Lots of text is good, or at least better than what we were getting =D Let's check to see if it actually did install with:
python from mpl_toolkits.basemap import Basemap If that imports correctly then we're good. If it didn't then I'll have to look out the output from the install command to see where it died. If the above does work try running one of the examples so we can see if we managed to fix everything. -- Joyce On Wed, Jan 14, 2015 at 11:12 AM, nic pederson <nicpeder...@gmail.com> wrote: > That seemed to work :) there was a massive dump of copying going on. I > didn't see any errors. The last line run was > > customize UnixCCompiler > > ..Ok, I guess I should test the samples, but I'll wait for you to advise. > On Jan 14, 2015 10:58 AM, "Michael Joyce" <jo...@apache.org> wrote: > >> Actually I lied, I do have an idea. I just spoke with one of my coworkers >> who pointed out something to me. >> >> We're running "python setup.py install" as sudo, which means that we're >> probably ending up with roots python. Try the following: >> >> sudo /home/nic/climate/anaconda/bin/python setup.py install >> >> And let me know if that helps. >> >> >> -- Joyce >> >> On Wed, Jan 14, 2015 at 10:46 AM, Michael Joyce <jo...@apache.org> wrote: >> >>> Sigh, that is thoroughly confusing. I will try to replicate this when I >>> have some free time then. What version of Ubuntu are you using at the >>> moment? And what version of the code base are you using (0.4 or did you >>> grab the latest from master)? >>> >>> In the mean time, you might consider trying the VM to get everything >>> installed and running in an isolated environment for you. I'm really not >>> sure what to attempt at this point because I don't really know why it >>> wouldn't be finding numpy in that situation. There must be some config >>> problem somewhere but I can't for the life of me figure out what it might >>> be. >>> >>> Sorry I don't have better news. Maybe someone else on here will have >>> some insight where I don't. >>> >>> >>> -- Joyce >>> >>> On Wed, Jan 14, 2015 at 10:21 AM, nic pederson <nicpeder...@gmail.com> >>> wrote: >>> >>>> pastebin.com/kneXbeUJ >>>> On Jan 14, 2015 10:17 AM, "Michael Joyce" <jo...@apache.org> wrote: >>>> >>>>> Type >>>>> >>>>> exit() and then enter >>>>> >>>>> or control+D >>>>> >>>>> You're just stuck in the Python REPL. >>>>> >>>>> >>>>> -- Joyce >>>>> >>>>> On Wed, Jan 14, 2015 at 10:15 AM, nic pederson <nicpeder...@gmail.com> >>>>> wrote: >>>>> >>>>>> My command line starts with ">>>" >>>>>> >>>>>> How do I get out of that? >>>>>> On Jan 14, 2015 9:53 AM, "Michael Joyce" <jo...@apache.org> wrote: >>>>>> >>>>>>> Hrm ok. Good sign that we can import numpy. However, it makes no >>>>>>> sense that we end up with an import error. Try running the install >>>>>>> command >>>>>>> again and see what happens. Make sure you don't do it in a new terminal >>>>>>> or >>>>>>> anything. So do: >>>>>>> >>>>>>> which python >>>>>>> sudo python setup.py install >>>>>>> >>>>>>> from the basemap folder and post the output again if you could. >>>>>>> >>>>>>> >>>>>>> -- Joyce >>>>>>> >>>>>>> On Wed, Jan 14, 2015 at 9:39 AM, nic pederson <nicpeder...@gmail.com >>>>>>> > wrote: >>>>>>> >>>>>>>> pastebin.com/dDB1PVCz >>>>>>>> On Jan 14, 2015 9:31 AM, "Michael Joyce" <jo...@apache.org> wrote: >>>>>>>> >>>>>>>>> No problem. So to elaborate a bit for you. The problem that killed >>>>>>>>> the install when you ran it with sudo was >>>>>>>>> >>>>>>>>> "ImportError: No module named numpy" >>>>>>>>> >>>>>>>>> So when it tried to run setup.py something somewhere tried to >>>>>>>>> import the numpy library. Numpy is one of the OCW dependencies and >>>>>>>>> one of >>>>>>>>> the packages installed with Anaconda. So, if it was using the Anaconda >>>>>>>>> Python it seems weird that it wouldn't be able to import numpy. This >>>>>>>>> is why >>>>>>>>> I thought it wasn't using the Anaconda Python and had you check that. >>>>>>>>> However, `which python` seems to indicate that isn't the case. So to >>>>>>>>> confirm that we aren't crazy, run these 3 commands: >>>>>>>>> >>>>>>>>> which python >>>>>>>>> python >>>>>>>>> import numpy >>>>>>>>> >>>>>>>>> If that last command fails then it's time for us to be confused =) >>>>>>>>> >>>>>>>>> Hopefully that helps! >>>>>>>>> >>>>>>>>> >>>>>>>>> -- Joyce >>>>>>>>> >>>>>>>>> On Wed, Jan 14, 2015 at 9:21 AM, nic pederson < >>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>> >>>>>>>>>> I'm not sure I know what you mean by that. How do I run python >>>>>>>>>> and import bumpy? I apologize for my command line naivety. >>>>>>>>>> >>>>>>>>>> Nic >>>>>>>>>> On Jan 14, 2015 9:10 AM, "Michael Joyce" <jo...@apache.org> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> And if you run python and import numpy it does or doesn't fail? >>>>>>>>>>> If it's pointing to the Anaconda python when you ran the other >>>>>>>>>>> command I'm >>>>>>>>>>> not really sure why it would fail on a numpy import =/ >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- Joyce >>>>>>>>>>> >>>>>>>>>>> On Wed, Jan 14, 2015 at 8:57 AM, nicpeder...@gmail.com < >>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>> >>>>>>>>>>>> Output of which python is >>>>>>>>>>>> >>>>>>>>>>>> /home/nic/climate/anaconda/bin//python >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Sent from my HTC phone. >>>>>>>>>>>> >>>>>>>>>>>> ----- Reply message ----- >>>>>>>>>>>> From: "Michael Joyce" <jo...@apache.org> >>>>>>>>>>>> To: "nic pederson" <nicpeder...@gmail.com> >>>>>>>>>>>> Cc: "dev@climate.apache.org" <dev@climate.apache.org>, " >>>>>>>>>>>> chris.a.mattm...@nasa.gov" <chris.a.mattm...@nasa.gov> >>>>>>>>>>>> Subject: New Student - Caltech-JPL Summer School on Big Data >>>>>>>>>>>> Analytics - Need Help Setting up OCW >>>>>>>>>>>> Date: Wed, Jan 14, 2015 8:47 AM >>>>>>>>>>>> >>>>>>>>>>>> Ok the second one leads me to believe that the wrong Python is >>>>>>>>>>>> getting used. Can you check that 'python' really is the anaconda >>>>>>>>>>>> python >>>>>>>>>>>> where numpy would be installed? Namely, what is the output of >>>>>>>>>>>> `which >>>>>>>>>>>> python` and can you manually run python and import numpy without >>>>>>>>>>>> an error? >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- Joyce >>>>>>>>>>>> >>>>>>>>>>>> On Wed, Jan 14, 2015 at 8:39 AM, nic pederson < >>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> It didn't seem to like it. I also tried with sudo since it >>>>>>>>>>>>> gave permission errors. >>>>>>>>>>>>> >>>>>>>>>>>>> pastebin.com/LDbpgvWu >>>>>>>>>>>>> On Jan 14, 2015 8:29 AM, "Michael Joyce" <jo...@apache.org> >>>>>>>>>>>>> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> No it shouldn't matter where it's at. Was mostly just >>>>>>>>>>>>>> guessing where it might be off the top of my head to be honest =) >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Wed, Jan 14, 2015 at 8:26 AM, nicpeder...@gmail.com < >>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> The basemap folder is in my home directory. Should I move it >>>>>>>>>>>>>>> first? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Sent from my HTC phone. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> ----- Reply message ----- >>>>>>>>>>>>>>> From: "Michael Joyce" <jo...@apache.org> >>>>>>>>>>>>>>> To: "nicpeder...@gmail.com" <nicpeder...@gmail.com> >>>>>>>>>>>>>>> Cc: "dev@climate.apache.org" <dev@climate.apache.org>, " >>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov" <chris.a.mattm...@nasa.gov> >>>>>>>>>>>>>>> Subject: New Student - Caltech-JPL Summer School on Big Data >>>>>>>>>>>>>>> Analytics - Need Help Setting up OCW >>>>>>>>>>>>>>> Date: Wed, Jan 14, 2015 6:47 AM >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Ok, that looks good. GEOS seems to have installed fine. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> If you go back into the directory where the install script >>>>>>>>>>>>>>> downloaded basemap we can try to do the install again. >>>>>>>>>>>>>>> It should be something like >>>>>>>>>>>>>>> /path/to/climate/easy-ocw/basemap-1.0.7 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Then using the Anaconda Python (be sure to check and make >>>>>>>>>>>>>>> sure it's not the system Python or the virtualenv Python with >>>>>>>>>>>>>>> `which >>>>>>>>>>>>>>> python`) run: >>>>>>>>>>>>>>> python setup.py install >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Then try the above basemap import to check the install. Go >>>>>>>>>>>>>>> ahead and post the install output here as well in case we need >>>>>>>>>>>>>>> to debug >>>>>>>>>>>>>>> something. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Tue, Jan 13, 2015 at 2:36 PM, nicpeder...@gmail.com < >>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Basemap test - output. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> pastebin.com/rrAzxHMu >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> ----- Reply message ----- >>>>>>>>>>>>>>>> From: "Michael Joyce" <jo...@apache.org> >>>>>>>>>>>>>>>> To: "nic pederson" <nicpeder...@gmail.com> >>>>>>>>>>>>>>>> Cc: "dev@climate.apache.org" <dev@climate.apache.org>, " >>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov" <chris.a.mattm...@nasa.gov> >>>>>>>>>>>>>>>> Subject: New Student - Caltech-JPL Summer School on Big >>>>>>>>>>>>>>>> Data Analytics - Need Help Setting up OCW >>>>>>>>>>>>>>>> Date: Tue, Jan 13, 2015 1:04 PM >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> So, semi-good news is that you're helping me find some >>>>>>>>>>>>>>>> small bugs in the install script but unfortunately they're not >>>>>>>>>>>>>>>> what's >>>>>>>>>>>>>>>> causing your problem =) >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> However, I also realized that I told you something wrong >>>>>>>>>>>>>>>> earlier. I told you to run >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> sudo echo "export >>>>>>>>>>>>>>>> PATH=\"/home/nic/climate/anaconda/bin/:$PATH\"" >>>>>>>>>>>>>>>> >> ocw/bin/activate >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> but that isn't going to do what we want. We're running the >>>>>>>>>>>>>>>> echo command with elevated privileges but we really want to do >>>>>>>>>>>>>>>> the concat >>>>>>>>>>>>>>>> with elevated perms. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> echo "export PATH=\"/home/nic/climate/anaconda/bin/:$PATH\"" >>>>>>>>>>>>>>>> | sudo tee ocw/bin/activate >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> You could also put quotes around the original command I >>>>>>>>>>>>>>>> gave you (sudo " ... ") but that can get messy with the other >>>>>>>>>>>>>>>> quotes for >>>>>>>>>>>>>>>> the echo. You could also edit the file manually with nano >>>>>>>>>>>>>>>> (assuming it's >>>>>>>>>>>>>>>> installed) with `sudo nano /path/to/file`. But try the above >>>>>>>>>>>>>>>> and hopefully >>>>>>>>>>>>>>>> that'll work for you. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Now, we have hopefully fixed the first issue but not the >>>>>>>>>>>>>>>> second issue. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> If it can't find basemap that means that the installation >>>>>>>>>>>>>>>> for it died somewhere. Unfortunately the install_log isn't >>>>>>>>>>>>>>>> helping (one of >>>>>>>>>>>>>>>> those bugs I mentioned) so we might need to debug manually. >>>>>>>>>>>>>>>> First thing to >>>>>>>>>>>>>>>> test is that basemap really can't be found and it's not a bug >>>>>>>>>>>>>>>> in the script. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Try the following in a Python prompt: >>>>>>>>>>>>>>>> from mpl_toolkits.basemap import Basemap >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> This is the test they use in the actual basemap docs to >>>>>>>>>>>>>>>> test an install. So if that doesn't work then basemap >>>>>>>>>>>>>>>> definitely isn't >>>>>>>>>>>>>>>> installed and it wasn't a problem with the *.py script you ran >>>>>>>>>>>>>>>> to test OCW. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> If the above failed, let's check to see if Geos got >>>>>>>>>>>>>>>> installed. Geos is a dependency for basemap that the install >>>>>>>>>>>>>>>> script handles >>>>>>>>>>>>>>>> first. Run the following >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> ls /usr/local/lib | grep geos >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> You should see some output. If you didn't then we need to >>>>>>>>>>>>>>>> install Geos manually. Luckily we can mostly just copy the >>>>>>>>>>>>>>>> install script >>>>>>>>>>>>>>>> verbatim and see if something breaks. There's a section in the >>>>>>>>>>>>>>>> install-ubuntu.sh script with a comment that says "#Install >>>>>>>>>>>>>>>> GEOS" that has >>>>>>>>>>>>>>>> the commands. Otherwise we need to run the next part for >>>>>>>>>>>>>>>> basemap. However, >>>>>>>>>>>>>>>> before you do either of those installs, let me know what the >>>>>>>>>>>>>>>> outputs from >>>>>>>>>>>>>>>> the above commands say and let me know if the new attempt at >>>>>>>>>>>>>>>> appending text >>>>>>>>>>>>>>>> works. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> We will get there eventually, stick with it =) >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Tue, Jan 13, 2015 at 12:36 PM, nic pederson < >>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> It did seem to band aid that part, but now it can't find >>>>>>>>>>>>>>>>> baseman. Here's the terminal. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> pastebin.com/BSgt7BwW >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>>>> On Jan 13, 2015 12:07 PM, "Michael Joyce" < >>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> One more thing to try (and I suspect it would band-aid >>>>>>>>>>>>>>>>>> the problem): >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Start up the virtualenv, run the following command, and >>>>>>>>>>>>>>>>>> see if you can find the packages now. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> export PATH="/home/nic/climate/anaconda/bin/:$PATH" >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> That's effectively what we're trying to get it to do by >>>>>>>>>>>>>>>>>> editing the script, but it's not cooperating with us. That >>>>>>>>>>>>>>>>>> should make it >>>>>>>>>>>>>>>>>> work, but you would have to do it every time you start up >>>>>>>>>>>>>>>>>> the environment >>>>>>>>>>>>>>>>>> which is terribly tedious. It also doesn't address the >>>>>>>>>>>>>>>>>> actual problem and >>>>>>>>>>>>>>>>>> that annoys me =D >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Tue, Jan 13, 2015 at 12:02 PM, Michael Joyce < >>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Hrm ok. That's even more strange. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> So the -e flag tells the script that you want it to >>>>>>>>>>>>>>>>>>> install virtualenv (if necessary), make a new virtualenv >>>>>>>>>>>>>>>>>>> named 'ocw', and >>>>>>>>>>>>>>>>>>> install some of the dependencies into there (namely the >>>>>>>>>>>>>>>>>>> dependencies not >>>>>>>>>>>>>>>>>>> installed by Anaconda). If you didn't pass this flag, it >>>>>>>>>>>>>>>>>>> will have >>>>>>>>>>>>>>>>>>> installed the dependencies into your system python. From >>>>>>>>>>>>>>>>>>> what I can tell >>>>>>>>>>>>>>>>>>> you probably did pass this flag? It doesn't really matter, >>>>>>>>>>>>>>>>>>> or at least >>>>>>>>>>>>>>>>>>> shouldn't. It's generally a good idea to not pollute the >>>>>>>>>>>>>>>>>>> system Python as >>>>>>>>>>>>>>>>>>> it can make your life a bit more difficult in the future >>>>>>>>>>>>>>>>>>> when dealing with >>>>>>>>>>>>>>>>>>> other Python dependencies/packages. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> There's an install log that gets written when running >>>>>>>>>>>>>>>>>>> the script. Can you look for a file called "install_log" in >>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>> climate/easy-ocw/ folder and post the output? That will >>>>>>>>>>>>>>>>>>> help us debug this >>>>>>>>>>>>>>>>>>> whenever I find a few spare minutes to take a look. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Tue, Jan 13, 2015 at 11:28 AM, nic pederson < >>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Here's a link to what happens in terminal when I try >>>>>>>>>>>>>>>>>>>> that command... It doesn't ask for a password >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> pastebin.com/hcMNqWAa >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Also, when I'm installing ocw originally, am I supposed >>>>>>>>>>>>>>>>>>>> to use the -e tag at the end of the command that executes >>>>>>>>>>>>>>>>>>>> the installation? >>>>>>>>>>>>>>>>>>>> Would that potentially cause these errors? >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>>>>>>> On Jan 13, 2015 10:51 AM, "Michael Joyce" < >>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> @Carl, absolutely. Once I figure out when I'll have >>>>>>>>>>>>>>>>>>>>> some time for a meeting I'll send out an email here so >>>>>>>>>>>>>>>>>>>>> anyone can >>>>>>>>>>>>>>>>>>>>> participate. Always happy to have more people stop by. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> @Nic The odd thing about what I'm seeing is that all >>>>>>>>>>>>>>>>>>>>> the files for virtualenv are owned by root. Perhaps even >>>>>>>>>>>>>>>>>>>>> more strange is >>>>>>>>>>>>>>>>>>>>> that even if that is the case, running `echo "export >>>>>>>>>>>>>>>>>>>>> PATH=\"/home/nic/climate/anaconda/bin/:$PATH\"" >> >>>>>>>>>>>>>>>>>>>>> ocw/bin/activate` (without the `'s of course) should work >>>>>>>>>>>>>>>>>>>>> just fine. Is it >>>>>>>>>>>>>>>>>>>>> possible that the password you typed for sudo was >>>>>>>>>>>>>>>>>>>>> incorrect? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> @Both of you, something that may help you get up and >>>>>>>>>>>>>>>>>>>>> running potentially faster would be to use the VM. We >>>>>>>>>>>>>>>>>>>>> have instructions on >>>>>>>>>>>>>>>>>>>>> how to build the VM for you on our wiki. Consider >>>>>>>>>>>>>>>>>>>>> checking that out at [1] >>>>>>>>>>>>>>>>>>>>> as well while we try to figure out this problem, >>>>>>>>>>>>>>>>>>>>> especially if getting >>>>>>>>>>>>>>>>>>>>> something up and running urgently is key. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> [1] >>>>>>>>>>>>>>>>>>>>> https://cwiki.apache.org/confluence/display/CLIMATE/OCW+VM+-+A+Self+Contained+OCW+Environment >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Tue, Jan 13, 2015 at 9:00 AM, nicpeder...@gmail.com >>>>>>>>>>>>>>>>>>>>> <nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I'm with you on it being weird. Ok. Here's a link to >>>>>>>>>>>>>>>>>>>>>> that output >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> pastebin.com/rA4P7eCh >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I'm not working on a VM. And the network is my own. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Sent from my HTC phone. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> ----- Reply message ----- >>>>>>>>>>>>>>>>>>>>>> From: "Michael Joyce" <jo...@apache.org> >>>>>>>>>>>>>>>>>>>>>> To: "nic pederson" <nicpeder...@gmail.com> >>>>>>>>>>>>>>>>>>>>>> Cc: "chris.a.mattm...@nasa.gov" < >>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov>, "dev@climate.apache.org" >>>>>>>>>>>>>>>>>>>>>> <dev@climate.apache.org> >>>>>>>>>>>>>>>>>>>>>> Subject: New Student - Caltech-JPL Summer School on >>>>>>>>>>>>>>>>>>>>>> Big Data Analytics - Need Help Setting up OCW >>>>>>>>>>>>>>>>>>>>>> Date: Tue, Jan 13, 2015 7:34 AM >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> More than happy to do a google hangout or something >>>>>>>>>>>>>>>>>>>>>> similar to try to resolve any issues you're having. >>>>>>>>>>>>>>>>>>>>>> Today is jam packed for >>>>>>>>>>>>>>>>>>>>>> me unfortunately so it would have to be a different day. >>>>>>>>>>>>>>>>>>>>>> Perhaps someone >>>>>>>>>>>>>>>>>>>>>> else will be able to help though. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I find it odd that you're running into permission >>>>>>>>>>>>>>>>>>>>>> problems here. Are you running this in a VM or on a >>>>>>>>>>>>>>>>>>>>>> local system that you >>>>>>>>>>>>>>>>>>>>>> have control off? I'm not really sure why you wouldn't >>>>>>>>>>>>>>>>>>>>>> be able to edit >>>>>>>>>>>>>>>>>>>>>> something in your home dir unless root wrote something. >>>>>>>>>>>>>>>>>>>>>> Can you run "ls -l" >>>>>>>>>>>>>>>>>>>>>> on the ocw/bin directory and link the output? >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 10:07 PM, nic pederson < >>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Can we do a team viewer or some other remote >>>>>>>>>>>>>>>>>>>>>>> control? I am feeling a little deflated. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> N >>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 9:07 PM, "nic pederson" < >>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> When I run it from the easy-ocw folder, is says >>>>>>>>>>>>>>>>>>>>>>>> permission denied. When I run it with sudo, it says >>>>>>>>>>>>>>>>>>>>>>>> the same thing... >>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 8:51 PM, "nic pederson" < >>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> It returns: >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> bash: ocw/bin/activate: No such file or directory >>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 8:35 PM, "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Try running the above command instead of using >>>>>>>>>>>>>>>>>>>>>>>>>> gedit. If it gives you permission denied try >>>>>>>>>>>>>>>>>>>>>>>>>> prepending "sudo " to the >>>>>>>>>>>>>>>>>>>>>>>>>> command and typing your admin password when prompted. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 8:23 PM, nic pederson < >>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Ok. Opened it in gedit. Added the line to the >>>>>>>>>>>>>>>>>>>>>>>>>>> end, but it won't let me save. Says it's read only >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> N >>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 8:14 PM, "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> You could use an editor such as nano (not sure >>>>>>>>>>>>>>>>>>>>>>>>>>>> if this would be installed), emacs or vim (both of >>>>>>>>>>>>>>>>>>>>>>>>>>>> which would be >>>>>>>>>>>>>>>>>>>>>>>>>>>> potentially challenging for you to use most >>>>>>>>>>>>>>>>>>>>>>>>>>>> likely). >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> You should be able to run the following. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> echo "export >>>>>>>>>>>>>>>>>>>>>>>>>>>> PATH=\"/home/nic/climate/anaconda/bin/:$PATH\"" >>>>>>>>>>>>>>>>>>>>>>>>>>>> >> ocw/bin/activate >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> ">>" redirects input to the supplied output >>>>>>>>>>>>>>>>>>>>>>>>>>>> file. In this case the input is the result of >>>>>>>>>>>>>>>>>>>>>>>>>>>> running >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> echo "export PATH=\"/home/nic/climate/ >>>>>>>>>>>>>>>>>>>>>>>>>>>> anaconda/bin/:$PATH\"" >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> which is simply >>>>>>>>>>>>>>>>>>>>>>>>>>>> export PATH="/home/nic/climate/ >>>>>>>>>>>>>>>>>>>>>>>>>>>> anaconda/bin/:$PATH" >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> And the output file is the activate script that >>>>>>>>>>>>>>>>>>>>>>>>>>>> we want to adjust. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Hopefully that helps a bit. If it doesn't work >>>>>>>>>>>>>>>>>>>>>>>>>>>> let me know. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 8:09 PM, nic pederson < >>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> I didn't add the line above because I'm not >>>>>>>>>>>>>>>>>>>>>>>>>>>>> quite sure how. How do I edit the activate file? >>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 8:03 PM, "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> That is the virtualenv one. The anaconda one >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> should be /home/nic/climate/anaconda/bin/python. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Note that if you added that line above you will >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> need to deactivate and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> reactivate the virtualenv for it to take effect. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you want to test manually what I mentioned >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> above you could try >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0. Deactivate the virtualenv (just to be safe) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1. initialize the virtualenv >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2. run `export PATH="/home/nic/climate/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> anaconda/bin/:$PATH"` >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 3. run `which python` and see what you get >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 7:55 PM, nic pederson >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Which python produces >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ~/climate/easy/easy-ocw/ocw/bin/python >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 7:42 PM, "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ok not quite as confident now as I thought >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> but try this. I think you might be running >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> into an annoying little bug >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and/or a gap in the documentation here. Try >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> adding this to the end of your >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ocw/bin/activate file and see if that fixes >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> this. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1. export >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PATH=/home/nic/climate/anaconda/bin:$PATH >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I think we're missing an export of a path >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> in the install script when you run a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> virtualenv and it's causing the wrong >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> python to be called. You can check by running >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "which python" and see if you >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> get the anaconda one or the virtualenv one. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You want to be getting the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> anaconda one. Hopefully that's the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> problem/solution. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 7:33 PM, Michael >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Joyce <jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ah ok I think I know what the problem is. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> One second to check and see. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 7:25 PM, nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> pederson <nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Here is my bash >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Pastebin.com/7ULyyng3 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 7:12 PM, "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Trying running source ocw/bin/activate >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from ~/climate/easy-ocw and see if that >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> works >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 7:10 PM, nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> pederson <nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "source activate" when in >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ~/climate/easy-ocw/ocw/bin >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 7:05 PM, "Michael >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Joyce" <jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hey Nic, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> What command are you using to start >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the environment? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 7:00 PM, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi guys, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I was still having trouble, so just >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> did a fresh install of ubuntu. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Everything went fine until I tried to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> activate OCW. I get an error that says >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "error: no environment provided" >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks again >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Sent from my HTC phone. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ----- Reply message ----- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> From: "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> To: "nic pederson" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cc: "dev@climate.apache.org" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> dev@climate.apache.org>, " >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Subject: New Student - Caltech-JPL >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Summer School on Big Data Analytics - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Need Help Setting up OCW >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Date: Mon, Jan 12, 2015 2:32 PM >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You should be able to run "rm -r >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /home/nic/Learning/climate/anaconda" >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (without quotes and make sure I actually >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> got that directory correct ;) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Then you should be able to run the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anaconda script the same way the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> install-ubuntu.sh script does. Namely: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> bash Anaconda-1.9.2-Linux-x86_64.sh >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> That .sh file should still be in the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> easy-ocw folder (assuming you ran >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ./install-ubuntu.sh from >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /climate/easy-ocw/). When you go through >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the install just make sure you put >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the directory where you want it instead >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of the default. From above I think >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you'll want: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /home/nic/Learning/climate/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you get stuck let us know! >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 2:08 PM, nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> pederson <nicpeder...@gmail.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks for looking. That's exactly >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> what I did... What as the best way to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wipe/reinstall? Im fairly new to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Linux and command line in general. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 1:51 PM, "Michael >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Joyce" <jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ok after looking around a bit and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> checking your RC my guess is that you >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> did something along the lines of: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ran install-ubuntu.sh >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Decided to move where Anaconda was >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> installed by cp-ing (or something) it >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> somewhere else >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ... >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ended up where we're at >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If that is the case then I think >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your problem is that you can't move >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anaconda around after the initial >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> install. If you want it in a different >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> place you'll need to do that at >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> install-time. Check this convo [1] for >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> a bit more info. Basically just >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> reinstall Anaconda where you want it >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and blow out the old install just to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> be safe. The install script forces you >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to install it in the default >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> location. Patches are more than >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> welcome to fix this ;) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If that's not what you did then >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> what did you do. Maybe a bit more info >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> will get us pointed in the right >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> direction =) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You can also remove the following >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> line from your RC. This looks like an >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> input error when running >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> install-ubuntu.sh >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1. export >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PYTHONPATH=~Learning/climate/easy-owc/install-ubuntu.sh:~Learning/climate/easy-owc/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> install-ubuntu.sh/ocw >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [1] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://groups.google.com/a/continuum.io/forum/#!msg/anaconda/LcaXE25qElM/VKWYghrjb98J >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 1:23 PM, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .bashrc >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> pastebin.com/P4Ux1XJm >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "conda info" >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> bash: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /home/nic/Learning/climate/anaconda/bin/conda: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /home/nic/anaconda/bin/python: bad >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> interpreter: no such file or directory >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Sent from my HTC phone. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ----- Reply message ----- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> From: "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> To: "nic pederson" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cc: "dev@climate.apache.org" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> dev@climate.apache.org>, " >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Subject: New Student - Caltech-JPL >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Summer School on Big Data Analytics - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Need Help Setting up OCW >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Date: Mon, Jan 12, 2015 12:58 PM >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Mkay. Can you please post your >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> entire bashrc (pastebin link would >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> probably be best) and the output of >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "conda info"? It doesn't seem to be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> cooperating with regards to where it >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> should look for conda packages. I'm >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thinking there's some residual config >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from a previous install or I'm >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> forgetting something really obvious. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Worst >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> case we might need to blow out the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> entire Anaconda install and redo it >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (FUN!). Hopefully it's just something >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> stupid in a config somewhere we can >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> update. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 12:51 PM, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nic pederson < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /home/nic/Learning/climate/anaconda/bin/conda >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 12:47 PM, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "Michael Joyce" <jo...@apache.org> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Strange. When you run "which >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> conda" what do you see? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 12:40 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PM, nic pederson < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> That did it! Except now I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> cannot activate OWC. When I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> activate, I get a line like: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> bash: (correct >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> path)/climate/anaconda/bin/conda: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /home/nic/anaconda/bin/python: bad >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> interpreter: no such file or >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> directory >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks again for your help. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 12:08 PM, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> No problem Nic, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You should have a line in your >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> bashrc similar to the following. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> export >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PATH=~/Anaconda/bin:$PATH >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you replace the assumed >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> path with the location where >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anaconda actually is you should >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> be golden. If >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that doesn't fix if for you >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> though let us know. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 12:00 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PM, nic pederson < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks guys! That sounds >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> about right. The missing module >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> is numpy when owc is activated. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (It's >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> filenames when it's >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> deactivated)... Also, I feel >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> like I may have made a bit >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of a mess of the file structure >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> in trying to move/reinstall >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anaconda a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> couple times. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks for all your help. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 11:23 AM, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Nic (and Chris), >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm guessing from your >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> question that you are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> installing onto Ubuntu with the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> last release of OCW >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (0.4). You should be fine on >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 14.10, the old scripts were >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> only tested on >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 12.04 so we list that >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> explicitly. Of course there is >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> still a possibility >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that you might run into some >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> problems. If you're pulling off >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the latest >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> master then the Ubuntu script >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> is tested on 12.04 and 14.04. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> What modules >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> are failing for you? If it's >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> something like numpy/scipy then >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you probably >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> have an issue with the location >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of the Anaconda bin and your >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> path. This >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> could be a result of Anaconda >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> being installed in a different >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> spot than >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> expected or it could be a bug >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> in the install scripts. If >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you're having >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> problems with some OCW modules >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not importing then it probably >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> a problem >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with the PYTHONPATH not being >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> set as expected. Let us know >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> what problems >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you're seeing and I'm sure we >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> can get it sorted quickly. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 8:10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> AM, Mattmann, Chris A (3980) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@jpl.nasa.gov >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Nic, thanks for your >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> question and am forwarding to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the Apache >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> OCW list for some more help! >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cheers, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Chris >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Chris Mattmann, Ph.D. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Chief Architect >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Instrument Software and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Science Data Systems Section >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (398) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> NASA Jet Propulsion >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Laboratory Pasadena, CA 91109 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> USA >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Office: 168-519, Mailstop: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 168-527 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Email: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> WWW: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://sunset.usc.edu/~mattmann/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Adjunct Associate >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Professor, Computer Science >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Department >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> University of Southern >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> California, Los Angeles, CA >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 90089 USA >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -----Original Message----- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> From: Nic < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Date: Monday, January 12, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015 at 8:08 AM >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> To: Chris Mattmann < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Subject: New Student - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Caltech-JPL Summer School on >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Big Data Analytics - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Need Help Setting up OCW >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >Hi Chris! >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >I'm really excited for >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> this class, but I'm a little >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> hung up on Day 1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >installations. Long story >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> short, I've setup PyLint and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> OCW, but OCW >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >seems to be unable to find >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> some modules. Could this be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> because I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >installed files (i suspect >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> anaconda) in the wrong folders? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >I'm running Ubuntu 14.10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (Lenovo IdeaPad). I noticed >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that OCW install >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >instructions say that I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> should be running 12.04. I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> have 14.10 installed. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >I'm trying to wipe and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> restart Ubuntu with 12.04 now, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> but am having >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >trouble getting it to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> boot. Can I run 14.10 with OCW? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >I've checked the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> discussion boards and have >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> done a bit of research >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >already, but not much >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> fruit. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >Thanks so much and I look >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> forward to hearing from you, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >Nic Pederson >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >541.953.1520 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >@nicpederson >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>> >>>>>>> >>>>> >>> >>
