Alex,
Done with master but unable to run slave using command "./bin/mesos-slave.sh
--master=127.0.0.1:5050"
Also the port 5051 is allocated with random work '-'. See this:
proxima@proxima:~/mesos/build$ netstat -ltnp | grep ':5051'
(Not all processes could be identified, non-owned process info
will not be shown, you would have to be root to see it all.)
tcp 0 0 0.0.0.0:5051 0.0.0.0:* LISTEN
-
proxima@proxima:~/mesos/build$ sudo kill -9 -
kill: failed to parse argument: '-'
proxima@proxima:~/mesos/build$ netstat -ltnp | grep ':5051'
(Not all processes could be identified, non-owned process info
will not be shown, you would have to be root to see it all.)
tcp 0 0 0.0.0.0:5051 0.0.0.0:* LISTEN
-
proxima@:~/mesos/build$ ./bin/mesos-slave.sh --master=127.0.0.1:5050
WARNING: Logging before InitGoogleLogging() is written to STDERR
F1106 19:51:22.737992 6367 process.cpp:1532] Failed to initialize, bind
0.0.0.0:5051: Address already in use [98]
*** Check failure stack trace: ***
Aborted (core dumped)
*Sweta Rani*
On Thu, Nov 6, 2014 at 7:07 PM, Alex Rukletsov <a...@mesosphere.io> wrote:
> Sweta,
>
> have you tried another port?
>
> On Thu, Nov 6, 2014 at 2:24 PM, Sweta Rani <swetarani3...@gmail.com>
> wrote:
>
> > Joris
> >
> > Done with above commands, but now it gives following error:
> > WARNING: Logging before InitGoogleLogging() is written to STDERR
> > F1106 18:50:48.117947 9706 process.cpp:1532] Failed to initialize, bind
> > 127.0.0.1:5050: Address already in use [98]
> > *** Check failure stack trace: ***
> >
> > I tried to solve it by
> >
> >
> http://stackoverflow.com/questions/10745878/ubuntu-error-with-apache-98address-already-in-use
> > but it didnt work for me.
> >
> >
> > *Sweta Rani*
> >
> > On Wed, Nov 5, 2014 at 3:50 AM, Joris Van Remoortere <
> jo...@mesosphere.io>
> > wrote:
> >
> > > You need to make the directory and set the permissions to the user you
> > are
> > > running the master as.
> > >
> > > For example:
> > >
> > > sudo mkdir /var/lib/mesos
> > > sudo chown jmlvanre /var/lib/mesos
> > >
> > > [jmlvanre] <run mesos master...>
> > >
> > > On Tue, Nov 4, 2014 at 2:07 PM, Sweta Rani <swetarani3...@gmail.com>
> > > wrote:
> > >
> > > > Thanks for your help. I have installed mesos but unable to start
> mesos
> > > > master by the command
> > > > "./bin/mesos-master.sh --ip=127.0.0.1 --work_dir=/var/lib/mesos".
> > > >
> > > > The file exists as "mesos-master.sh.in" in the bin folder.
> > > >
> > > > It reports:
> > > > Failed to create work directory '/var/lib/mesos': Permission denied
> > > >
> > > > *Sweta Rani*
> > > >
> > > > On Tue, Nov 4, 2014 at 2:50 PM, Adam Bordelon <a...@mesosphere.io>
> > > wrote:
> > > >
> > > > > As an alternate workaround, if you don't need the Java support
> > (you're
> > > > not
> > > > > running a JVM framework like Spark/Hadoop/Marathon), then you could
> > use
> > > > > `configure --disable-java` to skip all the maven/pom build steps.
> > > > >
> > > > > By disabling Java, you could at least check that the rest of Mesos
> > > builds
> > > > > and runs fine, which would still work with C++, Python, or Go
> > > frameworks,
> > > > > or even any Java frameworks using the pure Java bindings (jesos).
> > > > >
> > > > > On Mon, Nov 3, 2014 at 2:01 PM, Joris Van Remoortere <
> > > > jo...@mesosphere.io>
> > > > > wrote:
> > > > >
> > > > > > Did you verify that the settings.xml file was parsed using mvn
> -X?
> > > > > >
> > > > > > Specifically after the first few lines you will see something
> along
> > > the
> > > > > > lines of:
> > > > > > [DEBUG] Reading global settings from
> > > /usr/share/maven/conf/settings.xml
> > > > > > [DEBUG] Reading user settings from /home/abc/.m2/settings.xml
> > > > > > [DEBUG] Using local repository at /home/abc/.m2/repository
> > > > > >
> > > > > > Make sure your settings file is in the right location.
> > > > > >
> > > > > > On Mon, Nov 3, 2014 at 11:51 AM, Sweta Rani <
> > swetarani3...@gmail.com
> > > >
> > > > > > wrote:
> > > > > >
> > > > > > > I use campus proxy configuration for internet. But I am unable
> to
> > > run
> > > > > > make
> > > > > > > in installing Mesos on my Ubuntu -14.04, as it ends up with
> > > ERROR(1).
> > > > > > Upon
> > > > > > > searching, I created settings.xml file inside .m2 with the
> > required
> > > > > > > configuration but failed again. Please help me out, as it is
> > > greatly
> > > > > > > hindering me from my work.
> > > > > > >
> > > > > > > On Sat Nov 01 2014 at 3:38:57 AM Joris Van Remoortere <
> > > > > > jo...@mesosphere.io
> > > > > > > >
> > > > > > > wrote:
> > > > > > >
> > > > > > > > I think this suggests you're fetching through a proxy:
> > > > > > > > *Proxy request sent, awaiting response... 200 OK*
> > > > > > > >
> > > > > > > > When I wget this is my output:
> > > > > > > > wget
> > http://repo.maven.apache.org/maven2/org/apache/apache/11/
> > > > > > > > apache-11.pom
> > > > > > > > --2014-10-31
> > > > > > > > <
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> http://repo.maven.apache.org/maven2/org/apache/apache/11/apache-11.pom--2014-10-31
> > > > > > > >
> > > > > > > > 15:05:32--
> > > > > > > >
> > > > >
> > http://repo.maven.apache.org/maven2/org/apache/apache/11/apache-11.pom
> > > > > > > > Resolving repo.maven.apache.org (repo.maven.apache.org)...
> > > > > > 23.235.47.215
> > > > > > > > Connecting to repo.maven.apache.org
> > > > > > > > (repo.maven.apache.org)|23.235.47.215|:80...
> > > > > > > > connected.
> > > > > > > > *HTTP request sent, awaiting response... 200 OK*
> > > > > > > >
> > > > > > > > I think you might need to set up your proxy along these
> lines:
> > > > > > > > http://maven.apache.org/guides/mini/guide-proxies.html ...
> > but I
> > > > am
> > > > > > not
> > > > > > > > familiar with Maven.
> > > > > > > >
> > > > > > > > Joris
> > > > > > > >
> > > > > > > >
> > > > > > > > On Fri, Oct 31, 2014 at 2:36 PM, Sweta Rani <
> > > > swetarani3...@gmail.com
> > > > > >
> > > > > > > > wrote:
> > > > > > > >
> > > > > > > > > Tried wget for all the given https, it was successful but
> > still
> > > > > after
> > > > > > > > that
> > > > > > > > > make was not successful and make check says "YOU HAVE 3
> > > DISABLED
> > > > > > TESTS"
> > > > > > > > >
> > > > > > > > > proxima@Centauri:~/mesos/build$ wget
> > > > > > > > >
> > > > > >
> > > http://repo.maven.apache.org/maven2/org/apache/apache/11/apache-11.pom
> > > > > > > > > --2014-11-01 02:55:51--
> > > > > > > > >
> > > > > >
> > > http://repo.maven.apache.org/maven2/org/apache/apache/11/apache-11.pom
> > > > > > > > > Connecting to 10.3.100.207:8080... connected.
> > > > > > > > > Proxy request sent, awaiting response... 200 OK
> > > > > > > > > Length: 14811 (14K) [text/xml]
> > > > > > > > > Saving to: ‘apache-11.pom’
> > > > > > > > >
> > > > > > > > > >> *Joris Van Remoortere*
> > > > > > > > >
> > > > > > > > > On Sat Nov 01 2014 at 2:36:27 AM Joris Van Remoortere <
> > > > > > > > jo...@mesosphere.io
> > > > > > > > > >
> > > > > > > > > wrote:
> > > > > > > > >
> > > > > > > > > > That seems like you might have a connectivity / firewall
> > > issue.
> > > > > > > > > > Can you try just doing a wget on that artifact?
> > > > > > > > > >
> > > > > > > > > > On Fri, Oct 31, 2014 at 1:56 PM, Sweta Rani <
> > > > > > swetarani3...@gmail.com
> > > > > > > >
> > > > > > > > > > wrote:
> > > > > > > > > >
> > > > > > > > > > > I tried it again but failed with following errors :
> > > > > > > > > > >
> > > > > > > > > > > make[1]: Entering directory
> > `/home/proxima/mesos/build/src'
> > > > > > > > > > > Building mesos-0.21.0.jar ...
> > > > > > > > > > > [INFO] Scanning for projects...
> > > > > > > > > > > Downloading:
> > > > > > > > > > >
> > http://repo.maven.apache.org/maven2/org/apache/apache/11/
> > > > > > > > apache-11.pom
> > > > > > > > > > > [ERROR] The build could not read 1 project -> [Help 1]
> > > > > > > > > > > [ERROR]
> > > > > > > > > > > [ERROR] The project org.apache.mesos:mesos:0.21.0
> > > > > > > > > > > (/home/proxima/mesos/build/src/java/mesos.pom) has 1
> > error
> > > > > > > > > > > [ERROR] Non-resolvable parent POM: Could not
> transfer
> > > > > > artifact
> > > > > > > > > > > org.apache:apache:pom:11 from/to central (
> > > > > > > > > > > http://repo.maven.apache.org/maven2): Connection to
> > > > > > > > > > > http://repo.maven.apache.org refused and
> > > > 'parent.relativePath'
> > > > > > > > points
> > > > > > > > > at
> > > > > > > > > > > wrong local POM @ line 18, column 11: Connection
> refused
> > ->
> > > > > [Help
> > > > > > > 2]
> > > > > > > > > > > [ERROR]
> > > > > > > > > > > [ERROR] To see the full stack trace of the errors,
> re-run
> > > > Maven
> > > > > > > with
> > > > > > > > > the
> > > > > > > > > > -e
> > > > > > > > > > > switch.
> > > > > > > > > > > [ERROR] Re-run Maven using the -X switch to enable full
> > > debug
> > > > > > > > logging.
> > > > > > > > > > > [ERROR]
> > > > > > > > > > > [ERROR] For more information about the errors and
> > possible
> > > > > > > solutions,
> > > > > > > > > > > please read the following articles:
> > > > > > > > > > > [ERROR] [Help 1]
> > > > > > > > > > >
> > > http://cwiki.apache.org/confluence/display/MAVEN/ProjectBuil
> > > > > > > > > > dingException
> > > > > > > > > > > [ERROR] [Help 2]
> > > > > > > > > > >
> > > http://cwiki.apache.org/confluence/display/MAVEN/Unresolvabl
> > > > > > > > > > eModelException
> > > > > > > > > > > make[1]: *** [java/target/mesos-0.21.0.jar] Error 1
> > > > > > > > > > > make[1]: Leaving directory
> > `/home/proxima/mesos/build/src'
> > > > > > > > > > > make: *** [all-recursive] Error 1
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > On Fri Oct 31 2014 at 1:09:15 PM Sweta Rani <
> > > > > > > swetarani3...@gmail.com
> > > > > > > > >
> > > > > > > > > > > wrote:
> > > > > > > > > > >
> > > > > > > > > > > > yaa.. followed the steps as directed in the
> > > documentation
> > > > > > > > > > > >
> > > > > > > > > > > > *Sweta Rani*
> > > > > > > > > > > > *3rd Year Undergraduate*
> > > > > > > > > > > > *Department of Electrical Engineering*
> > > > > > > > > > > > *IIT Kharagpur <http://www.iitkgp.ac.in/>*
> > > > > > > > > > > >
> > > > > > > > > > > > On Fri, Oct 31, 2014 at 3:14 AM, Dominic Hamon <
> > > > > > > > > > dha...@twopensource.com>
> > > > > > > > > > > > wrote:
> > > > > > > > > > > >
> > > > > > > > > > > >> Let's tackle the easy stuff: did you run bootstrap
> and
> > > > > > configure
> > > > > > > > as
> > > > > > > > > > per
> > > > > > > > > > > >> the
> > > > > > > > > > > >> getting started doc?
> > > > > > > > > > > >> On Oct 30, 2014 2:04 PM, "Sweta Rani" <
> > > > > > swetarani3...@gmail.com>
> > > > > > > > > > wrote:
> > > > > > > > > > > >>
> > > > > > > > > > > >> > Tried all the suggestions and tips given in JIRA
> and
> > > > > > different
> > > > > > > > > > google
> > > > > > > > > > > >> > forums but still the error remains same.
> > > > > > > > > > > >> >
> > > > > > > > > > > >> > Making all in .
> > > > > > > > > > > >> > make[1]: Entering directory
> > > `/home/proxima/mesos/build'
> > > > > > > > > > > >> > make[1]: Nothing to be done for `all-am'.
> > > > > > > > > > > >> > make[1]: Leaving directory
> > `/home/proxima/mesos/build'
> > > > > > > > > > > >> > Making all in 3rdparty
> > > > > > > > > > > >> > make[1]: Entering directory
> > > `/home/proxima/mesos/build/
> > > > > > > > 3rdparty'
> > > > > > > > > > > >> > make all-recursive
> > > > > > > > > > > >> > make[2]: Entering directory
> > > `/home/proxima/mesos/build/
> > > > > > > > 3rdparty'
> > > > > > > > > > > >> > Making all in libprocess
> > > > > > > > > > > >> > make[3]: Entering directory
> > > > > > > > > > > >> `/home/proxima/mesos/build/3rdparty/libprocess'
> > > > > > > > > > > >> > Making all in 3rdparty
> > > > > > > > > > > >> > make[4]: Entering directory
> > > > > > > > > > > >> >
> > > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty'
> > > > > > > > > > > >> > make all-recursive
> > > > > > > > > > > >> > make[5]: Entering directory
> > > > > > > > > > > >> >
> > > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty'
> > > > > > > > > > > >> > Making all in stout
> > > > > > > > > > > >> > make[6]: Entering directory
> > > > > > > > > > > >> >
> > > > > > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty/stout'
> > > > > > > > > > > >> > Making all in .
> > > > > > > > > > > >> > make[7]: Entering directory
> > > > > > > > > > > >> >
> > > > > > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty/stout'
> > > > > > > > > > > >> > make[7]: Nothing to be done for `all-am'.
> > > > > > > > > > > >> > make[7]: Leaving directory
> > > > > > > > > > > >> >
> > > > > > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty/stout'
> > > > > > > > > > > >> > Making all in include
> > > > > > > > > > > >> > make[7]: Entering directory
> > > > > > > > > > > >> >
> > > > > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty/stou
> > > > > > > > > > t/include'
> > > > > > > > > > > >> > make[7]: Nothing to be done for `all'.
> > > > > > > > > > > >> > make[7]: Leaving directory
> > > > > > > > > > > >> >
> > > > > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty/stou
> > > > > > > > > > t/include'
> > > > > > > > > > > >> > make[6]: Leaving directory
> > > > > > > > > > > >> >
> > > > > > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty/stout'
> > > > > > > > > > > >> > make[6]: Entering directory
> > > > > > > > > > > >> >
> > > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty'
> > > > > > > > > > > >> > make[6]: Nothing to be done for `all-am'.
> > > > > > > > > > > >> > make[6]: Leaving directory
> > > > > > > > > > > >> >
> > > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty'
> > > > > > > > > > > >> > make[5]: Leaving directory
> > > > > > > > > > > >> >
> > > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty'
> > > > > > > > > > > >> > make[4]: Leaving directory
> > > > > > > > > > > >> >
> > > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty'
> > > > > > > > > > > >> > Making all in .
> > > > > > > > > > > >> > make[4]: Entering directory
> > > > > > > > > > > >> `/home/proxima/mesos/build/3rdparty/libprocess'
> > > > > > > > > > > >> > make[4]: Nothing to be done for `all-am'.
> > > > > > > > > > > >> > make[4]: Leaving directory
> > > > > > > > > > > >> `/home/proxima/mesos/build/3rdparty/libprocess'
> > > > > > > > > > > >> > Making all in include
> > > > > > > > > > > >> > make[4]: Entering directory
> > > > > > > > > > > >> >
> > > `/home/proxima/mesos/build/3rdparty/libprocess/include'
> > > > > > > > > > > >> > make[4]: Nothing to be done for `all'.
> > > > > > > > > > > >> > make[4]: Leaving directory
> > > > > > > > > > > >> >
> > > `/home/proxima/mesos/build/3rdparty/libprocess/include'
> > > > > > > > > > > >> > make[3]: Leaving directory
> > > > > > > > > > > >> `/home/proxima/mesos/build/3rdparty/libprocess'
> > > > > > > > > > > >> > make[3]: Entering directory
> > > `/home/proxima/mesos/build/
> > > > > > > > 3rdparty'
> > > > > > > > > > > >> > make[3]: Nothing to be done for `all-am'.
> > > > > > > > > > > >> > make[3]: Leaving directory
> > > > > > > `/home/proxima/mesos/build/3rdparty'
> > > > > > > > > > > >> > make[2]: Leaving directory
> > > > > > > `/home/proxima/mesos/build/3rdparty'
> > > > > > > > > > > >> > make[1]: Leaving directory
> > > > > > > `/home/proxima/mesos/build/3rdparty'
> > > > > > > > > > > >> > Making all in src
> > > > > > > > > > > >> > make[1]: Entering directory
> > > > > `/home/proxima/mesos/build/src'
> > > > > > > > > > > >> > make[1]: *** No rule to make target `all'. Stop.
> > > > > > > > > > > >> > make[1]: Leaving directory
> > > > `/home/proxima/mesos/build/src'
> > > > > > > > > > > >> > make: *** [all-recursive] Error 1
> > > > > > > > > > > >> >
> > > > > > > > > > > >> > *Sweta Rani*
> > > > > > > > > > > >> >
> > > > > > > > > > > >>
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
