Add rl_update and packet_pacing_rate_limit_index fields to mlx5_devx_modify_sq_attr. When rl_update is set, the modify SQ command sets modify_bitmask bit 0 and writes the PP index into the SQ context, allowing dynamic rate changes on a live RDY SQ without teardown.
modify_sq_in.modify_bitmask[0x40] bit 0 controls the packet_pacing_rate_limit_index. Supported hardware: - ConnectX-6 Dx: per-SQ rate via packet_pacing_rate_limit_index - ConnectX-7/8: same SQ context field, also supports wait-on-time - BlueField-2/3: same modify_sq command support Not supported: - ConnectX-5: supports packet_pacing but only at SQ creation time, dynamic modify_bitmask update may not be supported on all FW - ConnectX-4 Lx and earlier: no packet_pacing support Signed-off-by: Vincent Jardin <[email protected]> --- drivers/common/mlx5/mlx5_devx_cmds.c | 5 +++++ drivers/common/mlx5/mlx5_devx_cmds.h | 3 +++ 2 files changed, 8 insertions(+) diff --git a/drivers/common/mlx5/mlx5_devx_cmds.c b/drivers/common/mlx5/mlx5_devx_cmds.c index 8f53303fa7..17378e1753 100644 --- a/drivers/common/mlx5/mlx5_devx_cmds.c +++ b/drivers/common/mlx5/mlx5_devx_cmds.c @@ -2129,6 +2129,11 @@ mlx5_devx_cmd_modify_sq(struct mlx5_devx_obj *sq, MLX5_SET(sqc, sq_ctx, state, sq_attr->state); MLX5_SET(sqc, sq_ctx, hairpin_peer_rq, sq_attr->hairpin_peer_rq); MLX5_SET(sqc, sq_ctx, hairpin_peer_vhca, sq_attr->hairpin_peer_vhca); + if (sq_attr->rl_update) { + MLX5_SET64(modify_sq_in, in, modify_bitmask, 1); + MLX5_SET(sqc, sq_ctx, packet_pacing_rate_limit_index, + sq_attr->packet_pacing_rate_limit_index); + } ret = mlx5_glue->devx_obj_modify(sq->obj, in, sizeof(in), out, sizeof(out)); if (ret) { diff --git a/drivers/common/mlx5/mlx5_devx_cmds.h b/drivers/common/mlx5/mlx5_devx_cmds.h index 930ae2c072..82d949972b 100644 --- a/drivers/common/mlx5/mlx5_devx_cmds.h +++ b/drivers/common/mlx5/mlx5_devx_cmds.h @@ -519,6 +519,9 @@ struct mlx5_devx_modify_sq_attr { uint32_t state:4; uint32_t hairpin_peer_rq:24; uint32_t hairpin_peer_vhca:16; + uint32_t rl_update:1; + /* Set to update packet_pacing_rate_limit_index on a live SQ. */ + uint32_t packet_pacing_rate_limit_index:16; }; -- 2.43.0
