Hi Robert.
I was just running it from two different locations (workspaces), otherwise
no real differences. Both are valid workspaces.
-Chris
On Sat, Jun 9, 2012 at 11:20 PM, Robert Scholte <apa...@sourcegrounds.com>wrote:
> Hi Chris,
>
> yes, I would expect it between "Verifying that there are no local
> modifications..." and "Checking dependencies and plugins for snapshots
> ...", unless there's no reason to call it.
> This latest log doesn't match your first log, which failed right after the
> "Working directory..." - info line.
>
> I don't know if it matters, but I see a difference between the working
> directories:
>
> [INFO] Working directory: C:\tmp\release-workspace\GPDB
> versus
>
> [INFO] Working directory: C:\CALMData\Workspaces\RTC\**Deb\GPDB
>
> -Robert
>
> Op Sat, 09 Jun 2012 14:54:10 +0200 schreef Chris Graham <
> chrisgw...@gmail.com>:
>
> Hi Robert.
>>
>> Found a few minutes...
>>
>> As far as I can see, the method toRelativePath is not being called.
>>
>> When are you expecting it to be called? I would have thought at the check
>> for local modifications.
>>
>> But, this is what I'm seeing:
>>
>> [INFO]
>> ------------------------------**------------------------------**
>> ------------
>> [INFO] Building GPDB - J2EE Multi Module Project
>> [INFO] task-segment: [release:prepare, release:perform]
>> (aggregator-style)
>> [INFO]
>> ------------------------------**------------------------------**
>> ------------
>> [INFO] [release:prepare {execution: default-cli}]
>> [INFO] Verifying that there are no local modifications...
>> [INFO] ignoring changes on: **\pom.xml.branch, **\pom.xml.backup,
>> **\pom.xml.releaseBackup, **\release.properties, **\pom.xml.next,
>> **\pom.xml.tag
>> [INFO] Executing: cmd.exe /X /C "scm status --username Deb --password
>> *****
>> --wide"
>> [INFO] Working directory: C:\CALMData\Workspaces\RTC\**Deb\GPDB
>> [INFO] Checking dependencies and plugins for snapshots ...
>> [INFO] Transforming 'GPDB - J2EE Multi Module Project'...
>> JazzScmTranslator.**translateTagUrl():
>> JazzScmTranslator.**translateTagUrl():
>> JazzScmTranslator.**translateTagUrl():
>> JazzScmTranslator.resolveTag()**:
>> [INFO] Transforming 'GPDB - Resources Project'...
>> [INFO] Transforming 'GPDB - WAR Project'...
>> [INFO] Updating GPDBResources to 1.0.42
>> [INFO] Transforming 'GPDB - EAR Project'...
>> [INFO] Updating GPDBWeb to 1.0.42
>> [INFO] Not generating release POMs
>> [INFO] Executing goals 'clean verify'...
>>
>> -Chris
>>
>> On Sat, Jun 9, 2012 at 6:21 AM, Robert Scholte <apa...@sourcegrounds.com>
>> **wrote:
>>
>> Hi Chris,
>>>
>>> I'd like to do a 2.3.2 release somewhere next week.
>>> Could you investigate this issue?
>>>
>>> -Robert
>>>
>>> Op Sat, 02 Jun 2012 12:24:01 +0200 schreef Chris Graham <
>>> chrisgw...@gmail.com>:
>>>
>>>
>>> Now that I have my VM (where I've done all of my jazz development) back
>>>
>>>> able to talk to the Internet, I'll give it a go.
>>>>
>>>> -Chris
>>>>
>>>> Sent from my iPhone
>>>>
>>>> On 02/06/2012, at 6:17 PM, "Robert Scholte" <apa...@sourcegrounds.com>
>>>> wrote:
>>>>
>>>> Hi Chris,
>>>>
>>>>>
>>>>> can you confirm that the org.apache.maven.shared.**
>>>>> release.scm.JazzScmTranslator.****toRelativePath(String) is executed?
>>>>>
>>>>> I've written unittests for this method, which reflect your usecase.
>>>>> Have
>>>>> a look at them too.
>>>>>
>>>>> -Robert
>>>>>
>>>>> Op Sat, 02 Jun 2012 05:46:14 +0200 schreef Chris Graham <
>>>>> chrisgw...@gmail.com>:
>>>>>
>>>>> Hi All.
>>>>>
>>>>>>
>>>>>> Sorry for that the fact that it's taken me so long to get around to
>>>>>> testing
>>>>>> the 2.3.1 release plugin, but my laptop had some 'firewall issues'
>>>>>> that
>>>>>> needed to be resolved by IBM.
>>>>>>
>>>>>> So, I checked out a new jazz workspace, and attempted my first release
>>>>>> in
>>>>>> it, and this is what I got:
>>>>>>
>>>>>> C:\tmp\release-workspace\GPDB>****mvn -B -Dresume=false
>>>>>> -DworkingDirectory=C:\tmp\****maven release:prepare release:perform
>>>>>> [INFO] Scanning for projects...
>>>>>> [INFO] snapshot au.com.warpspeed:warpspeed-****
>>>>>> dynamic-parent:1-SNAPSHOT:
>>>>>>
>>>>>> checking for updates from warpspeed.repos
>>>>>> [WARNING] repository metadata for: 'snapshot
>>>>>> au.com.warpspeed:warpspeed-****dynamic-parent:1-SNAPSHOT' could not
>>>>>> be
>>>>>>
>>>>>> retrieved from repository: warpspeed.repos due to an
>>>>>> error: Authorization failed: Access denied to:
>>>>>> http://archiva.warpspeed.com.****au/archiva/repository/**
>>>>>> warpspeed.repos/au/com/****warpspeed/warpspeed-dynamic-****
>>>>>> parent/1-SNAPSHO<http://**archiva.warpspeed.com.au/**
>>>>>> archiva/repository/warpspeed.**repos/au/com/warpspeed/**
>>>>>> warpspeed-dynamic-parent/1-**SNAPSHO<http://archiva.warpspeed.com.au/archiva/repository/warpspeed.repos/au/com/warpspeed/warpspeed-dynamic-parent/1-SNAPSHO>
>>>>>> >
>>>>>>
>>>>>> T/maven-metadata.xml
>>>>>> [INFO] Repository 'warpspeed.repos' will be blacklisted
>>>>>> [INFO] Reactor build order:
>>>>>> [INFO] GPDB - J2EE Multi Module Project
>>>>>> [INFO] GPDB - Resources Project
>>>>>> [INFO] GPDB - WAR Project
>>>>>> [INFO] GPDB - EAR Project
>>>>>> [INFO]
>>>>>> ------------------------------****----------------------------**--**
>>>>>>
>>>>>> ------------
>>>>>> [INFO] Building GPDB - J2EE Multi Module Project
>>>>>> [INFO] task-segment: [release:prepare, release:perform]
>>>>>> (aggregator-style)
>>>>>> [INFO]
>>>>>> ------------------------------****----------------------------**--**
>>>>>>
>>>>>> ------------
>>>>>> [INFO] [release:prepare {execution: default-cli}]
>>>>>> [INFO] Verifying that there are no local modifications...
>>>>>> [INFO] ignoring changes on: **\pom.xml.branch, **\pom.xml.backup,
>>>>>> **\pom.xml.releaseBackup, **\release.properties, **\pom.xml.next,
>>>>>> **\pom.xml.tag
>>>>>> [INFO] Executing: cmd.exe /X /C "scm status --username Deb --password
>>>>>> *****
>>>>>> --wide"
>>>>>> [INFO] Working directory: C:\tmp\release-workspace\GPDB
>>>>>> [INFO]
>>>>>> ------------------------------****----------------------------**--**
>>>>>> ------------
>>>>>> [ERROR] BUILD FAILURE
>>>>>> [INFO]
>>>>>> ------------------------------****----------------------------**--**
>>>>>>
>>>>>> ------------
>>>>>> [INFO] Cannot prepare the release because you have local
>>>>>> modifications :
>>>>>> [/GPDB/release.properties:****added]
>>>>>>
>>>>>> [INFO]
>>>>>> ------------------------------****----------------------------**--**
>>>>>>
>>>>>> ------------
>>>>>> [INFO] For more information, run Maven with the -e switch
>>>>>> [INFO]
>>>>>> ------------------------------****----------------------------**--**
>>>>>>
>>>>>> ------------
>>>>>> [INFO] Total time: 1 minute 11 seconds
>>>>>> [INFO] Finished at: Sat Jun 02 13:24:59 EST 2012
>>>>>> [INFO] Final Memory: 24M/71M
>>>>>> [INFO]
>>>>>> ------------------------------****----------------------------**--**
>>>>>>
>>>>>> ------------
>>>>>> C:\tmp\release-workspace\GPDB>
>>>>>>
>>>>>>
>>>>>> So, it appears that it is still not ignoring some of the temporary
>>>>>> files in
>>>>>> the release process. What that what some of the new methods were meant
>>>>>> to
>>>>>> address? Or have I missed something?
>>>>>>
>>>>>> Here is the output of the "scm status" command that is used to
>>>>>> determine
>>>>>> the status of files.
>>>>>>
>>>>>> C:\tmp\release-workspace\GPDB>****scm status
>>>>>>
>>>>>> Workspace: (1156) "GPDBWorkspace" <-> (1157) "GPDBStream"
>>>>>> Component: (1158) "GPDB" <-> (1157) "GPDBStream"
>>>>>> Baseline: (2222) 36 "GPDB-1.0.36"
>>>>>> Unresolved:
>>>>>> a-- /GPDB/release.properties
>>>>>>
>>>>>> C:\tmp\release-workspace\GPDB>
>>>>>>
>>>>>> This is what is being processed, and you can see the output of the mvn
>>>>>> scm:status command:
>>>>>>
>>>>>> C:\tmp\release-workspace\GPDB>****mvn scm:status
>>>>>> [INFO] Scanning for projects...
>>>>>> [INFO] snapshot au.com.warpspeed:warpspeed-****
>>>>>> dynamic-parent:1-SNAPSHOT:
>>>>>>
>>>>>> checking for updates from warpspeed.repos
>>>>>> [WARNING] repository metadata for: 'snapshot
>>>>>> au.com.warpspeed:warpspeed-****dynamic-parent:1-SNAPSHOT' could not
>>>>>> be
>>>>>>
>>>>>> retrieved from repository: warpspeed.repos due to an
>>>>>> error: Authorization failed: Access denied to:
>>>>>> http://archiva.warpspeed.com.****au/archiva/repository/**
>>>>>> warpspeed.repos/au/com/****warpspeed/warpspeed-dynamic-****
>>>>>> parent/1-SNAPSHO<http://**archiva.warpspeed.com.au/**
>>>>>> archiva/repository/warpspeed.**repos/au/com/warpspeed/**
>>>>>> warpspeed-dynamic-parent/1-**SNAPSHO<http://archiva.warpspeed.com.au/archiva/repository/warpspeed.repos/au/com/warpspeed/warpspeed-dynamic-parent/1-SNAPSHO>
>>>>>> >
>>>>>>
>>>>>> T/maven-metadata.xml
>>>>>> [INFO] Repository 'warpspeed.repos' will be blacklisted
>>>>>> [INFO] Reactor build order:
>>>>>> [INFO] GPDB - J2EE Multi Module Project
>>>>>> [INFO] GPDB - Resources Project
>>>>>> [INFO] GPDB - WAR Project
>>>>>> [INFO] GPDB - EAR Project
>>>>>> [INFO]
>>>>>> ------------------------------****----------------------------**--**
>>>>>>
>>>>>> ------------
>>>>>> [INFO] Building GPDB - J2EE Multi Module Project
>>>>>> [INFO] task-segment: [scm:status] (aggregator-style)
>>>>>> [INFO]
>>>>>> ------------------------------****----------------------------**--**
>>>>>>
>>>>>> ------------
>>>>>> [INFO] [scm:status {execution: default-cli}]
>>>>>> [INFO] Executing: cmd.exe /X /C "scm status --username Deb --password
>>>>>> *****
>>>>>> --wide"
>>>>>> [INFO] Working directory: C:\tmp\release-workspace\GPDB
>>>>>> [INFO] added status for /GPDB/release.properties
>>>>>> [INFO]
>>>>>> ------------------------------****----------------------------**--**
>>>>>> ------------
>>>>>> [INFO] BUILD SUCCESSFUL
>>>>>> [INFO]
>>>>>> ------------------------------****----------------------------**--**
>>>>>>
>>>>>> ------------
>>>>>> [INFO] Total time: 28 seconds
>>>>>> [INFO] Finished at: Sat Jun 02 13:34:00 EST 2012
>>>>>> [INFO] Final Memory: 17M/48M
>>>>>> [INFO]
>>>>>> ------------------------------****----------------------------**--**
>>>>>>
>>>>>> ------------
>>>>>> C:\tmp\release-workspace\GPDB>
>>>>>>
>>>>>> The only workaround so far that I've been able to do is to add
>>>>>> 'release.properties' to the .jazzignore file, so that jazz itself
>>>>>> ignores
>>>>>> the file (much like the svn.ignore property). The file '.jazzignore'
>>>>>> now
>>>>>> looks something like this:
>>>>>>
>>>>>> ### Jazz Ignore 0
>>>>>> # Default value for core.ignore.recursive is *.class
>>>>>> # Changing this value changes check-in behaviour for the entire
>>>>>> project.
>>>>>> #
>>>>>> # Default value for core.ignore is bin
>>>>>> # Changing this value changes check-in behaviour for the local
>>>>>> directory.
>>>>>> #
>>>>>> # Ignore properties should contain a space separated list of filename
>>>>>> patterns.
>>>>>> # Each pattern is case sensitive and surrounded by braces ('{' and
>>>>>> '}').
>>>>>> # "*" matches zero or more characters, and "?" matches single
>>>>>> characters.
>>>>>> #
>>>>>> # e.g: {*.sh} {\.*} ignores shell scripts and hidden files
>>>>>>
>>>>>> # NOTE: modifying ignore files will not change the ignore status of
>>>>>> derived
>>>>>> # resources.
>>>>>>
>>>>>> core.ignore.recursive= \
>>>>>> {*.class} \
>>>>>> {*.log}
>>>>>>
>>>>>> core.ignore= \
>>>>>> {release.properties} \
>>>>>> {target}
>>>>>>
>>>>>> -Chris
>>>>>>
>>>>>>
>>>>> ------------------------------****----------------------------**--**
>>>>> ---------
>>>>> To unsubscribe, e-mail: dev-unsubscribe@maven.apache.****org<
>>>>> dev-unsubscribe@maven.**apache.org <dev-unsubscr...@maven.apache.org>>
>>>>>
>>>>> For additional commands, e-mail: dev-h...@maven.apache.org
>>>>>
>>>>>
>>>>> ------------------------------****----------------------------**
>>>> --**---------
>>>> To unsubscribe, e-mail: dev-unsubscribe@maven.apache.****org<
>>>> dev-unsubscribe@maven.**apache.org <dev-unsubscr...@maven.apache.org>>
>>>>
>>>> For additional commands, e-mail: dev-h...@maven.apache.org
>>>>
>>>>
>>> ------------------------------****----------------------------**
>>> --**---------
>>> To unsubscribe, e-mail: dev-unsubscribe@maven.apache.****org<
>>> dev-unsubscribe@maven.**apache.org <dev-unsubscr...@maven.apache.org>>
>>>
>>> For additional commands, e-mail: dev-h...@maven.apache.org
>>>
>>>
> ------------------------------**------------------------------**---------
> To unsubscribe, e-mail:
> dev-unsubscribe@maven.apache.**org<dev-unsubscr...@maven.apache.org>
> For additional commands, e-mail: dev-h...@maven.apache.org
>
>
