> -----Original Message----- > From: Wang, Zhihong > Sent: Wednesday, June 01, 2016 4:28 AM > To: dev at dpdk.org > Cc: Ananyev, Konstantin; Richardson, Bruce; De Lara Guarch, Pablo; > thomas.monjalon at 6wind.com; Wang, Zhihong > Subject: [PATCH v2 3/5] testpmd: show throughput in port stats > > This patch adds throughput numbers (in the period since last use of this > command) in port statistics display for "show port stats (port_id|all)". > > > Signed-off-by: Zhihong Wang <zhihong.wang at intel.com> > --- > app/test-pmd/config.c | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c > index c611649..f487b87 100644 > --- a/app/test-pmd/config.c > +++ b/app/test-pmd/config.c > @@ -92,6 +92,7 @@ > #include <rte_ether.h> > #include <rte_ethdev.h> > #include <rte_string_fns.h> > +#include <rte_cycles.h> > > #include "testpmd.h" > > @@ -150,6 +151,10 @@ print_ethaddr(const char *name, struct ether_addr > *eth_addr) > void > nic_stats_display(portid_t port_id) > { > + static uint64_t sum_rx[RTE_MAX_ETHPORTS]; > + static uint64_t sum_tx[RTE_MAX_ETHPORTS]; > + static uint64_t cycles[RTE_MAX_ETHPORTS]; > + uint64_t pkt_rx, pkt_tx, cycle;
Could you rename some of these variables to something more specific? Like: pkt_rx -> diff_rx_pkts sum_rx -> prev_rx_pkts cycle -> diff_cycles cycles -> prev_cycles > struct rte_eth_stats stats; > struct rte_port *port = &ports[port_id]; > uint8_t i; > @@ -209,6 +214,21 @@ nic_stats_display(portid_t port_id) > } > } > > + cycle = cycles[port_id]; > + cycles[port_id] = rte_rdtsc(); > + if (cycle > 0) > + cycle = cycles[port_id] - cycle; > + > + pkt_rx = stats.ipackets - sum_rx[port_id]; > + pkt_tx = stats.opackets - sum_tx[port_id]; > + sum_rx[port_id] = stats.ipackets; > + sum_tx[port_id] = stats.opackets; > + printf("\n Throughput (since last show)\n"); > + printf(" RX-pps: %12"PRIu64"\n" > + " TX-pps: %12"PRIu64"\n", > + cycle > 0 ? pkt_rx * rte_get_tsc_hz() / cycle : 0, > + cycle > 0 ? pkt_tx * rte_get_tsc_hz() / cycle : 0); > + > printf(" %s############################%s\n", > nic_stats_border, nic_stats_border); > } > -- > 2.5.0