As an alternate workaround, if you don't need the Java support (you're not
running a JVM framework like Spark/Hadoop/Marathon), then you could use
`configure --disable-java` to skip all the maven/pom build steps.

By disabling Java, you could at least check that the rest of Mesos builds
and runs fine, which would still work with C++, Python, or Go frameworks,
or even any Java frameworks using the pure Java bindings (jesos).

On Mon, Nov 3, 2014 at 2:01 PM, Joris Van Remoortere <jo...@mesosphere.io>
wrote:

> Did you verify that the settings.xml file was parsed using mvn -X?
>
> Specifically after the first few lines you will see something along the
> lines of:
> [DEBUG] Reading global settings from /usr/share/maven/conf/settings.xml
> [DEBUG] Reading user settings from /home/abc/.m2/settings.xml
> [DEBUG] Using local repository at /home/abc/.m2/repository
>
> Make sure your settings file is in the right location.
>
> On Mon, Nov 3, 2014 at 11:51 AM, Sweta Rani <swetarani3...@gmail.com>
> wrote:
>
> > I use campus proxy configuration for internet. But I am unable to run
> make
> > in installing Mesos on my Ubuntu -14.04, as it ends up with ERROR(1).
> Upon
> > searching, I created settings.xml file inside .m2 with the required
> > configuration but failed again. Please help me out, as it is greatly
> > hindering me from my work.
> >
> > On Sat Nov 01 2014 at 3:38:57 AM Joris Van Remoortere <
> jo...@mesosphere.io
> > >
> > wrote:
> >
> > > I think this suggests you're fetching through a proxy:
> > > *Proxy request sent, awaiting response... 200 OK*
> > >
> > > When I wget this is my output:
> > >  wget http://repo.maven.apache.org/maven2/org/apache/apache/11/
> > > apache-11.pom
> > > --2014-10-31
> > > <
> >
> http://repo.maven.apache.org/maven2/org/apache/apache/11/apache-11.pom--2014-10-31
> > >
> > > 15:05:32--
> > > http://repo.maven.apache.org/maven2/org/apache/apache/11/apache-11.pom
> > > Resolving repo.maven.apache.org (repo.maven.apache.org)...
> 23.235.47.215
> > > Connecting to repo.maven.apache.org
> > > (repo.maven.apache.org)|23.235.47.215|:80...
> > > connected.
> > > *HTTP request sent, awaiting response... 200 OK*
> > >
> > > I think you might need to set up your proxy along these lines:
> > > http://maven.apache.org/guides/mini/guide-proxies.html ... but I am
> not
> > > familiar with Maven.
> > >
> > > Joris
> > >
> > >
> > > On Fri, Oct 31, 2014 at 2:36 PM, Sweta Rani <swetarani3...@gmail.com>
> > > wrote:
> > >
> > > > Tried wget for all the given https, it was successful but still after
> > > that
> > > > make was not successful and make check says "YOU HAVE 3 DISABLED
> TESTS"
> > > >
> > > > proxima@Centauri:~/mesos/build$ wget
> > > >
> http://repo.maven.apache.org/maven2/org/apache/apache/11/apache-11.pom
> > > > --2014-11-01 02:55:51--
> > > >
> http://repo.maven.apache.org/maven2/org/apache/apache/11/apache-11.pom
> > > > Connecting to 10.3.100.207:8080... connected.
> > > > Proxy request sent, awaiting response... 200 OK
> > > > Length: 14811 (14K) [text/xml]
> > > > Saving to: ‘apache-11.pom’
> > > >
> > > > >> *Joris Van Remoortere*
> > > >
> > > > On Sat Nov 01 2014 at 2:36:27 AM Joris Van Remoortere <
> > > jo...@mesosphere.io
> > > > >
> > > > wrote:
> > > >
> > > > > That seems like you might have a connectivity / firewall issue.
> > > > > Can you try just doing a wget on that artifact?
> > > > >
> > > > > On Fri, Oct 31, 2014 at 1:56 PM, Sweta Rani <
> swetarani3...@gmail.com
> > >
> > > > > wrote:
> > > > >
> > > > > > I tried it again but failed with following errors :
> > > > > >
> > > > > > make[1]: Entering directory `/home/proxima/mesos/build/src'
> > > > > > Building mesos-0.21.0.jar ...
> > > > > > [INFO] Scanning for projects...
> > > > > > Downloading:
> > > > > > http://repo.maven.apache.org/maven2/org/apache/apache/11/
> > > apache-11.pom
> > > > > > [ERROR] The build could not read 1 project -> [Help 1]
> > > > > > [ERROR]
> > > > > > [ERROR]   The project org.apache.mesos:mesos:0.21.0
> > > > > > (/home/proxima/mesos/build/src/java/mesos.pom) has 1 error
> > > > > > [ERROR]     Non-resolvable parent POM: Could not transfer
> artifact
> > > > > > org.apache:apache:pom:11 from/to central (
> > > > > > http://repo.maven.apache.org/maven2): Connection to
> > > > > > http://repo.maven.apache.org refused and 'parent.relativePath'
> > > points
> > > > at
> > > > > > wrong local POM @ line 18, column 11: Connection refused -> [Help
> > 2]
> > > > > > [ERROR]
> > > > > > [ERROR] To see the full stack trace of the errors, re-run Maven
> > with
> > > > the
> > > > > -e
> > > > > > switch.
> > > > > > [ERROR] Re-run Maven using the -X switch to enable full debug
> > > logging.
> > > > > > [ERROR]
> > > > > > [ERROR] For more information about the errors and possible
> > solutions,
> > > > > > please read the following articles:
> > > > > > [ERROR] [Help 1]
> > > > > > http://cwiki.apache.org/confluence/display/MAVEN/ProjectBuil
> > > > > dingException
> > > > > > [ERROR] [Help 2]
> > > > > > http://cwiki.apache.org/confluence/display/MAVEN/Unresolvabl
> > > > > eModelException
> > > > > > make[1]: *** [java/target/mesos-0.21.0.jar] Error 1
> > > > > > make[1]: Leaving directory `/home/proxima/mesos/build/src'
> > > > > > make: *** [all-recursive] Error 1
> > > > > >
> > > > > >
> > > > > > On Fri Oct 31 2014 at 1:09:15 PM Sweta Rani <
> > swetarani3...@gmail.com
> > > >
> > > > > > wrote:
> > > > > >
> > > > > > > yaa..  followed the steps as directed in the documentation
> > > > > > >
> > > > > > > *Sweta Rani*
> > > > > > > *3rd Year Undergraduate*
> > > > > > > *Department of Electrical Engineering*
> > > > > > > *IIT Kharagpur <http://www.iitkgp.ac.in/>*
> > > > > > >
> > > > > > > On Fri, Oct 31, 2014 at 3:14 AM, Dominic Hamon <
> > > > > dha...@twopensource.com>
> > > > > > > wrote:
> > > > > > >
> > > > > > >> Let's tackle the easy stuff: did you run bootstrap and
> configure
> > > as
> > > > > per
> > > > > > >> the
> > > > > > >> getting started doc?
> > > > > > >> On Oct 30, 2014 2:04 PM, "Sweta Rani" <
> swetarani3...@gmail.com>
> > > > > wrote:
> > > > > > >>
> > > > > > >> > Tried all the suggestions and tips given in JIRA and
> different
> > > > > google
> > > > > > >> > forums but still the error remains same.
> > > > > > >> >
> > > > > > >> > Making all in .
> > > > > > >> > make[1]: Entering directory `/home/proxima/mesos/build'
> > > > > > >> > make[1]: Nothing to be done for `all-am'.
> > > > > > >> > make[1]: Leaving directory `/home/proxima/mesos/build'
> > > > > > >> > Making all in 3rdparty
> > > > > > >> > make[1]: Entering directory `/home/proxima/mesos/build/
> > > 3rdparty'
> > > > > > >> > make  all-recursive
> > > > > > >> > make[2]: Entering directory `/home/proxima/mesos/build/
> > > 3rdparty'
> > > > > > >> > Making all in libprocess
> > > > > > >> > make[3]: Entering directory
> > > > > > >> `/home/proxima/mesos/build/3rdparty/libprocess'
> > > > > > >> > Making all in 3rdparty
> > > > > > >> > make[4]: Entering directory
> > > > > > >> > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty'
> > > > > > >> > make  all-recursive
> > > > > > >> > make[5]: Entering directory
> > > > > > >> > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty'
> > > > > > >> > Making all in stout
> > > > > > >> > make[6]: Entering directory
> > > > > > >> >
> `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty/stout'
> > > > > > >> > Making all in .
> > > > > > >> > make[7]: Entering directory
> > > > > > >> >
> `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty/stout'
> > > > > > >> > make[7]: Nothing to be done for `all-am'.
> > > > > > >> > make[7]: Leaving directory
> > > > > > >> >
> `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty/stout'
> > > > > > >> > Making all in include
> > > > > > >> > make[7]: Entering directory
> > > > > > >> > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty/stou
> > > > > t/include'
> > > > > > >> > make[7]: Nothing to be done for `all'.
> > > > > > >> > make[7]: Leaving directory
> > > > > > >> > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty/stou
> > > > > t/include'
> > > > > > >> > make[6]: Leaving directory
> > > > > > >> >
> `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty/stout'
> > > > > > >> > make[6]: Entering directory
> > > > > > >> > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty'
> > > > > > >> > make[6]: Nothing to be done for `all-am'.
> > > > > > >> > make[6]: Leaving directory
> > > > > > >> > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty'
> > > > > > >> > make[5]: Leaving directory
> > > > > > >> > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty'
> > > > > > >> > make[4]: Leaving directory
> > > > > > >> > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty'
> > > > > > >> > Making all in .
> > > > > > >> > make[4]: Entering directory
> > > > > > >> `/home/proxima/mesos/build/3rdparty/libprocess'
> > > > > > >> > make[4]: Nothing to be done for `all-am'.
> > > > > > >> > make[4]: Leaving directory
> > > > > > >> `/home/proxima/mesos/build/3rdparty/libprocess'
> > > > > > >> > Making all in include
> > > > > > >> > make[4]: Entering directory
> > > > > > >> > `/home/proxima/mesos/build/3rdparty/libprocess/include'
> > > > > > >> > make[4]: Nothing to be done for `all'.
> > > > > > >> > make[4]: Leaving directory
> > > > > > >> > `/home/proxima/mesos/build/3rdparty/libprocess/include'
> > > > > > >> > make[3]: Leaving directory
> > > > > > >> `/home/proxima/mesos/build/3rdparty/libprocess'
> > > > > > >> > make[3]: Entering directory `/home/proxima/mesos/build/
> > > 3rdparty'
> > > > > > >> > make[3]: Nothing to be done for `all-am'.
> > > > > > >> > make[3]: Leaving directory
> > `/home/proxima/mesos/build/3rdparty'
> > > > > > >> > make[2]: Leaving directory
> > `/home/proxima/mesos/build/3rdparty'
> > > > > > >> > make[1]: Leaving directory
> > `/home/proxima/mesos/build/3rdparty'
> > > > > > >> > Making all in src
> > > > > > >> > make[1]: Entering directory `/home/proxima/mesos/build/src'
> > > > > > >> > make[1]: *** No rule to make target `all'.  Stop.
> > > > > > >> > make[1]: Leaving directory `/home/proxima/mesos/build/src'
> > > > > > >> > make: *** [all-recursive] Error 1
> > > > > > >> >
> > > > > > >> > *Sweta Rani*
> > > > > > >> >
> > > > > > >>
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>

Reply via email to