>>> Nic >>>>>>>>>> On Jan 13, 2015 12:07 PM, "Michael Joyce" <jo...@apache.org> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> One more thing to try (and I suspect it would band-aid the >>>>>>>>>>> problem): >>>>>>>>>>> >>>>>>>>>>> Start up the virtualenv, run the following command, and see if >>>>>>>>>>> you can find the packages now. >>>>>>>>>>> >>>>>>>>>>> export PATH="/home/nic/climate/anaconda/bin/:$PATH" >>>>>>>>>>> >>>>>>>>>>> That's effectively what we're trying to get it to do by editing >>>>>>>>>>> the script, but it's not cooperating with us. That should make it >>>>>>>>>>> work, but >>>>>>>>>>> you would have to do it every time you start up the environment >>>>>>>>>>> which is >>>>>>>>>>> terribly tedious. It also doesn't address the actual problem and >>>>>>>>>>> that >>>>>>>>>>> annoys me =D >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- Joyce >>>>>>>>>>> >>>>>>>>>>> On Tue, Jan 13, 2015 at 12:02 PM, Michael Joyce < >>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>> >>>>>>>>>>>> Hrm ok. That's even more strange. >>>>>>>>>>>> >>>>>>>>>>>> So the -e flag tells the script that you want it to install >>>>>>>>>>>> virtualenv (if necessary), make a new virtualenv named 'ocw', and >>>>>>>>>>>> install >>>>>>>>>>>> some of the dependencies into there (namely the dependencies not >>>>>>>>>>>> installed >>>>>>>>>>>> by Anaconda). If you didn't pass this flag, it will have installed >>>>>>>>>>>> the >>>>>>>>>>>> dependencies into your system python. From what I can tell you >>>>>>>>>>>> probably did >>>>>>>>>>>> pass this flag? It doesn't really matter, or at least shouldn't. >>>>>>>>>>>> It's >>>>>>>>>>>> generally a good idea to not pollute the system Python as it can >>>>>>>>>>>> make your >>>>>>>>>>>> life a bit more difficult in the future when dealing with other >>>>>>>>>>>> Python >>>>>>>>>>>> dependencies/packages. >>>>>>>>>>>> >>>>>>>>>>>> There's an install log that gets written when running the >>>>>>>>>>>> script. Can you look for a file called "install_log" in the >>>>>>>>>>>> climate/easy-ocw/ folder and post the output? That will help us >>>>>>>>>>>> debug this >>>>>>>>>>>> whenever I find a few spare minutes to take a look. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- Joyce >>>>>>>>>>>> >>>>>>>>>>>> On Tue, Jan 13, 2015 at 11:28 AM, nic pederson < >>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Here's a link to what happens in terminal when I try that >>>>>>>>>>>>> command... It doesn't ask for a password >>>>>>>>>>>>> >>>>>>>>>>>>> pastebin.com/hcMNqWAa >>>>>>>>>>>>> >>>>>>>>>>>>> Also, when I'm installing ocw originally, am I supposed to use >>>>>>>>>>>>> the -e tag at the end of the command that executes the >>>>>>>>>>>>> installation? Would >>>>>>>>>>>>> that potentially cause these errors? >>>>>>>>>>>>> >>>>>>>>>>>>> Nic >>>>>>>>>>>>> On Jan 13, 2015 10:51 AM, "Michael Joyce" <jo...@apache.org> >>>>>>>>>>>>> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> @Carl, absolutely. Once I figure out when I'll have some time >>>>>>>>>>>>>> for a meeting I'll send out an email here so anyone can >>>>>>>>>>>>>> participate. Always >>>>>>>>>>>>>> happy to have more people stop by. >>>>>>>>>>>>>> >>>>>>>>>>>>>> @Nic The odd thing about what I'm seeing is that all the >>>>>>>>>>>>>> files for virtualenv are owned by root. Perhaps even more >>>>>>>>>>>>>> strange is that >>>>>>>>>>>>>> even if that is the case, running `echo "export PATH=\" >>>>>>>>>>>>>> /home/nic/climate/anaconda/bin/:$PATH\"" >> >>>>>>>>>>>>>> ocw/bin/activate` (without the `'s of course) should work just >>>>>>>>>>>>>> fine. Is it >>>>>>>>>>>>>> possible that the password you typed for sudo was incorrect? >>>>>>>>>>>>>> >>>>>>>>>>>>>> @Both of you, something that may help you get up and running >>>>>>>>>>>>>> potentially faster would be to use the VM. We have instructions >>>>>>>>>>>>>> on how to >>>>>>>>>>>>>> build the VM for you on our wiki. Consider checking that out at >>>>>>>>>>>>>> [1] as well >>>>>>>>>>>>>> while we try to figure out this problem, especially if getting >>>>>>>>>>>>>> something up >>>>>>>>>>>>>> and running urgently is key. >>>>>>>>>>>>>> >>>>>>>>>>>>>> [1] >>>>>>>>>>>>>> https://cwiki.apache.org/confluence/display/CLIMATE/OCW+VM+-+A+Self+Contained+OCW+Environment >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Tue, Jan 13, 2015 at 9:00 AM, nicpeder...@gmail.com < >>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> I'm with you on it being weird. Ok. Here's a link to that >>>>>>>>>>>>>>> output >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> pastebin.com/rA4P7eCh >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I'm not working on a VM. And the network is my own. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Sent from my HTC phone. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> ----- Reply message ----- >>>>>>>>>>>>>>> From: "Michael Joyce" <jo...@apache.org> >>>>>>>>>>>>>>> To: "nic pederson" <nicpeder...@gmail.com> >>>>>>>>>>>>>>> Cc: "chris.a.mattm...@nasa.gov" <chris.a.mattm...@nasa.gov>, >>>>>>>>>>>>>>> "dev@climate.apache.org" <dev@climate.apache.org> >>>>>>>>>>>>>>> Subject: New Student - Caltech-JPL Summer School on Big Data >>>>>>>>>>>>>>> Analytics - Need Help Setting up OCW >>>>>>>>>>>>>>> Date: Tue, Jan 13, 2015 7:34 AM >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> More than happy to do a google hangout or something similar >>>>>>>>>>>>>>> to try to resolve any issues you're having. Today is jam packed >>>>>>>>>>>>>>> for me >>>>>>>>>>>>>>> unfortunately so it would have to be a different day. Perhaps >>>>>>>>>>>>>>> someone else >>>>>>>>>>>>>>> will be able to help though. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I find it odd that you're running into permission problems >>>>>>>>>>>>>>> here. Are you running this in a VM or on a local system that >>>>>>>>>>>>>>> you have >>>>>>>>>>>>>>> control off? I'm not really sure why you wouldn't be able to >>>>>>>>>>>>>>> edit something >>>>>>>>>>>>>>> in your home dir unless root wrote something. Can you run "ls >>>>>>>>>>>>>>> -l" on the >>>>>>>>>>>>>>> ocw/bin directory and link the output? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 10:07 PM, nic pederson < >>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Can we do a team viewer or some other remote control? I am >>>>>>>>>>>>>>>> feeling a little deflated. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> N >>>>>>>>>>>>>>>> On Jan 12, 2015 9:07 PM, "nic pederson" < >>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> When I run it from the easy-ocw folder, is says permission >>>>>>>>>>>>>>>>> denied. When I run it with sudo, it says the same thing... >>>>>>>>>>>>>>>>> On Jan 12, 2015 8:51 PM, "nic pederson" < >>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> It returns: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> bash: ocw/bin/activate: No such file or directory >>>>>>>>>>>>>>>>>> On Jan 12, 2015 8:35 PM, "Michael Joyce" < >>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Try running the above command instead of using gedit. If >>>>>>>>>>>>>>>>>>> it gives you permission denied try prepending "sudo " to >>>>>>>>>>>>>>>>>>> the command and >>>>>>>>>>>>>>>>>>> typing your admin password when prompted. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 8:23 PM, nic pederson < >>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Ok. Opened it in gedit. Added the line to the end, but >>>>>>>>>>>>>>>>>>>> it won't let me save. Says it's read only >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> N >>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 8:14 PM, "Michael Joyce" < >>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> You could use an editor such as nano (not sure if this >>>>>>>>>>>>>>>>>>>>> would be installed), emacs or vim (both of which would be >>>>>>>>>>>>>>>>>>>>> potentially >>>>>>>>>>>>>>>>>>>>> challenging for you to use most likely). >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> You should be able to run the following. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> echo "export >>>>>>>>>>>>>>>>>>>>> PATH=\"/home/nic/climate/anaconda/bin/:$PATH\"" >>>>>>>>>>>>>>>>>>>>> >> ocw/bin/activate >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> ">>" redirects input to the supplied output file. In >>>>>>>>>>>>>>>>>>>>> this case the input is the result of running >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> echo "export PATH=\"/home/nic/climate/ >>>>>>>>>>>>>>>>>>>>> anaconda/bin/:$PATH\"" >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> which is simply >>>>>>>>>>>>>>>>>>>>> export PATH="/home/nic/climate/anaconda/bin/:$PATH" >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> And the output file is the activate script that we >>>>>>>>>>>>>>>>>>>>> want to adjust. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Hopefully that helps a bit. If it doesn't work let me >>>>>>>>>>>>>>>>>>>>> know. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 8:09 PM, nic pederson < >>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I didn't add the line above because I'm not quite >>>>>>>>>>>>>>>>>>>>>> sure how. How do I edit the activate file? >>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 8:03 PM, "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> That is the virtualenv one. The anaconda one should >>>>>>>>>>>>>>>>>>>>>>> be /home/nic/climate/anaconda/bin/python. Note that >>>>>>>>>>>>>>>>>>>>>>> if you added that line above you will need to >>>>>>>>>>>>>>>>>>>>>>> deactivate and reactivate the >>>>>>>>>>>>>>>>>>>>>>> virtualenv for it to take effect. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> If you want to test manually what I mentioned above >>>>>>>>>>>>>>>>>>>>>>> you could try >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> 0. Deactivate the virtualenv (just to be safe) >>>>>>>>>>>>>>>>>>>>>>> 1. initialize the virtualenv >>>>>>>>>>>>>>>>>>>>>>> 2. run `export PATH="/home/nic/climate/ >>>>>>>>>>>>>>>>>>>>>>> anaconda/bin/:$PATH"` >>>>>>>>>>>>>>>>>>>>>>> 3. run `which python` and see what you get >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 7:55 PM, nic pederson < >>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Which python produces >>>>>>>>>>>>>>>>>>>>>>>> ~/climate/easy/easy-ocw/ocw/bin/python >>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 7:42 PM, "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Ok not quite as confident now as I thought but try >>>>>>>>>>>>>>>>>>>>>>>>> this. I think you might be running into an annoying >>>>>>>>>>>>>>>>>>>>>>>>> little bug and/or a gap >>>>>>>>>>>>>>>>>>>>>>>>> in the documentation here. Try adding this to the end >>>>>>>>>>>>>>>>>>>>>>>>> of your >>>>>>>>>>>>>>>>>>>>>>>>> ocw/bin/activate file and see if that fixes this. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> 1. export >>>>>>>>>>>>>>>>>>>>>>>>> PATH=/home/nic/climate/anaconda/bin:$PATH >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> I think we're missing an export of a path in the >>>>>>>>>>>>>>>>>>>>>>>>> install script when you run a virtualenv and it's >>>>>>>>>>>>>>>>>>>>>>>>> causing the wrong python >>>>>>>>>>>>>>>>>>>>>>>>> to be called. You can check by running "which python" >>>>>>>>>>>>>>>>>>>>>>>>> and see if you get >>>>>>>>>>>>>>>>>>>>>>>>> the anaconda one or the virtualenv one. You want to >>>>>>>>>>>>>>>>>>>>>>>>> be getting the anaconda >>>>>>>>>>>>>>>>>>>>>>>>> one. Hopefully that's the problem/solution. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 7:33 PM, Michael Joyce < >>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Ah ok I think I know what the problem is. One >>>>>>>>>>>>>>>>>>>>>>>>>> second to check and see. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 7:25 PM, nic pederson < >>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Here is my bash >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Pastebin.com/7ULyyng3 >>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 7:12 PM, "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Trying running source ocw/bin/activate from >>>>>>>>>>>>>>>>>>>>>>>>>>>> ~/climate/easy-ocw and see if that works >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 7:10 PM, nic pederson < >>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> "source activate" when in >>>>>>>>>>>>>>>>>>>>>>>>>>>>> ~/climate/easy-ocw/ocw/bin >>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 7:05 PM, "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hey Nic, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> What command are you using to start the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> environment? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 7:00 PM, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com <nicpeder...@gmail.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi guys, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I was still having trouble, so just did a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> fresh install of ubuntu. Everything went fine >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> until I tried to activate >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> OCW. I get an error that says "error: no >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> environment provided" >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks again >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Sent from my HTC phone. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ----- Reply message ----- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> From: "Michael Joyce" <jo...@apache.org> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> To: "nic pederson" <nicpeder...@gmail.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cc: "dev@climate.apache.org" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> dev@climate.apache.org>, " >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Subject: New Student - Caltech-JPL Summer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> School on Big Data Analytics - Need Help >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Setting up OCW >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Date: Mon, Jan 12, 2015 2:32 PM >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You should be able to run "rm -r >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /home/nic/Learning/climate/anaconda" >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (without quotes and make sure I actually got >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that directory correct ;) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Then you should be able to run the Anaconda >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> script the same way the install-ubuntu.sh >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> script does. Namely: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> bash Anaconda-1.9.2-Linux-x86_64.sh >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> That .sh file should still be in the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> easy-ocw folder (assuming you ran >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ./install-ubuntu.sh from >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /climate/easy-ocw/). When you go through the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> install just make sure you put >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the directory where you want it instead of the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> default. From above I think >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you'll want: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /home/nic/Learning/climate/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you get stuck let us know! >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 2:08 PM, nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> pederson <nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks for looking. That's exactly what I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> did... What as the best way to wipe/reinstall? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Im fairly new to Linux and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> command line in general. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 1:51 PM, "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ok after looking around a bit and checking >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your RC my guess is that you did something >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> along the lines of: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ran install-ubuntu.sh >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Decided to move where Anaconda was >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> installed by cp-ing (or something) it >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> somewhere else >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ... >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ended up where we're at >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If that is the case then I think your >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> problem is that you can't move Anaconda >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> around after the initial install. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you want it in a different place you'll >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> need to do that at install-time. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Check this convo [1] for a bit more info. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Basically just reinstall Anaconda >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> where you want it and blow out the old >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> install just to be safe. The install >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> script forces you to install it in the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> default location. Patches are more >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> than welcome to fix this ;) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If that's not what you did then what did >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you do. Maybe a bit more info will get us >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> pointed in the right direction =) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You can also remove the following line >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from your RC. This looks like an input error >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> when running install-ubuntu.sh >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1. export >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PYTHONPATH=~Learning/climate/easy-owc/install-ubuntu.sh:~Learning/climate/easy-owc/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> install-ubuntu.sh/ocw >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [1] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://groups.google.com/a/continuum.io/forum/#!msg/anaconda/LcaXE25qElM/VKWYghrjb98J >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 1:23 PM, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .bashrc >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> pastebin.com/P4Ux1XJm >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "conda info" >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> bash: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /home/nic/Learning/climate/anaconda/bin/conda: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /home/nic/anaconda/bin/python: bad >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> interpreter: no such file or directory >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Sent from my HTC phone. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ----- Reply message ----- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> From: "Michael Joyce" <jo...@apache.org> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> To: "nic pederson" <nicpeder...@gmail.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cc: "dev@climate.apache.org" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> dev@climate.apache.org>, " >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Subject: New Student - Caltech-JPL Summer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> School on Big Data Analytics - Need Help >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Setting up OCW >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Date: Mon, Jan 12, 2015 12:58 PM >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Mkay. Can you please post your entire >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> bashrc (pastebin link would probably be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> best) and the output of "conda >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> info"? It doesn't seem to be cooperating >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with regards to where it should >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> look for conda packages. I'm thinking >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> there's some residual config from a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> previous install or I'm forgetting something >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> really obvious. Worst case we >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> might need to blow out the entire Anaconda >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> install and redo it (FUN!). >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hopefully it's just something stupid in a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> config somewhere we can update. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 12:51 PM, nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> pederson <nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /home/nic/Learning/climate/anaconda/bin/conda >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 12:47 PM, "Michael >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Joyce" <jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Strange. When you run "which conda" >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> what do you see? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 12:40 PM, nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> pederson <nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> That did it! Except now I cannot >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> activate OWC. When I activate, I get a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> line like: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> bash: (correct >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> path)/climate/anaconda/bin/conda: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /home/nic/anaconda/bin/python: bad >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> interpreter: no such file or directory >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks again for your help. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 12:08 PM, "Michael >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Joyce" <jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> No problem Nic, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You should have a line in your bashrc >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> similar to the following. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> export PATH=~/Anaconda/bin:$PATH >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you replace the assumed path with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the location where Anaconda actually is >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you should be golden. If that >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> doesn't fix if for you though let us >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> know. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 12:00 PM, nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> pederson <nicpeder...@gmail.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks guys! That sounds about >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> right. The missing module is numpy when >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> owc is activated. (It's filenames >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> when it's deactivated)... Also, I feel >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> like I may have made a bit of a mess >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of the file structure in trying to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> move/reinstall Anaconda a couple times. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks for all your help. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 11:23 AM, "Michael >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Joyce" <jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Nic (and Chris), >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm guessing from your question >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that you are installing onto Ubuntu >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with the last release of OCW (0.4). You >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> should be fine on 14.10, the old >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> scripts were only tested on 12.04 so we >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> list that explicitly. Of course there >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> is still a possibility that you might >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> run into some problems. If you're >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> pulling off the latest master then the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ubuntu script is tested on 12.04 and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 14.04. What modules are failing for >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you? If it's something like >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> numpy/scipy then you probably have an >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> issue >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with the location of the Anaconda bin >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and your path. This could be a result >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of Anaconda being installed in a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> different spot than expected or it >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> could >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> be a bug in the install scripts. If >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you're having problems with some OCW >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> modules not importing then it probably >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> a problem with the PYTHONPATH not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> being set as expected. Let us know >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> what problems you're seeing and I'm >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sure >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> we can get it sorted quickly. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 8:10 AM, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Mattmann, Chris A (3980) < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@jpl.nasa.gov> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Nic, thanks for your question >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and am forwarding to the Apache >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> OCW list for some more help! >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cheers, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Chris >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Chris Mattmann, Ph.D. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Chief Architect >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Instrument Software and Science >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Data Systems Section (398) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> NASA Jet Propulsion Laboratory >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Pasadena, CA 91109 USA >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Office: 168-519, Mailstop: 168-527 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Email: chris.a.mattm...@nasa.gov >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> WWW: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://sunset.usc.edu/~mattmann/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Adjunct Associate Professor, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Computer Science Department >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> University of Southern California, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Los Angeles, CA 90089 USA >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -----Original Message----- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> From: Nic <nicpeder...@gmail.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Date: Monday, January 12, 2015 at >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 8:08 AM >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> To: Chris Mattmann < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Subject: New Student - Caltech-JPL >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Summer School on Big Data Analytics - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Need Help Setting up OCW >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >Hi Chris! >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >I'm really excited for this >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> class, but I'm a little hung up on >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Day 1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >installations. Long story short, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I've setup PyLint and OCW, but OCW >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >seems to be unable to find some >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> modules. Could this be because I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >installed files (i suspect >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> anaconda) in the wrong folders? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >I'm running Ubuntu 14.10 (Lenovo >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> IdeaPad). I noticed that OCW install >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >instructions say that I should be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> running 12.04. I have 14.10 installed. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >I'm trying to wipe and restart >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ubuntu with 12.04 now, but am having >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >trouble getting it to boot. Can I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> run 14.10 with OCW? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >I've checked the discussion >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> boards and have done a bit of research >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >already, but not much fruit. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >Thanks so much and I look forward >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to hearing from you, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >Nic Pederson >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >541.953.1520 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >@nicpederson >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>> >>>> >>
