Hi Robert,
We're up to 2.4-SNAPSHOT now?
Nope. Still not being called.
Let me look into it for ya. :-)
-Chris
On Sun, Jun 10, 2012 at 10:26 PM, Chris Graham <chrisgw...@gmail.com> wrote:
> Ok. I'll check it tomorrow.
>
> I'm in Sydney in a hotel room with a WiFi that doesn't.
>
> -Chris
>
> Sent from my iPhone
>
> On 10/06/2012, at 7:34 PM, "Robert Scholte" <apa...@sourcegrounds.com>
> wrote:
>
> > Hi Chris,
> >
> > By coincident Sonar pointed me to this issue.
> > I've created MRELEASE-770 and fixed it.
> > A SNAPSHOT has been deployed, ready for testing.
> >
> > -Robert
> >
> > Op Sun, 10 Jun 2012 06:29:15 +0200 schreef Chris Graham <
> chrisgw...@gmail.com>:
> >
> >> Hi Robert.
> >>
> >> I was just running it from two different locations (workspaces),
> otherwise
> >> no real differences. Both are valid workspaces.
> >>
> >> -Chris
> >>
> >> On Sat, Jun 9, 2012 at 11:20 PM, Robert Scholte <
> apa...@sourcegrounds.com>wrote:
> >>
> >>> Hi Chris,
> >>>
> >>> yes, I would expect it between "Verifying that there are no local
> >>> modifications..." and "Checking dependencies and plugins for snapshots
> >>> ...", unless there's no reason to call it.
> >>> This latest log doesn't match your first log, which failed right after
> the
> >>> "Working directory..." - info line.
> >>>
> >>> I don't know if it matters, but I see a difference between the working
> >>> directories:
> >>>
> >>> [INFO] Working directory: C:\tmp\release-workspace\GPDB
> >>> versus
> >>>
> >>> [INFO] Working directory: C:\CALMData\Workspaces\RTC\**Deb\GPDB
> >>>
> >>> -Robert
> >>>
> >>> Op Sat, 09 Jun 2012 14:54:10 +0200 schreef Chris Graham <
> >>> chrisgw...@gmail.com>:
> >>>
> >>> Hi Robert.
> >>>>
> >>>> Found a few minutes...
> >>>>
> >>>> As far as I can see, the method toRelativePath is not being called.
> >>>>
> >>>> When are you expecting it to be called? I would have thought at the
> check
> >>>> for local modifications.
> >>>>
> >>>> But, this is what I'm seeing:
> >>>>
> >>>> [INFO]
> >>>> ------------------------------**------------------------------**
> >>>> ------------
> >>>> [INFO] Building GPDB - J2EE Multi Module Project
> >>>> [INFO] task-segment: [release:prepare, release:perform]
> >>>> (aggregator-style)
> >>>> [INFO]
> >>>> ------------------------------**------------------------------**
> >>>> ------------
> >>>> [INFO] [release:prepare {execution: default-cli}]
> >>>> [INFO] Verifying that there are no local modifications...
> >>>> [INFO] ignoring changes on: **\pom.xml.branch, **\pom.xml.backup,
> >>>> **\pom.xml.releaseBackup, **\release.properties, **\pom.xml.next,
> >>>> **\pom.xml.tag
> >>>> [INFO] Executing: cmd.exe /X /C "scm status --username Deb --password
> >>>> *****
> >>>> --wide"
> >>>> [INFO] Working directory: C:\CALMData\Workspaces\RTC\**Deb\GPDB
> >>>> [INFO] Checking dependencies and plugins for snapshots ...
> >>>> [INFO] Transforming 'GPDB - J2EE Multi Module Project'...
> >>>> JazzScmTranslator.**translateTagUrl():
> >>>> JazzScmTranslator.**translateTagUrl():
> >>>> JazzScmTranslator.**translateTagUrl():
> >>>> JazzScmTranslator.resolveTag()**:
> >>>> [INFO] Transforming 'GPDB - Resources Project'...
> >>>> [INFO] Transforming 'GPDB - WAR Project'...
> >>>> [INFO] Updating GPDBResources to 1.0.42
> >>>> [INFO] Transforming 'GPDB - EAR Project'...
> >>>> [INFO] Updating GPDBWeb to 1.0.42
> >>>> [INFO] Not generating release POMs
> >>>> [INFO] Executing goals 'clean verify'...
> >>>>
> >>>> -Chris
> >>>>
> >>>> On Sat, Jun 9, 2012 at 6:21 AM, Robert Scholte <
> apa...@sourcegrounds.com>
> >>>> **wrote:
> >>>>
> >>>> Hi Chris,
> >>>>>
> >>>>> I'd like to do a 2.3.2 release somewhere next week.
> >>>>> Could you investigate this issue?
> >>>>>
> >>>>> -Robert
> >>>>>
> >>>>> Op Sat, 02 Jun 2012 12:24:01 +0200 schreef Chris Graham <
> >>>>> chrisgw...@gmail.com>:
> >>>>>
> >>>>>
> >>>>> Now that I have my VM (where I've done all of my jazz development)
> back
> >>>>>
> >>>>>> able to talk to the Internet, I'll give it a go.
> >>>>>>
> >>>>>> -Chris
> >>>>>>
> >>>>>> Sent from my iPhone
> >>>>>>
> >>>>>> On 02/06/2012, at 6:17 PM, "Robert Scholte" <
> apa...@sourcegrounds.com>
> >>>>>> wrote:
> >>>>>>
> >>>>>> Hi Chris,
> >>>>>>
> >>>>>>>
> >>>>>>> can you confirm that the org.apache.maven.shared.**
> >>>>>>> release.scm.JazzScmTranslator.****toRelativePath(String) is
> executed?
> >>>>>>>
> >>>>>>> I've written unittests for this method, which reflect your usecase.
> >>>>>>> Have
> >>>>>>> a look at them too.
> >>>>>>>
> >>>>>>> -Robert
> >>>>>>>
> >>>>>>> Op Sat, 02 Jun 2012 05:46:14 +0200 schreef Chris Graham <
> >>>>>>> chrisgw...@gmail.com>:
> >>>>>>>
> >>>>>>> Hi All.
> >>>>>>>
> >>>>>>>>
> >>>>>>>> Sorry for that the fact that it's taken me so long to get around
> to
> >>>>>>>> testing
> >>>>>>>> the 2.3.1 release plugin, but my laptop had some 'firewall issues'
> >>>>>>>> that
> >>>>>>>> needed to be resolved by IBM.
> >>>>>>>>
> >>>>>>>> So, I checked out a new jazz workspace, and attempted my first
> release
> >>>>>>>> in
> >>>>>>>> it, and this is what I got:
> >>>>>>>>
> >>>>>>>> C:\tmp\release-workspace\GPDB>****mvn -B -Dresume=false
> >>>>>>>> -DworkingDirectory=C:\tmp\****maven release:prepare
> release:perform
> >>>>>>>> [INFO] Scanning for projects...
> >>>>>>>> [INFO] snapshot au.com.warpspeed:warpspeed-****
> >>>>>>>> dynamic-parent:1-SNAPSHOT:
> >>>>>>>>
> >>>>>>>> checking for updates from warpspeed.repos
> >>>>>>>> [WARNING] repository metadata for: 'snapshot
> >>>>>>>> au.com.warpspeed:warpspeed-****dynamic-parent:1-SNAPSHOT' could
> not
> >>>>>>>> be
> >>>>>>>>
> >>>>>>>> retrieved from repository: warpspeed.repos due to an
> >>>>>>>> error: Authorization failed: Access denied to:
> >>>>>>>> http://archiva.warpspeed.com.****au/archiva/repository/**
> >>>>>>>> warpspeed.repos/au/com/****warpspeed/warpspeed-dynamic-****
> >>>>>>>> parent/1-SNAPSHO<http://**archiva.warpspeed.com.au/**
> >>>>>>>> archiva/repository/warpspeed.**repos/au/com/warpspeed/**
> >>>>>>>> warpspeed-dynamic-parent/1-**SNAPSHO<
> http://archiva.warpspeed.com.au/archiva/repository/warpspeed.repos/au/com/warpspeed/warpspeed-dynamic-parent/1-SNAPSHO
> >
> >>>>>>>> >
> >>>>>>>>
> >>>>>>>> T/maven-metadata.xml
> >>>>>>>> [INFO] Repository 'warpspeed.repos' will be blacklisted
> >>>>>>>> [INFO] Reactor build order:
> >>>>>>>> [INFO] GPDB - J2EE Multi Module Project
> >>>>>>>> [INFO] GPDB - Resources Project
> >>>>>>>> [INFO] GPDB - WAR Project
> >>>>>>>> [INFO] GPDB - EAR Project
> >>>>>>>> [INFO]
> >>>>>>>>
> ------------------------------****----------------------------**--**
> >>>>>>>>
> >>>>>>>> ------------
> >>>>>>>> [INFO] Building GPDB - J2EE Multi Module Project
> >>>>>>>> [INFO] task-segment: [release:prepare, release:perform]
> >>>>>>>> (aggregator-style)
> >>>>>>>> [INFO]
> >>>>>>>>
> ------------------------------****----------------------------**--**
> >>>>>>>>
> >>>>>>>> ------------
> >>>>>>>> [INFO] [release:prepare {execution: default-cli}]
> >>>>>>>> [INFO] Verifying that there are no local modifications...
> >>>>>>>> [INFO] ignoring changes on: **\pom.xml.branch,
> **\pom.xml.backup,
> >>>>>>>> **\pom.xml.releaseBackup, **\release.properties, **\pom.xml.next,
> >>>>>>>> **\pom.xml.tag
> >>>>>>>> [INFO] Executing: cmd.exe /X /C "scm status --username Deb
> --password
> >>>>>>>> *****
> >>>>>>>> --wide"
> >>>>>>>> [INFO] Working directory: C:\tmp\release-workspace\GPDB
> >>>>>>>> [INFO]
> >>>>>>>>
> ------------------------------****----------------------------**--**
> >>>>>>>> ------------
> >>>>>>>> [ERROR] BUILD FAILURE
> >>>>>>>> [INFO]
> >>>>>>>>
> ------------------------------****----------------------------**--**
> >>>>>>>>
> >>>>>>>> ------------
> >>>>>>>> [INFO] Cannot prepare the release because you have local
> >>>>>>>> modifications :
> >>>>>>>> [/GPDB/release.properties:****added]
> >>>>>>>>
> >>>>>>>> [INFO]
> >>>>>>>>
> ------------------------------****----------------------------**--**
> >>>>>>>>
> >>>>>>>> ------------
> >>>>>>>> [INFO] For more information, run Maven with the -e switch
> >>>>>>>> [INFO]
> >>>>>>>>
> ------------------------------****----------------------------**--**
> >>>>>>>>
> >>>>>>>> ------------
> >>>>>>>> [INFO] Total time: 1 minute 11 seconds
> >>>>>>>> [INFO] Finished at: Sat Jun 02 13:24:59 EST 2012
> >>>>>>>> [INFO] Final Memory: 24M/71M
> >>>>>>>> [INFO]
> >>>>>>>>
> ------------------------------****----------------------------**--**
> >>>>>>>>
> >>>>>>>> ------------
> >>>>>>>> C:\tmp\release-workspace\GPDB>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> So, it appears that it is still not ignoring some of the temporary
> >>>>>>>> files in
> >>>>>>>> the release process. What that what some of the new methods were
> meant
> >>>>>>>> to
> >>>>>>>> address? Or have I missed something?
> >>>>>>>>
> >>>>>>>> Here is the output of the "scm status" command that is used to
> >>>>>>>> determine
> >>>>>>>> the status of files.
> >>>>>>>>
> >>>>>>>> C:\tmp\release-workspace\GPDB>****scm status
> >>>>>>>>
> >>>>>>>> Workspace: (1156) "GPDBWorkspace" <-> (1157) "GPDBStream"
> >>>>>>>> Component: (1158) "GPDB" <-> (1157) "GPDBStream"
> >>>>>>>> Baseline: (2222) 36 "GPDB-1.0.36"
> >>>>>>>> Unresolved:
> >>>>>>>> a-- /GPDB/release.properties
> >>>>>>>>
> >>>>>>>> C:\tmp\release-workspace\GPDB>
> >>>>>>>>
> >>>>>>>> This is what is being processed, and you can see the output of
> the mvn
> >>>>>>>> scm:status command:
> >>>>>>>>
> >>>>>>>> C:\tmp\release-workspace\GPDB>****mvn scm:status
> >>>>>>>> [INFO] Scanning for projects...
> >>>>>>>> [INFO] snapshot au.com.warpspeed:warpspeed-****
> >>>>>>>> dynamic-parent:1-SNAPSHOT:
> >>>>>>>>
> >>>>>>>> checking for updates from warpspeed.repos
> >>>>>>>> [WARNING] repository metadata for: 'snapshot
> >>>>>>>> au.com.warpspeed:warpspeed-****dynamic-parent:1-SNAPSHOT' could
> not
> >>>>>>>> be
> >>>>>>>>
> >>>>>>>> retrieved from repository: warpspeed.repos due to an
> >>>>>>>> error: Authorization failed: Access denied to:
> >>>>>>>> http://archiva.warpspeed.com.****au/archiva/repository/**
> >>>>>>>> warpspeed.repos/au/com/****warpspeed/warpspeed-dynamic-****
> >>>>>>>> parent/1-SNAPSHO<http://**archiva.warpspeed.com.au/**
> >>>>>>>> archiva/repository/warpspeed.**repos/au/com/warpspeed/**
> >>>>>>>> warpspeed-dynamic-parent/1-**SNAPSHO<
> http://archiva.warpspeed.com.au/archiva/repository/warpspeed.repos/au/com/warpspeed/warpspeed-dynamic-parent/1-SNAPSHO
> >
> >>>>>>>> >
> >>>>>>>>
> >>>>>>>> T/maven-metadata.xml
> >>>>>>>> [INFO] Repository 'warpspeed.repos' will be blacklisted
> >>>>>>>> [INFO] Reactor build order:
> >>>>>>>> [INFO] GPDB - J2EE Multi Module Project
> >>>>>>>> [INFO] GPDB - Resources Project
> >>>>>>>> [INFO] GPDB - WAR Project
> >>>>>>>> [INFO] GPDB - EAR Project
> >>>>>>>> [INFO]
> >>>>>>>>
> ------------------------------****----------------------------**--**
> >>>>>>>>
> >>>>>>>> ------------
> >>>>>>>> [INFO] Building GPDB - J2EE Multi Module Project
> >>>>>>>> [INFO] task-segment: [scm:status] (aggregator-style)
> >>>>>>>> [INFO]
> >>>>>>>>
> ------------------------------****----------------------------**--**
> >>>>>>>>
> >>>>>>>> ------------
> >>>>>>>> [INFO] [scm:status {execution: default-cli}]
> >>>>>>>> [INFO] Executing: cmd.exe /X /C "scm status --username Deb
> --password
> >>>>>>>> *****
> >>>>>>>> --wide"
> >>>>>>>> [INFO] Working directory: C:\tmp\release-workspace\GPDB
> >>>>>>>> [INFO] added status for /GPDB/release.properties
> >>>>>>>> [INFO]
> >>>>>>>>
> ------------------------------****----------------------------**--**
> >>>>>>>> ------------
> >>>>>>>> [INFO] BUILD SUCCESSFUL
> >>>>>>>> [INFO]
> >>>>>>>>
> ------------------------------****----------------------------**--**
> >>>>>>>>
> >>>>>>>> ------------
> >>>>>>>> [INFO] Total time: 28 seconds
> >>>>>>>> [INFO] Finished at: Sat Jun 02 13:34:00 EST 2012
> >>>>>>>> [INFO] Final Memory: 17M/48M
> >>>>>>>> [INFO]
> >>>>>>>>
> ------------------------------****----------------------------**--**
> >>>>>>>>
> >>>>>>>> ------------
> >>>>>>>> C:\tmp\release-workspace\GPDB>
> >>>>>>>>
> >>>>>>>> The only workaround so far that I've been able to do is to add
> >>>>>>>> 'release.properties' to the .jazzignore file, so that jazz itself
> >>>>>>>> ignores
> >>>>>>>> the file (much like the svn.ignore property). The file
> '.jazzignore'
> >>>>>>>> now
> >>>>>>>> looks something like this:
> >>>>>>>>
> >>>>>>>> ### Jazz Ignore 0
> >>>>>>>> # Default value for core.ignore.recursive is *.class
> >>>>>>>> # Changing this value changes check-in behaviour for the entire
> >>>>>>>> project.
> >>>>>>>> #
> >>>>>>>> # Default value for core.ignore is bin
> >>>>>>>> # Changing this value changes check-in behaviour for the local
> >>>>>>>> directory.
> >>>>>>>> #
> >>>>>>>> # Ignore properties should contain a space separated list of
> filename
> >>>>>>>> patterns.
> >>>>>>>> # Each pattern is case sensitive and surrounded by braces ('{' and
> >>>>>>>> '}').
> >>>>>>>> # "*" matches zero or more characters, and "?" matches single
> >>>>>>>> characters.
> >>>>>>>> #
> >>>>>>>> # e.g: {*.sh} {\.*} ignores shell scripts and hidden files
> >>>>>>>>
> >>>>>>>> # NOTE: modifying ignore files will not change the ignore status
> of
> >>>>>>>> derived
> >>>>>>>> # resources.
> >>>>>>>>
> >>>>>>>> core.ignore.recursive= \
> >>>>>>>> {*.class} \
> >>>>>>>> {*.log}
> >>>>>>>>
> >>>>>>>> core.ignore= \
> >>>>>>>> {release.properties} \
> >>>>>>>> {target}
> >>>>>>>>
> >>>>>>>> -Chris
> >>>>>>>>
> >>>>>>>>
> >>>>>>>
> ------------------------------****----------------------------**--**
> >>>>>>> ---------
> >>>>>>> To unsubscribe, e-mail: dev-unsubscribe@maven.apache.****org<
> >>>>>>> dev-unsubscribe@maven.**apache.org <
> dev-unsubscr...@maven.apache.org>>
> >>>>>>>
> >>>>>>> For additional commands, e-mail: dev-h...@maven.apache.org
> >>>>>>>
> >>>>>>>
> >>>>>>> ------------------------------****----------------------------**
> >>>>>> --**---------
> >>>>>> To unsubscribe, e-mail: dev-unsubscribe@maven.apache.****org<
> >>>>>> dev-unsubscribe@maven.**apache.org <
> dev-unsubscr...@maven.apache.org>>
> >>>>>>
> >>>>>> For additional commands, e-mail: dev-h...@maven.apache.org
> >>>>>>
> >>>>>>
> >>>>> ------------------------------****----------------------------**
> >>>>> --**---------
> >>>>> To unsubscribe, e-mail: dev-unsubscribe@maven.apache.****org<
> >>>>> dev-unsubscribe@maven.**apache.org <dev-unsubscr...@maven.apache.org
> >>
> >>>>>
> >>>>> For additional commands, e-mail: dev-h...@maven.apache.org
> >>>>>
> >>>>>
> >>>
> ------------------------------**------------------------------**---------
> >>> To unsubscribe, e-mail: dev-unsubscribe@maven.apache.**org<
> dev-unsubscr...@maven.apache.org>
> >>> For additional commands, e-mail: dev-h...@maven.apache.org
> >>>
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: dev-unsubscr...@maven.apache.org
> > For additional commands, e-mail: dev-h...@maven.apache.org
> >
>
