Hi Matt and Jon,

FWIW, Metron with the MPack has been tested extensively on CentOS 7. Works
like a champ. The issue right now is that sensor install is a CentOS
6/Ansible proposition.

I haven't seen the issue with ES that you're experiencing, Matt. Is that in
a 1 Master 3 Data node ES config or something else?

-D...


On Wed, Dec 14, 2016 at 3:29 PM, Matt Foley <mfo...@hortonworks.com> wrote:

> I hope we will try to support Centos7. Many of my company’s customers are
> requiring new installs to use RHEL 7 or Centos 7 rather than 6.  In
> addition, we have the benefit that Centos 6 RPMs basically always run fine
> in Centos7 (barring heavy-duty low-level system manipulations that Metron,
> Kibana, and ES just don’t use), ES doesn’t distinguish between them, and
> Kibana install support for Centos7 is already in place in the Mpack.  And
> of course the Hadoop Stack runs fine in 7.
>
> For what it’s worth, I’ve been working with the Mpack installation on
> Centos7 for the last few weeks, and it works fine except for a persistent
> issue where the Elasticsearch service works fine if launched interactively
> but terminates immediately if launched with same arguments as a service.
> Hope to find the cause in the next couple days.  (If anyone knows why,
> would love to hear.  The daemonized launch scripts come from ES, not from
> Metron, so “should just work”.)
>
> Thanks,
> --Matt
>
> On 12/13/16, 6:46 PM, "zeo...@gmail.com" <zeo...@gmail.com> wrote:
>
>     For now, I'm not sure what the solution is, but I would think choosing
> one
>     specific list of required/supported software (including OS) and
> documenting
>     that thoroughly is the right start.  Something like what currently
> exists
>     for the vagrant side of things.
>
>     That said, long term I would love to see broader support and
> automatically
>     generating documentation derived from the code.  Isn't CentOS 6 still
>     preferred over 7?  That's what I've been working on solely for that
>     reason.
>
>     Jon
>
>     On Tue, Dec 13, 2016, 21:07 Matt Foley <ma...@apache.org> wrote:
>
>     > In my work on METRON-608, I’ve found a lot of small but significant
> bugs
>     > in the existing Mpack (version 0.3.0).  These bugs integrate with a
> lot of
>     > the oddball tweaks specified in the draft Install docs I saw.  I
> would like
>     > to submit a PR for these bugs, but they must be accompanied by
> changes in
>     > the Install doc.
>     >
>     > How do we want to manage this?  Should we version the Install doc?
> Or
>     > have multiple sections for the different versions?  Or have
> footnotes or
>     > sidebar comments about which version certain paragraphs do and do
> not apply
>     > to?
>     >
>     > I’m inclined to use sidebars within the document, because the
> dependencies
>     > aren’t just on which versions of HDP, Ambari, and Metron you use.
> They
>     > also depend on Python 2.6 vs 2.7, and Centos 6 vs 7.
>     >
>     > Thanks,
>     > --Matt
>     >
>     >
>     > On 12/13/16, 4:13 PM, "zeo...@gmail.com" <zeo...@gmail.com> wrote:
>     >
>     >     Sorry about the delay.  To be honest I delayed once I saw the
>     > management UI
>     >     PR because I was going to wait for that to be merged into master
>     > before I
>     >     did my mpack install.  My initial thought is that there may need
> to be
>     > some
>     >     sort of a merger between what you provided and the Hortonworks
> blog
>     > post,
>     >     as I would prefer a single, comprehensive post over
> fragmentation.
>     >
>     >     Jon
>     >
>     >     On Tue, Dec 13, 2016, 18:29 Dima Kovalyov <
> dima.koval...@sstech.us>
>     > wrote:
>     >
>     >     > Thank you Jon,
>     >     >
>     >     > Just wondering if you have finished polishing the document? I
> will
>     > have
>     >     > some time this week to polish and publish it if there is
> anything
>     > left
>     >     > to format.
>     >     >
>     >     > - Dima
>     >     >
>     >     > On 12/01/2016 04:41 PM, zeo...@gmail.com wrote:
>     >     > > While I can't delegate access to the wiki, I am working on
>     > migrating the
>     >     > > documentation over.  I have been modifying the document for
>     > clarity and
>     >     > > updating up some of the formatting, so please give me some
> time to
>     > do so.
>     >     > >
>     >     > > Jon
>     >     > >
>     >     > > On Thu, Dec 1, 2016 at 9:33 AM Dima Kovalyov <
>     > dima.koval...@sstech.us>
>     >     > > wrote:
>     >     > >
>     >     > >> Hello,
>     >     > >>
>     >     > >> Who can provide me with an access to add new page in this
>     > Installation
>     >     > >> space below?
>     >     > >> https://cwiki.apache.org/confluence/display/METRON/
> Installation
>     >     > >> I want to add up-to-date article on how-to install Metron
> using
>     > Ambari
>     >     > >> mpack.
>     >     > >> Please advise.
>     >     > >>
>     >     > >> My username is "dima" registered with electronic mail
> dimdroll
>     > hosted by
>     >     > >> gmail.
>     >     > >>
>     >     > >> Right now I have it posted here:
>     >     > >> https://goo.gl/HWGwpj
>     >     > >> But instead of maintaining it there it will be convenient
> for me
>     > to have
>     >     > >> it in confluence instead of gdocs as I am using confluence
> in our
>     >     > internal
>     >     > >> project as well, so I can basically copy formatted doc
> between
>     > each
>     >     > other.
>     >     > >>
>     >     > >> Thank you.
>     >     > >>
>     >     > >> - Dima
>     >     > >>
>     >     > >> On 11/30/2016 04:57 PM, zeo...@gmail.com<mailto:Zeolla
> @GMail.com>
>     >     > wrote:
>     >     > >> Probably the best long term place for this would be here<
>     >     > >> https://cwiki.apache.org/confluence/display/METRON/
> Installation>,
>     >     > >> potentially with a new mpack article (to differentiate from
> the
>     > ambari
>     >     > >> install which is already there, but dated).  I can help with
>     > migrating
>     >     > it
>     >     > >> to the wiki - I will run through your documentation later
> today
>     > and
>     >     > request
>     >     > >> edit permissions if I find anything worth updating.
>     >     > >>
>     >     > >> Would you be OK if I put your doc in the wiki at some point?
>     >     > >>
>     >     > >> Jon
>     >     > >>
>     >     > >> On Wed, Nov 30, 2016 at 9:51 AM Dima Kovalyov <
>     > dima.koval...@sstech.us
>     >     > >> <mailto:dima.koval...@sstech.us>> wrote:
>     >     > >> As multiple users asked I have published document for
> installing
>     > Metron
>     >     > on
>     >     > >> Centos 6 using Ambari 2.4 with HDP 2.5:
>     >     > >> https://goo.gl/HWGwpj
>     >     > >> It may look ugly as this is direct export from internal
>     > confluence with
>     >     > >> cosmetic changes and our internal details removed. Let me
> know if
>     > there
>     >     > is
>     >     > >> a better place to publish it.
>     >     > >>
>     >     > >> Feel free to request edit permissions, I would like the
> document
>     > to be
>     >     > >> up-to-date, simplified and corrected if there are any
> errors. The
>     > goal
>     >     > for
>     >     > >> this document is to provide installation guidance in a
> manner
>     > that Linux
>     >     > >> administrator with basic knowledge could perform
> installation
>     > without
>     >     > >> opening any other links or searching for commands, step by
> step.
>     >     > >> Thank you.
>     >     > >>
>     >     > >> p.s. feel free to let me know if you will encounter any
> errors as
>     > I've
>     >     > >> seen them bunch.
>     >     > >>
>     >     > >> - Dima
>     >     > >>
>     >     > >>
>     >     > >>
>     >     > >> On 11/30/2016 04:45 PM, zeo...@gmail.com<mailto:Zeolla
> @GMail.com>
>     >     > wrote:
>     >     > >> I also have written up a method to retrieve and setup the
> required
>     >     > >> packages in my script<
>     >     > >>
>     >     >
>     > https://github.com/JonZeolla/Development/blob/master/Bash/
> setupMetron.sh>
>     >     > >> which could probably be cleaned up and incorporated.
>     >     > >>
>     >     > >> Jon
>     >     > >>
>     >     > >> On Wed, Nov 30, 2016 at 9:24 AM Nick Allen <
> n...@nickallen.org
>     > <mailto:
>     >     > >> n...@nickallen.org>> wrote:
>     >     > >> In regards to your comment about a "full package version
> dump"
>     > there is
>     >     > at
>     >     > >> least a start at `metron-deployment/scripts/
> platform-info.sh`.
>     > If we
>     >     > can
>     >     > >> enhance that, let's do it.
>     >     > >>
>     >     > >> On Wed, Nov 30, 2016 at 4:04 AM, shoggi <sho...@gmail.com
> <mailto:
>     >     > >> sho...@gmail.com>> wrote:
>     >     > >> Hi
>     >     > >>
>     >     > >> Just to wrap this up. I've tried to deploy it on HDP 2.5
> but I
>     > got the
>     >     > >> exact same problem. What I did was removing all components
> for
>     > 2.4.3.0
>     >     > and
>     >     > >> then created a new cluster based on 2.5. I left it at that
> as the
>     > most
>     >     > >> likely issue could be with my base install. May that be
> wrong
>     > version of
>     >     > >> something or even a missing dev package.
>     >     > >>
>     >     > >> As my work also coincided with the announcement by Casey I
> went
>     > ahead
>     >     > and
>     >     > >> installed 0.3.0 as a dev installation instead. That worked
> great
>     > as the
>     >     > >> dev-full-platform guide is very complete.
>     >     > >>
>     >     > >> As a general feedback, in order to get more people
> interested and
>     > not
>     >     > >> having noobs like me come up with redundant questions - At
> this
>     > stage
>     >     > also
>     >     > >> sorry for not providing a meaningful subject, I simply was
> too
>     > excited
>     >     > :)
>     >     > >>
>     >     > >> There is much to win with a small extension of the
> installation
>     > guide. I
>     >     > >> don't think it needs much more prose around but a full
> package
>     > version
>     >     > dump
>     >     > >> with every new release would help greatly to get things
> going.
>     > For the
>     >     > >> things which need to be compiled in, the versioning
> information
>     > should
>     >     > be
>     >     > >> enough. I am saying this, as everyone starts with a
> different base
>     >     > system.
>     >     > >> Some have the chance to start from scratch, some have a
> system
>     > running
>     >     > and
>     >     > >> build something on top and then there are the experienced
> Metron
>     > users,
>     >     > who
>     >     > >> have many base requirements.. they tend to forget. And I
> believe
>     > at the
>     >     > end
>     >     > >> it always fails just because of some very tiny small
> difference.
>     >     > >>
>     >     > >> If there is a space somewhere available, this could even be
> a
>     > spot,
>     >     > where
>     >     > >> people can say, "hey, I got this running on XYZ and here is
> the
>     > package
>     >     > >> version dump". A simple table with 'Metron version', 'OS
> release',
>     >     > 'Package
>     >     > >> list file', 'Version Details of every other needed
> to-be-compiled
>     >     > package',
>     >     > >> is already a big help. This really could supplement the
> existing
>     > guide
>     >     > >> found here:
>     >     > >>
>     >     >
>     > https://cwiki.apache.org/confluence/display/METRON/
> Metron+Installation+on+an+Ambari-Managed+Cluster
>     >     > >> .
>     >     > >>
>     >     > >> But then, I could be alone and others did not experience
> the same
>     > and
>     >     > >> simply got it to run, I don't know. Anyway, I would be
> happy to
>     > help if
>     >     > >> help is needed.
>     >     > >>
>     >     > >> Cheers
>     >     > >> Shoggi
>     >     > >>
>     >     > >> On Sun, Nov 27, 2016 at 3:00 PM, shoggi <sho...@gmail.com
> <mailto:
>     >     > >> sho...@gmail.com>> wrote:
>     >     > >> Hi Simon
>     >     > >>
>     >     > >> Thank you for your very quick response. I installed it on
> HDP
>     > 2.4.3.0.
>     >     > >>
>     >     > >> I had a 0.2.0 instance running and was very conscious about
>     > versioning
>     >     > the
>     >     > >> various components. Somehow I had the understanding of not
>     > touching 2.5
>     >     > as
>     >     > >> of yet. I give that a try.
>     >     > >>
>     >     > >> Thanks heaps !
>     >     > >>
>     >     > >> Shoggi
>     >     > >>
>     >     > >> On Sun, Nov 27, 2016 at 2:52 PM, Simon Elliston Ball <
>     >     > >> si...@simonellistonball.com<mailto:simon@
> simonellistonball.com>>
>     > wrote:
>     >     > >> Hi Shoggi,
>     >     > >>
>     >     > >> Can I ask which version of HDP you used as a base. The
> article is
>     > a
>     >     > little
>     >     > >> out of date in that is calls for 2.4, which the 0.3.0
> release is
>     > based
>     >     > on
>     >     > >> 2.5. There was a major version difference in storm between
> the
>     > two,
>     >     > which
>     >     > >> seems likely to have caused the problem you're seeing.
>     >     > >>
>     >     > >> Simon
>     >     > >>
>     >     > >> Sent from my iPad
>     >     > >>
>     >     > >> On 27 Nov 2016, at 13:48, shoggi <sho...@gmail.com<mailto:
>     >     > sho...@gmail.com>>
>     >     > >> wrote:
>     >     > >>
>     >     > >> Hi all
>     >     > >>
>     >     > >> I followed the installation guide to deploy Metron via
> Ambari
>     >     > >>
>     >     >
>     > https://community.hortonworks.com/articles/60805/deploying-
> a-fresh-metron-cluster-using-ambari-serv.html
>     >     > >> .
>     >     > >>
>     >     > >> I ended up with all but the Metron Components (Enrichment,
>     > Parsing,
>     >     > >> Parsers) to start up. The closest to pinpoint the issue is,
> when
>     > I try
>     >     > to
>     >     > >> start any new parser topology such as with bro:
>     >     > >>
>     >     > >> /usr/metron/0.3.0/bin/start_parser_topology.sh -k
>     > x.localdomain:6667 -z
>     >     > >> x.localdomain:2181 -s bro
>     >     > >>
>     >     > >> The error I get is:
>     >     > >>
>     >     > >> Exception in thread "main" java.lang.BootstrapMethodError:
>     >     > >> java.lang.NoClassDefFoundError: org/apache/storm/Config
>     >     > >>
>     >     > >> Or in more details:
>     >     > >>
>     >     > >> Running: /usr/jdk64/jdk1.8.0_77/bin/java -client
> -Ddaemon.name=
>     >     > >> -Dstorm.options= -Dstorm.home=/usr/hdp/2.4.3.0-227/storm
>     >     > >> -Dstorm.log.dir=/var/log/storm
>     >     > >>
>     >     >
>     > -Djava.library.path=/usr/local/lib:/opt/local/lib:/usr/
> lib:/usr/hdp/current/storm-client/lib
>     >     > >> -Dstorm.conf.file= -cp
>     >     > >>
>     >     >
>     > /usr/hdp/2.4.3.0-227/storm/lib/asm-4.0.jar:/usr/hdp/2.4.
> 3.0-227/storm/lib/cheshire-5.3.1.jar:/usr/hdp/2.4.3.0-227/
> storm/lib/clj-stacktrace-0.2.7.jar:/usr/hdp/2.4.3.0-227/
> storm/lib/clj-time-0.8.0.jar:/usr/hdp/2.4.3.0-227/storm/lib/
> clojure-1.6.0.jar:/usr/hdp/
>     >     > >> 2.4.3.<http://2.4.3
>     >     > >>
>     >     >
>     > .>0-227/storm/lib/clout-1.0.1.jar:/usr/hdp/2.4.3.0-227/
> storm/lib/commons-codec-1.6.jar:/usr/hdp/2.4.3.0-227/
> storm/lib/compojure-1.1.3.jar:/usr/hdp/2.4.3.0-227/storm/
> lib/core.incubator-0.1.0.jar:/usr/hdp/2.4.3.0-227/storm/lib/
> disruptor-2.10.1.jar:/usr/hdp/2.4.3.0-227/storm/lib/
> gmetric4j-1.0.7.jar:/usr/hdp/2.4.3.0-227/storm/lib/hadoop-
> auth-2.7.1.2.4.3.0-227.jar:/usr/hdp/
>     >     > >> 2.4.3.<http://2.4.3
>     >     > >>
>     >     >
>     > .>0-227/storm/lib/hiccup-0.3.6.jar:/usr/hdp/2.4.3.0-227/
> storm/lib/jackson-core-2.3.1.jar:/usr/hdp/
>     >     > >> 2.4.3.<http://2.4.3
>     >     > >>
>     >     >
>     > .>0-227/storm/lib/jackson-dataformat-smile-2.3.1.jar:/
> usr/hdp/2.4.3.0-227/storm/lib/java.classpath-0.2.2.jar:/usr/
> hdp/2.4.3.0-227/storm/lib/javax.servlet-2.5.0.
> v201103041518.jar:/usr/hdp/2.4.3.0-227/storm/lib/jline-0.9.
> 94.jar:/usr/hdp/2.4.3.0-227/storm/lib/kryo-2.21.jar:/usr/hdp/
>     >     > >> 2.4.3.<http://2.4.3
>     >     > >>
>     >     >
>     > .>0-227/storm/lib/log4j-api-2.1.jar:/usr/hdp/2.4.3.0-227/
> storm/lib/log4j-core-2.1.jar:/usr/hdp/2.4.3.0-227/storm/lib/
> log4j-over-slf4j-1.6.6.jar:/usr/hdp/2.4.3.0-227/storm/lib/
> log4j-slf4j-impl-2.1.jar:/usr/hdp/2.4.3.0-227/storm/lib/
> minlog-1.2.jar:/usr/hdp/
>     >     > >> 2.4.3.<http://2.4.3
>     >     >
>     > .>0-227/storm/lib/ns-tracker-0.2.2.jar:/usr/hdp/2.4.3.0-
> 227/storm/lib/oncrpc-1.0.7.jar:/usr/hdp/2.4.3.0-227/
> storm/lib/reflectasm-1.07-shaded.jar:/usr/hdp/2.4.3.0-
> 227/storm/lib/ring-core-1.1.5.jar:/usr/hdp/2.4.3.0-227/
> storm/lib/ring-devel-1.3.0.jar:/usr/hdp/2.4.3.0-227/
> storm/lib/ring-jetty-adapter-1.3.0.jar:/usr/hdp/2.4.3.0-
> 227/storm/lib/ring-json-0.3.1.jar:/usr/hdp/2.4.3.0-227/
> storm/lib/ring-servlet-1.3.0.jar:/usr/hdp/2.4.3.0-227/
> storm/lib/servlet-api-2.5.jar:/usr/hdp/2.4.3.0-227/storm/
> lib/slf4j-api-1.7.7.jar:/usr/hdp/2.4.3.0-227/storm/lib/
> storm-core-0.10.0.2.4.3.0-227.jar:/usr/hdp/2.4.3.0-227/
> storm/lib/tigris-0.1.1.jar:/usr/hdp/2.4.3.0-227/storm/lib/
> tools.logging-0.2.3.jar:/usr/hdp/2.4.3.0-227/storm/lib/
> tools.namespace-0.2.4.jar:/usr/hdp/2.4.3.0-227/storm/lib/
> zookeeper.jar:/usr/metron/0.3.0/lib/metron-parsers-0.3.0-
> uber.jar:/usr/hdp/current/storm-supervisor/conf:/usr/
> hdp/2.4.3.0-227/storm/bin
>     >     > >> -Dstorm.jar=/usr/metron/0.3.0/
> lib/metron-parsers-0.3.0-uber.jar
>     >     > >> org.apache.metron.parsers.topology.ParserTopologyCLI -k
>     >     > x.localdomain:6667
>     >     > >> -z x.localdomain:2181 -s bro
>     >     > >> Exception in thread "main" java.lang.BootstrapMethodError:
>     >     > >> java.lang.NoClassDefFoundError: org/apache/storm/Config
>     >     > >> at
>     >     > >>
>     >     >
>     > org.apache.metron.parsers.topology.ParserTopologyCLI$
> ParserOptions.<init>(ParserTopologyCLI.java:199)
>     >     > >> at
>     >     > >>
>     >     >
>     > org.apache.metron.parsers.topology.ParserTopologyCLI$
> ParserOptions.<clinit>(ParserTopologyCLI.java:47)
>     >     > >> at
>     >     > >>
>     >     >
>     > org.apache.metron.parsers.topology.ParserTopologyCLI.
> main(ParserTopologyCLI.java:266)
>     >     > >> Caused by: java.lang.NoClassDefFoundError:
> org/apache/storm/Config
>     >     > >> ... 3 more
>     >     > >> Caused by: java.lang.ClassNotFoundException:
>     > org.apache.storm.Config
>     >     > >> at java.net.URLClassLoader.findClass(URLClassLoader.java:
> 381)
>     >     > >> at java.lang.ClassLoader.loadClass(ClassLoader.java:424)
>     >     > >> at sun.misc.Launcher$AppClassLoader.loadClass(
> Launcher.java:331)
>     >     > >> at java.lang.ClassLoader.loadClass(ClassLoader.java:357)
>     >     > >> ... 3 more
>     >     > >>
>     >     > >> Must be something wrong with my config, possibly I have
> overlooked
>     >     > >> something but can't put my finger on it. Any help is
> appreciated.
>     >     > >>
>     >     > >> Many thanks
>     >     > >> Shoggi
>     >     > >>
>     >     > >>
>     >     > >>
>     >     > >>
>     >     > >>
>     >     > >> --
>     >     > >> Nick Allen <n...@nickallen.org<mailto:n...@nickallen.org>>
>     >     > >> --
>     >     > >>
>     >     > >> Jon
>     >     > >>
>     >     > >> Sent from my mobile device
>     >     > >>
>     >     > >> --
>     >     > >>
>     >     > >> Jon
>     >     > >>
>     >     > >> Sent from my mobile device
>     >     > >>
>     >     > >> --
>     >     > > Jon
>     >     > >
>     >     > > Sent from my mobile device
>     >     > >
>     >     >
>     >     > --
>     >
>     >     Jon
>     >
>     >     Sent from my mobile device
>     >
>     >
>     >
>     > --
>
>     Jon
>
>     Sent from my mobile device
>
>
>

Reply via email to