On 10/14/20 1:41 PM, Ferruh Yigit wrote: > On 10/13/2020 2:45 PM, Andrew Rybchenko wrote: >> Alveo SN1000 family is SmartNICs based on EF100 architecture. > > Is "Alveo SN1000" and "Riverhead" are same device?
Yes. >> >> Signed-off-by: Andrew Rybchenko <[email protected]> >> --- >> doc/guides/nics/sfc_efx.rst | 18 ++++++++++++------ >> 1 file changed, 12 insertions(+), 6 deletions(-) >> >> diff --git a/doc/guides/nics/sfc_efx.rst b/doc/guides/nics/sfc_efx.rst >> index c89484d473..959b52c1c3 100644 >> --- a/doc/guides/nics/sfc_efx.rst >> +++ b/doc/guides/nics/sfc_efx.rst >> @@ -9,8 +9,9 @@ Solarflare libefx-based Poll Mode Driver >> ======================================== >> The SFC EFX PMD (**librte_pmd_sfc_efx**) provides poll mode driver >> support >> -for **Solarflare SFN7xxx and SFN8xxx** family of 10/40 Gbps adapters and >> -**Solarflare XtremeScale X2xxx** family of 10/25/40/50/100 Gbps >> adapters. >> +for **Solarflare SFN7xxx and SFN8xxx** family of 10/40 Gbps adapters, >> +**Solarflare XtremeScale X2xxx** family of 10/25/40/50/100 Gbps >> adapters and >> +**Alveo SN1000 SmartNICs** family of 10/25/40/50/100 Gbps adapters. >> SFC EFX PMD has support for the latest Linux and FreeBSD operating >> systems. >> > > Again does web page should be updated too? Yes, I will send dpdk-web patch to add it. Thanks for the reminder. > >> More information can be found at `Solarflare Communications website >> @@ -219,6 +220,10 @@ conditions is met: >> Supported NICs >> -------------- >> +- Xilinx Adapters: >> + >> + - Alveo SN1022 SmartNIC >> + > > Can you provide a link for the device? I didn't able to find it by a > simple search. Hm, never tried. I'll try to find out and come back. > > IF you can provide updates, I can squash to the set later. Thanks. > >> - Solarflare XtremeScale Adapters: >> - Solarflare X2522 Dual Port SFP28 10/25GbE Adapter >> @@ -351,10 +356,11 @@ boolean parameters value. >> - ``fw_variant`` [dont-care|full-feature|ultra-low-latency| >> capture-packed-stream|dpdk] (default **dont-care**) >> - Choose the preferred firmware variant to use. In order for the >> selected >> - option to have an effect, the **sfboot** utility must be configured >> with the >> - **auto** firmware-variant option. The preferred firmware variant >> applies to >> - all ports on the NIC. >> + Choose the preferred firmware variant to use. >> + The parameter is supported for SFN7xxX, SFN8xxx and X2xxx families >> only. >> + In order for the selected option to have an effect, the **sfboot** >> utility >> + must be configured with the **auto** firmware-variant option. >> + The preferred firmware variant applies to all ports on the NIC. >> **dont-care** ensures that the driver can attach to an >> unprivileged function. >> The datapath firmware type to use is controlled by the **sfboot** >> utility. >> >
