> I'm having problems trying to call the PostCodeAnywhere > webservice
I had the exact same problem a few months ago and unfortunately never solved it. :( I spent a good couple of days searching all over the shop for info and trying all the different ways I could think of to pass the values of the correct type. I even had the PCA developers on the case and they couldn't help either. Getting the list of addresses under a postcode is fine but it's when you go to use the ByPostcode() function that it goes wrong. I ended up using a cfhttp post to get the actual XML address data. No help I know... Sorry. :o\ Tim. ------------------------------------------------------- RAWNET LTD - Internet, New Media and ebusiness Gurus. Visit our new website at http://www.rawnet.com for more information about our company, or call us free anytime on 0800 294 24 24. ------------------------------------------------------- Tim Blair Web Application Engineer, Rawnet Limited Direct Phone : +44 (0) 1344 393 441 Switchboard : +44 (0) 1344 393 040 ------------------------------------------------------- This message may contain information which is legally privileged and/or confidential. If you are not the intended recipient, you are hereby notified that any unauthorised disclosure, copying, distribution or use of this information is strictly prohibited. Such notification notwithstanding, any comments, opinions, information or conclusions expressed in this message are those of the originator, not of rawnet limited, unless otherwise explicitly and independently indicated by an authorised representative of rawnet limited. ------------------------------------------------------- -- ** Archive: http://www.mail-archive.com/dev%40lists.cfdeveloper.co.uk/ To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] For human help, e-mail: [EMAIL PROTECTED]
