On 01/07/15 18:19, Nischal Sheth wrote:
Hi Stefan,
Can you check how many BGP paths the GW router(s) has to the
floating IP in question in steady state? If you are using an MX you
can use "show route table xyz.inet.0". There should ideally be 2
paths learnt from 2 control-nodes.
Hey Nischal,
it seems only only shows 1 path there. How can we debug this further?
Regards,
Stefan
-Nischal
On Jul 1, 2015, at 7:48 AM, Stefan Andres <[email protected]> wrote:
Hi,
we have a setup with 3 contrail-control nodes.
We've seen that when we hard-power off on of those nodes, there is a
25-45s packet loss to VM's floating IPs.
I'd expect the floating IPs not to have any packet loss at all, since
the default BPG TTL should be 30s and in this time, the other
contrail-process should already have taken over.
What's the concept there and how to tweak those settings?
Regards,
Stefan
_______________________________________________
Dev mailing list
[email protected]
http://lists.opencontrail.org/mailman/listinfo/dev_lists.opencontrail.org
--
SysEleven GmbH
Umspannwerk - Aufgang C
Ohlauer Straße 43
10999 Berlin
Tel +49 30 233 2012 0
Fax +49 30 616 755 50
http://www.syseleven.de
http://www.facebook.com/SysEleven
Firmensitz: Berlin
Registergericht: AG Berlin Charlottenburg, HRB 108571 B
Geschäftsführer: Marc Korthaus, Thomas Lohner
_______________________________________________
Dev mailing list
[email protected]
http://lists.opencontrail.org/mailman/listinfo/dev_lists.opencontrail.org
