Ajith, You are missing "-p PORTMASK" command line argument. Since you are binding two ports to IGB_UIO, you should add -p 0x3 to the command line. You can check the example command from sample applications user guide. $ ./build/l2fwd -c 1 -n 4 -- -p 3
Regards, Vivek On Fri, Apr 11, 2014 at 9:34 AM, Ajith Adapa <ajith.adapa at gmail.com> wrote: > Hi, > > I am just trying out DPDK in a fedora 18 KVM guest and have an issue when I > am trying l2fwd application. > > I am binding eth1, eth2 interfaces using below commands > > ./igb_uio_bind.py --bind=igb_uio eth1 > ./igb_uio_bind.py --bind=igb_uio eth2 > > When I run l2fwd app I get following error > > ./l2fwd -c 1 -n 4 > EAL: Cannot read numa node link for lcore 0 - using physical package id > instead > EAL: Detected lcore 0 as core 0 on socket 0 > EAL: Setting up memory... > EAL: cannot open /proc/self/numa_maps, consider that all memory is in > socket_id 0 > EAL: Ask a virtual area of 0x18800000 bytes > EAL: Virtual area found at 0x9dc00000 (size = 0x18800000) > EAL: Ask a virtual area of 0x400000 bytes > EAL: Virtual area found at 0x9d400000 (size = 0x400000) > EAL: Ask a virtual area of 0x400000 bytes > EAL: Virtual area found at 0x9cc00000 (size = 0x400000) > EAL: Requesting 100 pages of size 4MB from socket 0 > EAL: TSC frequency is ~3191735 KHz > EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using unreliable > clock cycles ! > EAL: Master core 0 is ready (tid=b7782800) > EAL: PCI device 0000:00:03.0 on NUMA socket -1 > EAL: probe driver: 1af4:1000 rte_virtio_pmd > EAL: 0000:00:03.0 not managed by UIO driver, skipping > EAL: PCI device 0000:00:07.0 on NUMA socket -1 > EAL: probe driver: 8086:100e rte_em_pmd > EAL: PCI memory mapped at 0xb7732000 > EAL: PCI device 0000:00:08.0 on NUMA socket -1 > EAL: probe driver: 8086:100e rte_em_pmd > EAL: PCI memory mapped at 0xb7712000 > Skipping disabled port 0 > Skipping disabled port 1 > EAL: Error - exiting with code: 1 > Cause: All available ports are disabled. Please set portmask. > > Dmesg logs after binding eth1 and eth2 to igb_uio > > [ 5.700591] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow > Control: RX > [ 5.733457] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow > Control: RX > [ 55.835017] igb_uio: module verification failed: signature and/or > required key missing - tainting kernel > [ 55.835888] Use MSIX interrupt by default > [ 56.035098] igb_uio 0000:00:07.0: setting latency timer to 64 > [ 56.035123] fail to enable pci msix, or not enough msix entries > [ 56.035492] uio device registered with irq a > [ 56.184789] igb_uio 0000:00:08.0: setting latency timer to 64 > [ 56.184811] fail to enable pci msix, or not enough msix entries > [ 56.184969] uio device registered with irq b > [ 589.675041] Bits 55-60 of /proc/PID/pagemap entries are about to stop > being page-shift some time soon. See the linux/Documentation/vm/pagemap.txt > for details. > > Can anyone point me to right direction regarding where I am doing the > mistake ? > > Regards, > Ajith >
