Fixes: ecb160456aed ("net/mlx5: add device parameter for MPRQ stride size")
Cc: akozy...@mellanox.comSigned-off-by: Ali Alnubani <alia...@mellanox.com> --- doc/guides/nics/mlx5.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst index b51aa67a7..4b6d8fb4d 100644 --- a/doc/guides/nics/mlx5.rst +++ b/doc/guides/nics/mlx5.rst @@ -489,7 +489,7 @@ Driver options value is not in the range of device capability, the default value will be set with a warning message. The default value is 11 which is 2048 bytes per a stride, valid only if ``mprq_en`` is set. With ``mprq_log_stride_size`` set - it is possible for a pcaket to span across multiple strides. This mode allows + it is possible for a packet to span across multiple strides. This mode allows support of jumbo frames (9K) with MPRQ. The memcopy of some packets (or part of a packet if Rx scatter is configured) may be required in case there is no space left for a head room at the end of a stride which incurs some -- 2.27.0
