On 10/13/2020 2:45 PM, Andrew Rybchenko wrote:
Alveo SN1000 family is SmartNICs based on EF100 architecture.
Is "Alveo SN1000" and "Riverhead" are same device?
Signed-off-by: Andrew Rybchenko <[email protected]>
---
doc/guides/nics/sfc_efx.rst | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/doc/guides/nics/sfc_efx.rst b/doc/guides/nics/sfc_efx.rst
index c89484d473..959b52c1c3 100644
--- a/doc/guides/nics/sfc_efx.rst
+++ b/doc/guides/nics/sfc_efx.rst
@@ -9,8 +9,9 @@ Solarflare libefx-based Poll Mode Driver
========================================
The SFC EFX PMD (**librte_pmd_sfc_efx**) provides poll mode driver support
-for **Solarflare SFN7xxx and SFN8xxx** family of 10/40 Gbps adapters and
-**Solarflare XtremeScale X2xxx** family of 10/25/40/50/100 Gbps adapters.
+for **Solarflare SFN7xxx and SFN8xxx** family of 10/40 Gbps adapters,
+**Solarflare XtremeScale X2xxx** family of 10/25/40/50/100 Gbps adapters and
+**Alveo SN1000 SmartNICs** family of 10/25/40/50/100 Gbps adapters.
SFC EFX PMD has support for the latest Linux and FreeBSD operating systems.
Again does web page should be updated too?
More information can be found at `Solarflare Communications website
@@ -219,6 +220,10 @@ conditions is met:
Supported NICs
--------------
+- Xilinx Adapters:
+
+ - Alveo SN1022 SmartNIC
+
Can you provide a link for the device? I didn't able to find it by a simple
search.
IF you can provide updates, I can squash to the set later.
- Solarflare XtremeScale Adapters:
- Solarflare X2522 Dual Port SFP28 10/25GbE Adapter
@@ -351,10 +356,11 @@ boolean parameters value.
- ``fw_variant`` [dont-care|full-feature|ultra-low-latency|
capture-packed-stream|dpdk] (default **dont-care**)
- Choose the preferred firmware variant to use. In order for the selected
- option to have an effect, the **sfboot** utility must be configured with the
- **auto** firmware-variant option. The preferred firmware variant applies to
- all ports on the NIC.
+ Choose the preferred firmware variant to use.
+ The parameter is supported for SFN7xxX, SFN8xxx and X2xxx families only.
+ In order for the selected option to have an effect, the **sfboot** utility
+ must be configured with the **auto** firmware-variant option.
+ The preferred firmware variant applies to all ports on the NIC.
**dont-care** ensures that the driver can attach to an unprivileged
function.
The datapath firmware type to use is controlled by the **sfboot**
utility.
