Thank you Patrick. Please do send a notification email once this is reverted in the release/1.7.0 branch. Thank you Jinmei for putting the fix for GEODE-5727 into release/1.7.0. However the GEODE ticket is still in open state. Can it be closed?
Regards Nabarun Nag On Thu, Sep 13, 2018 at 9:21 AM Patrick Rhomberg <prhomb...@pivotal.io> wrote: > Sounds like we have a plan! I'll take it upon myself to do the revert. > > On Thu, Sep 13, 2018 at 7:24 AM, Sai Boorlagadda < > sai.boorlaga...@gmail.com> > wrote: > > > +1 to revert and fix on develop > > > > On Wed, Sep 12, 2018, 4:43 PM Nabarun Nag <n...@apache.org> wrote: > > > > > Reverting them on release/1.7.0 will bring it to the previous status > quo, > > > how all previous releases were done. I don't think anyone will build > > > release/1.7.0 repeatedly, hence there is no advantage of making build > > > process faster for that branch. > > > Whereas on develop a more appropriate solution can be incorporated > after > > > discussions. > > > > > > Is it acceptable? > > > > > > Regards > > > Nabarun Nag > > > > > > On Wed, Sep 12, 2018 at 4:37 PM Patrick Rhomberg <prhomb...@pivotal.io > > > > > wrote: > > > > > > > Okay. So that information is definitely coming from the > > > > GemFireVersion.properties file, which explains this issue. Either > > > > reverting the previous GEODE-5600 changes or resolving merge > conflicts > > > from > > > > PR 2457 would address this issue. > > > > > > > > My concern remains about the .buildinfo file, however. Is the > > > .buildinfo > > > > redundant at this point and should be? Should it always contain the > > > > necessary information, with the GemFireVersion.properties file > > acquiring > > > > the source information from .buildinfo rather than fetching it again > > > > itself? Is .buildinfo a convention in distributions with which I am > > just > > > > myself unfamiliar? > > > > > > > > The path we take here is fundamentally linked to how we want to > > approach > > > > GEODE-5600, and with PR 2457 currently open, we could choose any of > > these > > > > routes to go. > > > > > > > > On Wed, Sep 12, 2018 at 4:13 PM, Nabarun Nag <n...@apache.org> > wrote: > > > > > > > > > @patrick > > > > > if you build geode release branch 1.7.0 "./gradlew clean build > > > > > -Dskip.tests=true -xdocs -xjavadoc" and start gfsh from > > > > > geode-assembly/build/install/apache-geode/bin/gfsh > > > > > And then type `version --full` you get this > > > > > > > > > > gfsh>version --full > > > > > Build-Date: 2018-09-12 16:07:03 -0700 > > > > > Build-Id: nnag 0 > > > > > Build-Java-Version: 1.8.0_181 > > > > > Build-Platform: Mac OS X 10.13.6 x86_64 > > > > > Product-Name: Apache Geode > > > > > Product-Version: 1.7.0 > > > > > Source-Date: 2018-09-12 16:07:03 -0700 > > > > > *Source-Repository: unknown* > > > > > *Source-Revision: unknown* > > > > > Native version: native code unavailable > > > > > Running on: /10.118.19.23, 8 cpu(s), x86_64 Mac OS X 10.13.6 > > > > > > > > > > As you can notice that Source-Repository and Source-Revision is > > > missing. > > > > It > > > > > should contain the info from the buildinfo file present in > > > > > geode-assemble/.buildinfo file. It contains the following > > > > > > > > > > # > > > > > #Wed Sep 12 16:07:56 PDT 2018 > > > > > Source-Date=2018-09-11 15\:56\:48 -0700 > > > > > Source-Revision=c637193aa61abdfd236ae36b6d9a228fc1e84bcd > > > > > Source-Repository=release/1.7.0 > > > > > > > > > > Hope this helps > > > > > > > > > > Regards > > > > > Nabarun Nag > > > > > > > > > > On Wed, Sep 12, 2018 at 3:51 PM Patrick Rhomberg < > > prhomb...@pivotal.io > > > > > > > > > wrote: > > > > > > > > > > > I'm happy to work on those reverts, although if Anthony could > > > elaborate > > > > > on > > > > > > where exactly the version information was missing, that assuage > > some > > > of > > > > > my > > > > > > own worries as to whether it's the right approach. It's still > not > > > > clear > > > > > to > > > > > > me where .buildinfo is intended to be consumed. > > > > > > > > > > > > On Wed, Sep 12, 2018 at 3:08 PM, Nabarun Nag <n...@apache.org> > > > wrote: > > > > > > > > > > > > > Yes Alexander, we are still waiting on the build info reverts > > from > > > > > > Patrick, > > > > > > > so, I think that this can be put into release/1.7.0. > > > > > > > > > > > > > > Sure Jinmei, you can go ahead and merge the change into > > > release/1.7.0 > > > > > > > branch too when you merge the PR. Please do close the fixed > > version > > > > in > > > > > > the > > > > > > > JIRA as 1.7.0 > > > > > > > > > > > > > > Regards > > > > > > > Nabarun Nag > > > > > > > > > > > > > > > > > > > > > On Wed, Sep 12, 2018 at 2:50 PM Alexander Murmann < > > > > amurm...@pivotal.io > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > While there is a workaround this looks like a highly visible > > bug > > > > > with a > > > > > > > > fairly safe fix. I am in favor of merging, since the branch > is > > > > still > > > > > > > > distressed anyways. > > > > > > > > > > > > > > > > Other opinions? > > > > > > > > > > > > > > > > On Wed, Sep 12, 2018 at 2:29 PM, Jinmei Liao < > > jil...@pivotal.io> > > > > > > wrote: > > > > > > > > > > > > > > > > > Should we include the fix for GEODE-5727 in the 1.7 release > > as > > > > > well? > > > > > > > > > > > > > > > > > > Without the fix, the command "export cluster-config > > > > > > > > --zip-file-name=x.zip" > > > > > > > > > would fail with NPE, user has to use "export cluster-config > > > > > > > > > --zip-file-name=./x.zip" in order for export to work. > > > > > > > > > > > > > > > > > > PR for this fix is ready and could be merged soon. > > > > > > > > > > > > > > > > > > Jinmei > > > > > > > > > > > > > > > > > > > > > > > > > > > On Wed, Sep 12, 2018 at 11:12 AM Patrick Rhomberg < > > > > > > > prhomb...@apache.org> > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > I'm not sure PR 2457 will help with an ignored > .buildinfo, > > > but > > > > > I'm > > > > > > > not > > > > > > > > > sure > > > > > > > > > > as to why .buildinfo would be getting ignored by > anything, > > > > > either. > > > > > > > > > > > > > > > > > > > > PR 2457 deals with the still-needs-to-be-renamed > > > > > > > > > GemFireVersion.properties > > > > > > > > > > file and when it is generated. Previously, it was > whenever > > > the > > > > > git > > > > > > > > index > > > > > > > > > > changed, which was too frequent. Not it is whenever the > > > source > > > > > > > > > parameters > > > > > > > > > > are passed on the command-line with the build, which has > > > > > presented > > > > > > > > issues > > > > > > > > > > outside the Concourse pipeline. PR 2457 splits the > > > difference, > > > > > > > > > > regenerating the file anytime the SHA changes. > > > > > > > > > > > > > > > > > > > > The only interaction with .buildinfo that I can see is > that > > > if > > > > > the > > > > > > > > build > > > > > > > > > > was run on a machine that was missing git, it would > attempt > > > to > > > > > read > > > > > > > > > values > > > > > > > > > > instead from .buildinfo when creating the > > > > > GemFireVersion.properties > > > > > > > > file. > > > > > > > > > > > > > > > > > > > > I guess I don't fully understand the problem Anthony has > > > called > > > > > > out. > > > > > > > > > Where > > > > > > > > > > is it exactly that information previously gathered from > > > > > .buildinfo > > > > > > is > > > > > > > > now > > > > > > > > > > missing? And are we certain that it was indeed pulling > > from > > > > > > > .buildinfo > > > > > > > > > and > > > > > > > > > > not the aforementioned GemFireVersion.properties? > > > > > > > > > > > > > > > > > > > > On Wed, Sep 12, 2018 at 10:11 AM, Alexander Murmann < > > > > > > > > amurm...@pivotal.io > > > > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > Hi everyone, > > > > > > > > > > > > > > > > > > > > > > It seems like that PR doesn't address the missing SHA > > issue > > > > > > either > > > > > > > > and > > > > > > > > > I > > > > > > > > > > am > > > > > > > > > > > not aware of any proposals to properly fix this. How > > viable > > > > is > > > > > it > > > > > > > to > > > > > > > > > > revert > > > > > > > > > > > the relevant Gradle build changes on support/1.7? > > > > > > > > > > > We could continue make the new Gradle approach work > with > > > our > > > > > > > release > > > > > > > > > > > process on develop and hopefully release 1.8 with these > > > > > changes. > > > > > > > > > > > > > > > > > > > > > > Are there any other proposals to unblock this? > > > > > > > > > > > > > > > > > > > > > > On Tue, Sep 11, 2018 at 5:41 PM, Anthony Baker < > > > > > > aba...@pivotal.io> > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > Slight clarification—the issue I mentioned is when a > > user > > > > > > builds > > > > > > > > > Geode > > > > > > > > > > > > from the source distribution. The source > distribution > > > that > > > > > the > > > > > > > > > release > > > > > > > > > > > > manager creates has the correct .buildinfo file, it’s > > > just > > > > > > > ignored > > > > > > > > by > > > > > > > > > > the > > > > > > > > > > > > build. In short, the release manager can’t work > around > > > the > > > > > > > > problem. > > > > > > > > > > > > > > > > > > > > > > > > Does [1] help with this? > > > > > > > > > > > > > > > > > > > > > > > > Anthony > > > > > > > > > > > > > > > > > > > > > > > > [1] https://github.com/apache/geode/pull/2457 < > > > > > > > > > > > https://github.com/apache/ > > > > > > > > > > > > geode/pull/2457> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Sep 11, 2018, at 3:16 PM, Alexander Murmann < > > > > > > > > > amurm...@pivotal.io> > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > What's the consensus on the version info issue > > Anthony > > > is > > > > > > > calling > > > > > > > > > > out? > > > > > > > > > > > > Does > > > > > > > > > > > > > anyone have a proposal for fixing this for this > > > release? > > > > > > Should > > > > > > > > > > Nabarun > > > > > > > > > > > > as > > > > > > > > > > > > > the release manager manually correct this for the > > > release > > > > > and > > > > > > > we > > > > > > > > > > find a > > > > > > > > > > > > > permanent solution for 1.8? > > > > > > > > > > > > > > > > > > > > > > > > > > On Mon, Sep 10, 2018 at 12:33 PM, Anthony Baker < > > > > > > > > aba...@pivotal.io > > > > > > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > >> Unfortunately it would require a fix to the > > build—it’s > > > > not > > > > > > > about > > > > > > > > > > > > producing > > > > > > > > > > > > >> the release candidate. It’s when a user builds > from > > > the > > > > > > source > > > > > > > > > > release > > > > > > > > > > > > that > > > > > > > > > > > > >> the version info is ignored. > > > > > > > > > > > > >> > > > > > > > > > > > > >> Anthony > > > > > > > > > > > > >> > > > > > > > > > > > > >>> On Sep 10, 2018, at 10:02 AM, Nabarun Nag < > > > > > n...@apache.org > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > >>> > > > > > > > > > > > > >>> Hello Anthony, > > > > > > > > > > > > >>> > > > > > > > > > > > > >>> I plan to do that while creating the release > > > candidate. > > > > > If > > > > > > > > there > > > > > > > > > > are > > > > > > > > > > > no > > > > > > > > > > > > >>> concerns raised on the release branch, I will > start > > > > with > > > > > > the > > > > > > > > > > process > > > > > > > > > > > > >> soon. > > > > > > > > > > > > >>> > > > > > > > > > > > > >>> Regards > > > > > > > > > > > > >>> Nabarun Nag > > > > > > > > > > > > >>> > > > > > > > > > > > > >>>> On Mon, Sep 10, 2018 at 8:51 AM Anthony Baker < > > > > > > > > > aba...@pivotal.io> > > > > > > > > > > > > >> wrote: > > > > > > > > > > > > >>>> > > > > > > > > > > > > >>>> Looks good Naba! Only thing I see right now is > > that > > > > > > > building > > > > > > > > > from > > > > > > > > > > > the > > > > > > > > > > > > >>>> source distribution does not use the .buildinfo > > > file, > > > > > > > leaving > > > > > > > > > the > > > > > > > > > > > > >> version > > > > > > > > > > > > >>>> string empty. > > > > > > > > > > > > >>>> > > > > > > > > > > > > >>>> Anthony > > > > > > > > > > > > >>>> > > > > > > > > > > > > >>>> > > > > > > > > > > > > >>>>> On Sep 7, 2018, at 9:15 AM, Nabarun Nag < > > > > > n...@apache.org > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > >>>>> > > > > > > > > > > > > >>>>> CORRECTION: if '*no*' concerns are raised, we > > will > > > > > start > > > > > > > with > > > > > > > > > the > > > > > > > > > > > > >> voting > > > > > > > > > > > > >>>>> for the release candidate soon. > > > > > > > > > > > > >>>>> > > > > > > > > > > > > >>>>> Regrads > > > > > > > > > > > > >>>>> Nabarun Nag > > > > > > > > > > > > >>>>> > > > > > > > > > > > > >>>>>> On Fri, Sep 7, 2018 at 9:08 AM Nabarun Nag < > > > > > > > n...@pivotal.io > > > > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > >>>>>> > > > > > > > > > > > > >>>>>> Hello Geode Dev Community, > > > > > > > > > > > > >>>>>> > > > > > > > > > > > > >>>>>> We have created a new release branch for > Apache > > > > Geode > > > > > > > 1.7.0 > > > > > > > > - > > > > > > > > > > > > >>>>>> "release/1.7.0" > > > > > > > > > > > > >>>>>> > > > > > > > > > > > > >>>>>> Previous branch was deleted and has been > > replaced > > > > > with a > > > > > > > > fresh > > > > > > > > > > > one. > > > > > > > > > > > > >>>>>> > > > > > > > > > > > > >>>>>> Please do review and raise any concern with > the > > > > > release > > > > > > > > > branch. > > > > > > > > > > > > >>>>>> > > > > > > > > > > > > >>>>>> If concerns are raised, we will start with the > > > > voting > > > > > > for > > > > > > > > the > > > > > > > > > > > > release > > > > > > > > > > > > >>>>>> candidate soon. > > > > > > > > > > > > >>>>>> > > > > > > > > > > > > >>>>>> Regards > > > > > > > > > > > > >>>>>> Nabarun Nag > > > > > > > > > > > > >>>>>> > > > > > > > > > > > > >>>> > > > > > > > > > > > > >>>> -- > > > > > > > > > > > > >>> Regards > > > > > > > > > > > > >>> Nabarun Nag > > > > > > > > > > > > >> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > Cheers > > > > > > > > > > > > > > > > > > Jinmei > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > Regards > > > > > > > Nabarun Nag > > > > > > > > > > > > > > > > > > -- > > > > > Regards > > > > > Nabarun Nag > > > > > > > > > > > > -- > > > Regards > > > Nabarun Nag > > > > > >
