I'm reposting the attached patch, which adds various <IfModule> sections
to the default httpd.conf to allow proper function without changes to
httpd.conf if various modules aren't enabled. Sent this about a month ago
without any response. Patch is from docs/conf/httpd-std.conf.in from the
2.0.39 release.
--
Tim Wilde
[EMAIL PROTECTED]
Systems Administrator
Dynamic DNS Network Services
http://www.dyndns.org/
--- httpd-std.conf.in.orig Sat Jun 15 03:20:59 2002
+++ httpd-std.conf.in Wed Jun 19 14:36:06 2002
@@ -363,7 +363,9 @@
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
#
-UserDir public_html
+<IfModule mod_userdir.c>
+ UserDir public_html
+</IfModule>
#
# Control access to UserDir directories. The following is an example
@@ -390,7 +392,9 @@
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
#
-DirectoryIndex index.html index.html.var
+<IfModule mod_dir.c>
+ DirectoryIndex index.html index.html.var
+</IfModule>
#
# AccessFileName: The name of the file to look for in each directory
@@ -408,11 +412,14 @@
Deny from all
</Files>
-#
-# TypesConfig describes where the mime.types file (or equivalent) is
-# to be found.
-#
-TypesConfig @rel_sysconfdir@/mime.types
+<IfModule mod_mime.c>
+ #
+ # TypesConfig describes where the mime.types file (or equivalent) is
+ # to be found.
+ #
+ TypesConfig @rel_sysconfdir@/mime.types
+
+</IfModule>
#
# DefaultType is the default MIME type the server will use for a document
@@ -510,52 +517,55 @@
#
ServerSignature On
-#
-# Aliases: Add here as many aliases as you need (with no limit). The format is
-# Alias fakename realname
-#
-# Note that if you include a trailing / on fakename then the server will
-# require it to be present in the URL. So "/icons" isn't aliased in this
-# example, only "/icons/". If the fakename is slash-terminated, then the
-# realname must also be slash terminated, and if the fakename omits the
-# trailing slash, the realname must also omit it.
-#
-# We include the /icons/ alias for FancyIndexed directory listings. If you
-# do not use FancyIndexing, you may comment this out.
-#
-Alias /icons/ "@exp_iconsdir@/"
+<IfModule mod_alias.c>
+ #
+ # Aliases: Add here as many aliases as you need (with no limit). The format is
+ # Alias fakename realname
+ #
+ # Note that if you include a trailing / on fakename then the server will
+ # require it to be present in the URL. So "/icons" isn't aliased in this
+ # example, only "/icons/". If the fakename is slash-terminated, then the
+ # realname must also be slash terminated, and if the fakename omits the
+ # trailing slash, the realname must also omit it.
+ #
+ # We include the /icons/ alias for FancyIndexed directory listings. If
+ # you do not use FancyIndexing, you may comment this out.
+ #
+ Alias /icons/ "@exp_iconsdir@/"
-<Directory "@exp_iconsdir@">
- Options Indexes MultiViews
- AllowOverride None
- Order allow,deny
- Allow from all
-</Directory>
+ <Directory "@exp_iconsdir@">
+ Options Indexes MultiViews
+ AllowOverride None
+ Order allow,deny
+ Allow from all
+ </Directory>
-#
-# This should be changed to the ServerRoot/manual/. The alias provides
-# the manual, even if you choose to move your DocumentRoot. You may comment
-# this out if you do not care for the documentation.
-#
-Alias /manual "@exp_manualdir@"
-
-<Directory "@exp_manualdir@">
- Options Indexes FollowSymLinks MultiViews IncludesNoExec
- AddOutputFilter Includes html
- AllowOverride None
- Order allow,deny
- Allow from all
-</Directory>
+ #
+ # This should be changed to the ServerRoot/manual/. The alias provides
+ # the manual, even if you choose to move your DocumentRoot. You may
+ # comment this out if you do not care for the documentation.
+ #
+ Alias /manual "@exp_manualdir@"
-#
-# ScriptAlias: This controls which directories contain server scripts.
-# ScriptAliases are essentially the same as Aliases, except that
-# documents in the realname directory are treated as applications and
-# run by the server when requested rather than as documents sent to the client.
-# The same rules about trailing "/" apply to ScriptAlias directives as to
-# Alias.
-#
-ScriptAlias /cgi-bin/ "@exp_cgidir@/"
+ <Directory "@exp_manualdir@">
+ Options Indexes FollowSymLinks MultiViews IncludesNoExec
+ AddOutputFilter Includes html
+ AllowOverride None
+ Order allow,deny
+ Allow from all
+ </Directory>
+
+ #
+ # ScriptAlias: This controls which directories contain server scripts.
+ # ScriptAliases are essentially the same as Aliases, except that
+ # documents in the realname directory are treated as applications and
+ # run by the server when requested rather than as documents sent to the
+ # client. The same rules about trailing "/" apply to ScriptAlias
+ # directives as to Alias.
+ #
+ ScriptAlias /cgi-bin/ "@exp_cgidir@/"
+
+</IfModule>
<IfModule mod_cgid.c>
#
@@ -586,166 +596,174 @@
#
# Directives controlling the display of server-generated directory listings.
#
+<IfModule mod_autoindex.c>
-#
-# IndexOptions: Controls the appearance of server-generated directory
-# listings.
-#
-IndexOptions FancyIndexing VersionSort
+ #
+ # IndexOptions: Controls the appearance of server-generated directory
+ # listings.
+ #
+ IndexOptions FancyIndexing VersionSort
+
+ #
+ # AddIcon* directives tell the server which icon to show for different
+ # files or filename extensions. These are only displayed for
+ # FancyIndexed directories.
+ #
+ AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
+
+ AddIconByType (TXT,/icons/text.gif) text/*
+ AddIconByType (IMG,/icons/image2.gif) image/*
+ AddIconByType (SND,/icons/sound2.gif) audio/*
+ AddIconByType (VID,/icons/movie.gif) video/*
+
+ AddIcon /icons/binary.gif .bin .exe
+ AddIcon /icons/binhex.gif .hqx
+ AddIcon /icons/tar.gif .tar
+ AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
+ AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
+ AddIcon /icons/a.gif .ps .ai .eps
+ AddIcon /icons/layout.gif .html .shtml .htm .pdf
+ AddIcon /icons/text.gif .txt
+ AddIcon /icons/c.gif .c
+ AddIcon /icons/p.gif .pl .py
+ AddIcon /icons/f.gif .for
+ AddIcon /icons/dvi.gif .dvi
+ AddIcon /icons/uuencoded.gif .uu
+ AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
+ AddIcon /icons/tex.gif .tex
+ AddIcon /icons/bomb.gif core
+
+ AddIcon /icons/back.gif ..
+ AddIcon /icons/hand.right.gif README
+ AddIcon /icons/folder.gif ^^DIRECTORY^^
+ AddIcon /icons/blank.gif ^^BLANKICON^^
+
+ #
+ # DefaultIcon is which icon to show for files which do not have an icon
+ # explicitly set.
+ #
+ DefaultIcon /icons/unknown.gif
+
+ #
+ # AddDescription allows you to place a short description after a file in
+ # server-generated indexes. These are only displayed for FancyIndexed
+ # directories.
+ # Format: AddDescription "description" filename
+ #
+ #AddDescription "GZIP compressed document" .gz
+ #AddDescription "tar archive" .tar
+ #AddDescription "GZIP compressed tar archive" .tgz
+
+ #
+ # ReadmeName is the name of the README file the server will look for by
+ # default, and append to directory listings.
+ #
+ # HeaderName is the name of a file which should be prepended to
+ # directory indexes.
+ ReadmeName README.html
+ HeaderName HEADER.html
+
+ #
+ # IndexIgnore is a set of filenames which directory indexing should ignore
+ # and not include in the listing. Shell-style wildcarding is permitted.
+ #
+ IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
+</IfModule>
-#
-# AddIcon* directives tell the server which icon to show for different
-# files or filename extensions. These are only displayed for
-# FancyIndexed directories.
-#
-AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
-
-AddIconByType (TXT,/icons/text.gif) text/*
-AddIconByType (IMG,/icons/image2.gif) image/*
-AddIconByType (SND,/icons/sound2.gif) audio/*
-AddIconByType (VID,/icons/movie.gif) video/*
-
-AddIcon /icons/binary.gif .bin .exe
-AddIcon /icons/binhex.gif .hqx
-AddIcon /icons/tar.gif .tar
-AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
-AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
-AddIcon /icons/a.gif .ps .ai .eps
-AddIcon /icons/layout.gif .html .shtml .htm .pdf
-AddIcon /icons/text.gif .txt
-AddIcon /icons/c.gif .c
-AddIcon /icons/p.gif .pl .py
-AddIcon /icons/f.gif .for
-AddIcon /icons/dvi.gif .dvi
-AddIcon /icons/uuencoded.gif .uu
-AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
-AddIcon /icons/tex.gif .tex
-AddIcon /icons/bomb.gif core
-
-AddIcon /icons/back.gif ..
-AddIcon /icons/hand.right.gif README
-AddIcon /icons/folder.gif ^^DIRECTORY^^
-AddIcon /icons/blank.gif ^^BLANKICON^^
-
-#
-# DefaultIcon is which icon to show for files which do not have an icon
-# explicitly set.
-#
-DefaultIcon /icons/unknown.gif
-
-#
-# AddDescription allows you to place a short description after a file in
-# server-generated indexes. These are only displayed for FancyIndexed
-# directories.
-# Format: AddDescription "description" filename
-#
-#AddDescription "GZIP compressed document" .gz
-#AddDescription "tar archive" .tar
-#AddDescription "GZIP compressed tar archive" .tgz
-
-#
-# ReadmeName is the name of the README file the server will look for by
-# default, and append to directory listings.
-#
-# HeaderName is the name of a file which should be prepended to
-# directory indexes.
-ReadmeName README.html
-HeaderName HEADER.html
-
-#
-# IndexIgnore is a set of filenames which directory indexing should ignore
-# and not include in the listing. Shell-style wildcarding is permitted.
-#
-IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
-
-#
-# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
-# information on the fly. Note: Not all browsers support this.
-# Despite the name similarity, the following Add* directives have nothing
-# to do with the FancyIndexing customization directives above.
-#
-AddEncoding x-compress Z
-AddEncoding x-gzip gz tgz
-
-#
-# DefaultLanguage and AddLanguage allows you to specify the language of
-# a document. You can then use content negotiation to give a browser a
-# file in a language the user can understand.
-#
-# Specify a default language. This means that all data
-# going out without a specific language tag (see below) will
-# be marked with this one. You probably do NOT want to set
-# this unless you are sure it is correct for all cases.
-#
-# * It is generally better to not mark a page as
-# * being a certain language than marking it with the wrong
-# * language!
-#
-# DefaultLanguage nl
-#
-# Note 1: The suffix does not have to be the same as the language
-# keyword --- those with documents in Polish (whose net-standard
-# language code is pl) may wish to use "AddLanguage pl .po" to
-# avoid the ambiguity with the common suffix for perl scripts.
-#
-# Note 2: The example entries below illustrate that in some cases
-# the two character 'Language' abbreviation is not identical to
-# the two character 'Country' code for its country,
-# E.g. 'Danmark/dk' versus 'Danish/da'.
-#
-# Note 3: In the case of 'ltz' we violate the RFC by using a three char
-# specifier. There is 'work in progress' to fix this and get
-# the reference data for rfc1766 cleaned up.
-#
-# Danish (da) - Dutch (nl) - English (en) - Estonian (et)
-# French (fr) - German (de) - Greek-Modern (el)
-# Italian (it) - Norwegian (no) - Norwegian Nynorsk (nn) - Korean (ko)
-# Portugese (pt) - Luxembourgeois* (ltz)
-# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
-# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
-# Russian (ru) - Croatian (hr)
-#
-AddLanguage da .dk
-AddLanguage nl .nl
-AddLanguage en .en
-AddLanguage et .et
-AddLanguage fr .fr
-AddLanguage de .de
-AddLanguage he .he
-AddLanguage el .el
-AddLanguage it .it
-AddLanguage ja .ja
-AddLanguage pl .po
-AddLanguage ko .ko
-AddLanguage pt .pt
-AddLanguage nn .nn
-AddLanguage no .no
-AddLanguage pt-br .pt-br
-AddLanguage ltz .ltz
-AddLanguage ca .ca
-AddLanguage es .es
-AddLanguage sv .se
-AddLanguage cz .cz
-AddLanguage ru .ru
-AddLanguage tw .tw
-AddLanguage zh-tw .tw
-AddLanguage hr .hr
-
-#
-# LanguagePriority allows you to give precedence to some languages
-# in case of a tie during content negotiation.
-#
-# Just list the languages in decreasing order of preference. We have
-# more or less alphabetized them here. You probably want to change this.
-#
-LanguagePriority en da nl et fr de el it ja ko no pl pt pt-br ltz ca es sv tw
-
-#
-# ForceLanguagePriority allows you to serve a result page rather than
-# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
-# [in case no accepted languages matched the available variants]
-#
-ForceLanguagePriority Prefer Fallback
+<IfModule mod_mime.c>
+ #
+ # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+)
+ # uncompress information on the fly. Note: Not all browsers support
+ # this. Despite the name similarity, the following Add* directives have
+ # nothing to do with the FancyIndexing customization directives above.
+ #
+ AddEncoding x-compress Z
+ AddEncoding x-gzip gz tgz
+
+ #
+ # DefaultLanguage and AddLanguage allows you to specify the language of
+ # a document. You can then use content negotiation to give a browser a
+ # file in a language the user can understand.
+ #
+ # Specify a default language. This means that all data
+ # going out without a specific language tag (see below) will
+ # be marked with this one. You probably do NOT want to set
+ # this unless you are sure it is correct for all cases.
+ #
+ # * It is generally better to not mark a page as
+ # * being a certain language than marking it with the wrong
+ # * language!
+ #
+ # DefaultLanguage nl
+ #
+ # Note 1: The suffix does not have to be the same as the language
+ # keyword --- those with documents in Polish (whose net-standard
+ # language code is pl) may wish to use "AddLanguage pl .po" to
+ # avoid the ambiguity with the common suffix for perl scripts.
+ #
+ # Note 2: The example entries below illustrate that in some cases
+ # the two character 'Language' abbreviation is not identical to
+ # the two character 'Country' code for its country,
+ # E.g. 'Danmark/dk' versus 'Danish/da'.
+ #
+ # Note 3: In the case of 'ltz' we violate the RFC by using a three char
+ # specifier. There is 'work in progress' to fix this and get
+ # the reference data for rfc1766 cleaned up.
+ #
+ # Danish (da) - Dutch (nl) - English (en) - Estonian (et)
+ # French (fr) - German (de) - Greek-Modern (el)
+ # Italian (it) - Norwegian (no) - Norwegian Nynorsk (nn) - Korean (ko)
+ # Portugese (pt) - Luxembourgeois* (ltz)
+ # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
+ # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
+ # Russian (ru) - Croatian (hr)
+ #
+ AddLanguage da .dk
+ AddLanguage nl .nl
+ AddLanguage en .en
+ AddLanguage et .et
+ AddLanguage fr .fr
+ AddLanguage de .de
+ AddLanguage he .he
+ AddLanguage el .el
+ AddLanguage it .it
+ AddLanguage ja .ja
+ AddLanguage pl .po
+ AddLanguage ko .ko
+ AddLanguage pt .pt
+ AddLanguage nn .nn
+ AddLanguage no .no
+ AddLanguage pt-br .pt-br
+ AddLanguage ltz .ltz
+ AddLanguage ca .ca
+ AddLanguage es .es
+ AddLanguage sv .se
+ AddLanguage cz .cz
+ AddLanguage ru .ru
+ AddLanguage tw .tw
+ AddLanguage zh-tw .tw
+ AddLanguage hr .hr
+
+</IfModule>
+
+<IfModule mod_negotiation.c>
+ #
+ # LanguagePriority allows you to give precedence to some languages
+ # in case of a tie during content negotiation.
+ #
+ # Just list the languages in decreasing order of preference. We have
+ # more or less alphabetized them here. You probably want to change this.
+ #
+ LanguagePriority en da nl et fr de el it ja ko no pl pt pt-br ltz ca es sv tw
+
+ #
+ # ForceLanguagePriority allows you to serve a result page rather than
+ # MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
+ # [in case no accepted languages matched the available variants]
+ #
+ ForceLanguagePriority Prefer Fallback
+
+</IfModule>
#
# Specify a default charset for all pages sent out. This is
@@ -759,92 +777,95 @@
#
AddDefaultCharset ISO-8859-1
-#
-# Commonly used filename extensions to character sets. You probably
-# want to avoid clashes with the language extensions, unless you
-# are good at carefully testing your setup after each change.
-# See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets for
-# the official list of charset names and their respective RFCs
-#
-AddCharset ISO-8859-1 .iso8859-1 .latin1
-AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
-AddCharset ISO-8859-3 .iso8859-3 .latin3
-AddCharset ISO-8859-4 .iso8859-4 .latin4
-AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru
-AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb
-AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk
-AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb
-AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk
-AddCharset ISO-2022-JP .iso2022-jp .jis
-AddCharset ISO-2022-KR .iso2022-kr .kis
-AddCharset ISO-2022-CN .iso2022-cn .cis
-AddCharset Big5 .Big5 .big5
-# For russian, more than one charset is used (depends on client, mostly):
-AddCharset WINDOWS-1251 .cp-1251 .win-1251
-AddCharset CP866 .cp866
-AddCharset KOI8-r .koi8-r .koi8-ru
-AddCharset KOI8-ru .koi8-uk .ua
-AddCharset ISO-10646-UCS-2 .ucs2
-AddCharset ISO-10646-UCS-4 .ucs4
-AddCharset UTF-8 .utf8
-
-# The set below does not map to a specific (iso) standard
-# but works on a fairly wide range of browsers. Note that
-# capitalization actually matters (it should not, but it
-# does for some browsers).
-#
-# See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets
-# for a list of sorts. But browsers support few.
-#
-AddCharset GB2312 .gb2312 .gb
-AddCharset utf-7 .utf7
-AddCharset utf-8 .utf8
-AddCharset big5 .big5 .b5
-AddCharset EUC-TW .euc-tw
-AddCharset EUC-JP .euc-jp
-AddCharset EUC-KR .euc-kr
-AddCharset shift_jis .sjis
-
-#
-# AddType allows you to add to or override the MIME configuration
-# file mime.types for specific file types.
-#
-AddType application/x-tar .tgz
-
-#
-# AddHandler allows you to map certain file extensions to "handlers":
-# actions unrelated to filetype. These can be either built into the server
-# or added with the Action directive (see below)
-#
-# To use CGI scripts outside of ScriptAliased directories:
-# (You will also need to add "ExecCGI" to the "Options" directive.)
-#
-#AddHandler cgi-script .cgi
-
-#
-# For files that include their own HTTP headers:
-#
-#AddHandler send-as-is asis
-
-#
-# For server-parsed imagemap files:
-#
-#AddHandler imap-file map
-
-#
-# For type maps (negotiated resources):
-# (This is enabled by default to allow the Apache "It Worked" page
-# to be distributed in multiple languages.)
-#
-AddHandler type-map var
+<IfModule mod_mime.c>
+ #
+ # Commonly used filename extensions to character sets. You probably
+ # want to avoid clashes with the language extensions, unless you
+ # are good at carefully testing your setup after each change.
+ # See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets for
+ # the official list of charset names and their respective RFCs
+ #
+ AddCharset ISO-8859-1 .iso8859-1 .latin1
+ AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
+ AddCharset ISO-8859-3 .iso8859-3 .latin3
+ AddCharset ISO-8859-4 .iso8859-4 .latin4
+ AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru
+ AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb
+ AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk
+ AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb
+ AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk
+ AddCharset ISO-2022-JP .iso2022-jp .jis
+ AddCharset ISO-2022-KR .iso2022-kr .kis
+ AddCharset ISO-2022-CN .iso2022-cn .cis
+ AddCharset Big5 .Big5 .big5
+ # For russian, more than one charset is used (depends on client, mostly):
+ AddCharset WINDOWS-1251 .cp-1251 .win-1251
+ AddCharset CP866 .cp866
+ AddCharset KOI8-r .koi8-r .koi8-ru
+ AddCharset KOI8-ru .koi8-uk .ua
+ AddCharset ISO-10646-UCS-2 .ucs2
+ AddCharset ISO-10646-UCS-4 .ucs4
+ AddCharset UTF-8 .utf8
+
+ # The set below does not map to a specific (iso) standard
+ # but works on a fairly wide range of browsers. Note that
+ # capitalization actually matters (it should not, but it
+ # does for some browsers).
+ #
+ # See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets
+ # for a list of sorts. But browsers support few.
+ #
+ AddCharset GB2312 .gb2312 .gb
+ AddCharset utf-7 .utf7
+ AddCharset utf-8 .utf8
+ AddCharset big5 .big5 .b5
+ AddCharset EUC-TW .euc-tw
+ AddCharset EUC-JP .euc-jp
+ AddCharset EUC-KR .euc-kr
+ AddCharset shift_jis .sjis
+
+ #
+ # AddType allows you to add to or override the MIME configuration
+ # file mime.types for specific file types.
+ #
+ AddType application/x-tar .tgz
+
+ #
+ # AddHandler allows you to map certain file extensions to "handlers":
+ # actions unrelated to filetype. These can be either built into the server
+ # or added with the Action directive (see below)
+ #
+ # To use CGI scripts outside of ScriptAliased directories:
+ # (You will also need to add "ExecCGI" to the "Options" directive.)
+ #
+ #AddHandler cgi-script .cgi
+
+ #
+ # For files that include their own HTTP headers:
+ #
+ #AddHandler send-as-is asis
+
+ #
+ # For server-parsed imagemap files:
+ #
+ #AddHandler imap-file map
+
+ #
+ # For type maps (negotiated resources):
+ # (This is enabled by default to allow the Apache "It Worked" page
+ # to be distributed in multiple languages.)
+ #
+ AddHandler type-map var
+
+ # Filters allow you to process content before it is sent to the client.
+ #
+ # To parse .shtml files for server-side includes (SSI):
+ # (You will also need to add "Includes" to the "Options" directive.)
+ #
+ #AddType text/html .shtml
+ #AddOutputFilter INCLUDES .shtml
-# Filters allow you to process content before it is sent to the client.
-#
-# To parse .shtml files for server-side includes (SSI):
-# (You will also need to add "Includes" to the "Options" directive.)
-#
-#AddType text/html .shtml
-#AddOutputFilter INCLUDES .shtml
+</IfModule>
#
# Action lets you define media types that will execute a script whenever
@@ -918,24 +939,27 @@
</IfModule>
</IfModule>
-#
-# The following directives modify normal HTTP response behavior to
-# handle known problems with browser implementations.
-#
-BrowserMatch "Mozilla/2" nokeepalive
-BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
-BrowserMatch "RealPlayer 4\.0" force-response-1.0
-BrowserMatch "Java/1\.0" force-response-1.0
-BrowserMatch "JDK/1\.0" force-response-1.0
-
-#
-# The following directive disables redirects on non-GET requests for
-# a directory that does not include the trailing slash. This fixes a
-# problem with Microsoft WebFolders which does not appropriately handle
-# redirects for folders with DAV methods.
-#
-BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
-BrowserMatch "^WebDrive" redirect-carefully
+<IfModule mod_setenvif.c>
+ #
+ # The following directives modify normal HTTP response behavior to
+ # handle known problems with browser implementations.
+ #
+ BrowserMatch "Mozilla/2" nokeepalive
+ BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
+ BrowserMatch "RealPlayer 4\.0" force-response-1.0
+ BrowserMatch "Java/1\.0" force-response-1.0
+ BrowserMatch "JDK/1\.0" force-response-1.0
+
+ #
+ # The following directive disables redirects on non-GET requests for
+ # a directory that does not include the trailing slash. This fixes a
+ # problem with Microsoft WebFolders which does not appropriately handle
+ # redirects for folders with DAV methods.
+ #
+ BrowserMatch "Microsoft Data Access Internet Publishing Provider"
+redirect-carefully
+ BrowserMatch "^WebDrive" redirect-carefully
+
+</IfModule>
#
# Allow server status reports, with the URL of http://servername/server-status
