Are the paths where yoour trying to save the image correct on all servers ? Try the event log on the server as som COM objects save errors in here.
> -----Original Message----- > From: Giles Roadnight [mailto:[EMAIL PROTECTED]] > Sent: 08 February 2003 20:58 > To: [EMAIL PROTECTED] > Subject: [ cf-dev ] ImageMagick > > > Hi Guys > > I have been using imagemagick for a while on a site that gets > very low traffic. I am trying to get it to work on a new site > but have just realised that ImageMagick no longer works on > the server. The code works fine on my desktop but the same > code will not work on the production server on the old site > or the new site. > > It works by Com and you have to register a DLL with regsvr32. > I have tried unregistering and re-registering it but it still > does not work. I don't get any error messages but the image > that is supposed to be generated isn't. The tag must be doing > something though as afterwards the width and height variables > are set to 0. > > Can anyone suggest what I should try next? I have tried > looking for some error or message variables produced by the > com object but couldn't find any. > > Thanks > > > Giles Roadnight > http://giles.roadnight.name > > > -- > ** Archive: http://www.mail-archive.com/dev%40lists.cfdeveloper.co.uk/ > > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: > [EMAIL PROTECTED] For human help, e-mail: > [EMAIL PROTECTED] > > -- ** Archive: http://www.mail-archive.com/dev%40lists.cfdeveloper.co.uk/ To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] For human help, e-mail: [EMAIL PROTECTED]
