Hi all, I'm trying to to test Private Gateway on our production (actually on DEV first :) ) setup, of ACS 4.5, but I'm hitting some strange issues during actual creation of PV GTW.
My setup is the following: ACS 4.5, advanced zone KVM (ubuntu 14) mgmt network: KVM label/name: cloudbr0 sec. stor.network KMV label/name: cloudbr2 guest network KVM label/name: bond0.950 (we use vxlans, so this is apropriate...) public network KVM label/name: cloudbr3 This above is all fine, but when adding PRIV.GTW, ACS tries to provision new vlan interface (later with bridge...) on top of selected physical interface (from the list above) - which in my case is impossible, as it seems. So I decided to add addional Physical Network (name: bond0), so I expect ACS will provision i.e. bond0.999 vlan interface for one PRIV.GTW for testing purposes (vlan 999) PROBLEM: - in running zone, I need to disable it, then I use CloudMonkey to add zone: * create physicalnetwork name=bond0 broadcastdomainrange=zone zoneid=d27f6354-a715-40c7-8322-a31091f97699 isolationmethod=vlan Afterwards I do enable the zone: update physicalnetwork state=Enabled id=3424e392-e0a1-4c21-81d9-db69acbe6c8e First command above, does NOT update DB table cloud.physical_network_isolation_methods with new record, so when you list network it dont mentions isolation_method. OK, I edit DB directly, and create new row referencing new network by ID, and vlan set as isolation method. BTW, table cloud.physical_network_traffic_types is not populated, which I assume is OK/good since I don't want any normal traffci (mgmt/guest.public/storage) to go over this physical net - but again this might be the root of problems ? Since the only guest network is on PIF bond0.950 When I try to create PRIV.GTW, ACS does some magic, and again tries to provision vlan 999 interface (example vlan from above) on bond0.950 (guest network) (bond0.950.999) I checked the logs (attached below) and it does trie to provision GTW on new physical network really. I'm assuming, that maybe since no values for new bond0 network inside table cloud.physical_network_traffic_types is populated, that than ACS fails back to only available guest network, and that is bond0.950 - also I recall we need to define KVM label so the ACS will actaully know on which interface to use... (which is missing from DB for new bond0 network, as explained...) I checked the logs, and didn't see any intersting stuff really (perhaps I'm missing something...) https://pastebin.com/MZXrK31M I would really appreciate any help, since I dont know which direction to go now... -- Andrija Panić
