Along the installation lines:
Does anyone know where/how I can get hold of the new connector source
files ({cf_root}\runtime\connectors\src\ApacheModule.zip) _without_
upgrading first? We're still using Apache 1.3.x so need to recompile
the connector on an upgrade.
I think it's rather daft that when you're trying to minimse downtime on
an upgrade, MM make you install the upgrade, _then_ get the connector
source (after un-archiving the appropriate jar files to get at it),
checking through the compile instructions for the appropriate version
etc etc etc...
Also, in updater 3, the default setting for allowing flash remoting
calls was "off" -- is this reset in 6.1?
Tim.
-------------------------------------------------------
RAWNET LTD - Internet, New Media and ebusiness Gurus.
Visit our new website at http://www.rawnet.com for
more information about our company, or call us free
anytime on 0800 294 24 24.
-------------------------------------------------------
Tim Blair
Web Application Engineer, Rawnet Limited
Direct Phone : +44 (0) 1344 393 441
Switchboard : +44 (0) 1344 393 040
-------------------------------------------------------
This message may contain information which is legally
privileged and/or confidential. If you are not the
intended recipient, you are hereby notified that any
unauthorised disclosure, copying, distribution or use
of this information is strictly prohibited. Such
notification notwithstanding, any comments, opinions,
information or conclusions expressed in this message
are those of the originator, not of rawnet limited,
unless otherwise explicitly and independently indicated
by an authorised representative of rawnet limited.
-------------------------------------------------------
--
** Archive: http://www.mail-archive.com/dev%40lists.cfdeveloper.co.uk/
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
For human help, e-mail: [EMAIL PROTECTED]
