David,
No, it’s in my METRON-608 single-node deployment  :-)

On 12/14/16, 12:46 PM, "David Lyle" <dlyle65...@gmail.com> wrote:

    Hi Matt and Jon,
    
    FWIW, Metron with the MPack has been tested extensively on CentOS 7. Works
    like a champ. The issue right now is that sensor install is a CentOS
    6/Ansible proposition.
    
    I haven't seen the issue with ES that you're experiencing, Matt. Is that in
    a 1 Master 3 Data node ES config or something else?
    
    -D...
    
    
    On Wed, Dec 14, 2016 at 3:29 PM, Matt Foley <mfo...@hortonworks.com> wrote:
    
    > I hope we will try to support Centos7. Many of my company’s customers are
    > requiring new installs to use RHEL 7 or Centos 7 rather than 6.  In
    > addition, we have the benefit that Centos 6 RPMs basically always run fine
    > in Centos7 (barring heavy-duty low-level system manipulations that Metron,
    > Kibana, and ES just don’t use), ES doesn’t distinguish between them, and
    > Kibana install support for Centos7 is already in place in the Mpack.  And
    > of course the Hadoop Stack runs fine in 7.
    >
    > For what it’s worth, I’ve been working with the Mpack installation on
    > Centos7 for the last few weeks, and it works fine except for a persistent
    > issue where the Elasticsearch service works fine if launched interactively
    > but terminates immediately if launched with same arguments as a service.
    > Hope to find the cause in the next couple days.  (If anyone knows why,
    > would love to hear.  The daemonized launch scripts come from ES, not from
    > Metron, so “should just work”.)
    >
    > Thanks,
    > --Matt
    >
    > On 12/13/16, 6:46 PM, "zeo...@gmail.com" <zeo...@gmail.com> wrote:
    >
    >     For now, I'm not sure what the solution is, but I would think choosing
    > one
    >     specific list of required/supported software (including OS) and
    > documenting
    >     that thoroughly is the right start.  Something like what currently
    > exists
    >     for the vagrant side of things.
    >
    >     That said, long term I would love to see broader support and
    > automatically
    >     generating documentation derived from the code.  Isn't CentOS 6 still
    >     preferred over 7?  That's what I've been working on solely for that
    >     reason.
    >
    >     Jon
    >
    >     On Tue, Dec 13, 2016, 21:07 Matt Foley <ma...@apache.org> wrote:
    >
    >     > In my work on METRON-608, I’ve found a lot of small but significant
    > bugs
    >     > in the existing Mpack (version 0.3.0).  These bugs integrate with a
    > lot of
    >     > the oddball tweaks specified in the draft Install docs I saw.  I
    > would like
    >     > to submit a PR for these bugs, but they must be accompanied by
    > changes in
    >     > the Install doc.
    >     >
    >     > How do we want to manage this?  Should we version the Install doc?
    > Or
    >     > have multiple sections for the different versions?  Or have
    > footnotes or
    >     > sidebar comments about which version certain paragraphs do and do
    > not apply
    >     > to?
    >     >
    >     > I’m inclined to use sidebars within the document, because the
    > dependencies
    >     > aren’t just on which versions of HDP, Ambari, and Metron you use.
    > They
    >     > also depend on Python 2.6 vs 2.7, and Centos 6 vs 7.
    >     >
    >     > Thanks,
    >     > --Matt
    >     >
    >     >
    >     > On 12/13/16, 4:13 PM, "zeo...@gmail.com" <zeo...@gmail.com> wrote:
    >     >
    >     >     Sorry about the delay.  To be honest I delayed once I saw the
    >     > management UI
    >     >     PR because I was going to wait for that to be merged into master
    >     > before I
    >     >     did my mpack install.  My initial thought is that there may need
    > to be
    >     > some
    >     >     sort of a merger between what you provided and the Hortonworks
    > blog
    >     > post,
    >     >     as I would prefer a single, comprehensive post over
    > fragmentation.
    >     >
    >     >     Jon
    >     >
    >     >     On Tue, Dec 13, 2016, 18:29 Dima Kovalyov <
    > dima.koval...@sstech.us>
    >     > wrote:
    >     >
    >     >     > Thank you Jon,
    >     >     >
    >     >     > Just wondering if you have finished polishing the document? I
    > will
    >     > have
    >     >     > some time this week to polish and publish it if there is
    > anything
    >     > left
    >     >     > to format.
    >     >     >
    >     >     > - Dima
    >     >     >
    >     >     > On 12/01/2016 04:41 PM, zeo...@gmail.com wrote:
    >     >     > > While I can't delegate access to the wiki, I am working on
    >     > migrating the
    >     >     > > documentation over.  I have been modifying the document for
    >     > clarity and
    >     >     > > updating up some of the formatting, so please give me some
    > time to
    >     > do so.
    >     >     > >
    >     >     > > Jon
    >     >     > >
    >     >     > > On Thu, Dec 1, 2016 at 9:33 AM Dima Kovalyov <
    >     > dima.koval...@sstech.us>
    >     >     > > wrote:
    >     >     > >
    >     >     > >> Hello,
    >     >     > >>
    >     >     > >> Who can provide me with an access to add new page in this
    >     > Installation
    >     >     > >> space below?
    >     >     > >> https://cwiki.apache.org/confluence/display/METRON/
    > Installation
    >     >     > >> I want to add up-to-date article on how-to install Metron
    > using
    >     > Ambari
    >     >     > >> mpack.
    >     >     > >> Please advise.
    >     >     > >>
    >     >     > >> My username is "dima" registered with electronic mail
    > dimdroll
    >     > hosted by
    >     >     > >> gmail.
    >     >     > >>
    >     >     > >> Right now I have it posted here:
    >     >     > >> https://goo.gl/HWGwpj
    >     >     > >> But instead of maintaining it there it will be convenient
    > for me
    >     > to have
    >     >     > >> it in confluence instead of gdocs as I am using confluence
    > in our
    >     >     > internal
    >     >     > >> project as well, so I can basically copy formatted doc
    > between
    >     > each
    >     >     > other.
    >     >     > >>
    >     >     > >> Thank you.
    >     >     > >>
    >     >     > >> - Dima
    >     >     > >>
    >     >     > >> On 11/30/2016 04:57 PM, zeo...@gmail.com<mailto:Zeolla
    > @GMail.com>
    >     >     > wrote:
    >     >     > >> Probably the best long term place for this would be here<
    >     >     > >> https://cwiki.apache.org/confluence/display/METRON/
    > Installation>,
    >     >     > >> potentially with a new mpack article (to differentiate from
    > the
    >     > ambari
    >     >     > >> install which is already there, but dated).  I can help 
with
    >     > migrating
    >     >     > it
    >     >     > >> to the wiki - I will run through your documentation later
    > today
    >     > and
    >     >     > request
    >     >     > >> edit permissions if I find anything worth updating.
    >     >     > >>
    >     >     > >> Would you be OK if I put your doc in the wiki at some 
point?
    >     >     > >>
    >     >     > >> Jon
    >     >     > >>
    >     >     > >> On Wed, Nov 30, 2016 at 9:51 AM Dima Kovalyov <
    >     > dima.koval...@sstech.us
    >     >     > >> <mailto:dima.koval...@sstech.us>> wrote:
    >     >     > >> As multiple users asked I have published document for
    > installing
    >     > Metron
    >     >     > on
    >     >     > >> Centos 6 using Ambari 2.4 with HDP 2.5:
    >     >     > >> https://goo.gl/HWGwpj
    >     >     > >> It may look ugly as this is direct export from internal
    >     > confluence with
    >     >     > >> cosmetic changes and our internal details removed. Let me
    > know if
    >     > there
    >     >     > is
    >     >     > >> a better place to publish it.
    >     >     > >>
    >     >     > >> Feel free to request edit permissions, I would like the
    > document
    >     > to be
    >     >     > >> up-to-date, simplified and corrected if there are any
    > errors. The
    >     > goal
    >     >     > for
    >     >     > >> this document is to provide installation guidance in a
    > manner
    >     > that Linux
    >     >     > >> administrator with basic knowledge could perform
    > installation
    >     > without
    >     >     > >> opening any other links or searching for commands, step by
    > step.
    >     >     > >> Thank you.
    >     >     > >>
    >     >     > >> p.s. feel free to let me know if you will encounter any
    > errors as
    >     > I've
    >     >     > >> seen them bunch.
    >     >     > >>
    >     >     > >> - Dima
    >     >     > >>
    >     >     > >>
    >     >     > >>
    >     >     > >> On 11/30/2016 04:45 PM, zeo...@gmail.com<mailto:Zeolla
    > @GMail.com>
    >     >     > wrote:
    >     >     > >> I also have written up a method to retrieve and setup the
    > required
    >     >     > >> packages in my script<
    >     >     > >>
    >     >     >
    >     > https://github.com/JonZeolla/Development/blob/master/Bash/
    > setupMetron.sh>
    >     >     > >> which could probably be cleaned up and incorporated.
    >     >     > >>
    >     >     > >> Jon
    >     >     > >>
    >     >     > >> On Wed, Nov 30, 2016 at 9:24 AM Nick Allen <
    > n...@nickallen.org
    >     > <mailto:
    >     >     > >> n...@nickallen.org>> wrote:
    >     >     > >> In regards to your comment about a "full package version
    > dump"
    >     > there is
    >     >     > at
    >     >     > >> least a start at `metron-deployment/scripts/
    > platform-info.sh`.
    >     > If we
    >     >     > can
    >     >     > >> enhance that, let's do it.
    >     >     > >>
    >     >     > >> On Wed, Nov 30, 2016 at 4:04 AM, shoggi <sho...@gmail.com
    > <mailto:
    >     >     > >> sho...@gmail.com>> wrote:
    >     >     > >> Hi
    >     >     > >>
    >     >     > >> Just to wrap this up. I've tried to deploy it on HDP 2.5
    > but I
    >     > got the
    >     >     > >> exact same problem. What I did was removing all components
    > for
    >     > 2.4.3.0
    >     >     > and
    >     >     > >> then created a new cluster based on 2.5. I left it at that
    > as the
    >     > most
    >     >     > >> likely issue could be with my base install. May that be
    > wrong
    >     > version of
    >     >     > >> something or even a missing dev package.
    >     >     > >>
    >     >     > >> As my work also coincided with the announcement by Casey I
    > went
    >     > ahead
    >     >     > and
    >     >     > >> installed 0.3.0 as a dev installation instead. That worked
    > great
    >     > as the
    >     >     > >> dev-full-platform guide is very complete.
    >     >     > >>
    >     >     > >> As a general feedback, in order to get more people
    > interested and
    >     > not
    >     >     > >> having noobs like me come up with redundant questions - At
    > this
    >     > stage
    >     >     > also
    >     >     > >> sorry for not providing a meaningful subject, I simply was
    > too
    >     > excited
    >     >     > :)
    >     >     > >>
    >     >     > >> There is much to win with a small extension of the
    > installation
    >     > guide. I
    >     >     > >> don't think it needs much more prose around but a full
    > package
    >     > version
    >     >     > dump
    >     >     > >> with every new release would help greatly to get things
    > going.
    >     > For the
    >     >     > >> things which need to be compiled in, the versioning
    > information
    >     > should
    >     >     > be
    >     >     > >> enough. I am saying this, as everyone starts with a
    > different base
    >     >     > system.
    >     >     > >> Some have the chance to start from scratch, some have a
    > system
    >     > running
    >     >     > and
    >     >     > >> build something on top and then there are the experienced
    > Metron
    >     > users,
    >     >     > who
    >     >     > >> have many base requirements.. they tend to forget. And I
    > believe
    >     > at the
    >     >     > end
    >     >     > >> it always fails just because of some very tiny small
    > difference.
    >     >     > >>
    >     >     > >> If there is a space somewhere available, this could even be
    > a
    >     > spot,
    >     >     > where
    >     >     > >> people can say, "hey, I got this running on XYZ and here is
    > the
    >     > package
    >     >     > >> version dump". A simple table with 'Metron version', 'OS
    > release',
    >     >     > 'Package
    >     >     > >> list file', 'Version Details of every other needed
    > to-be-compiled
    >     >     > package',
    >     >     > >> is already a big help. This really could supplement the
    > existing
    >     > guide
    >     >     > >> found here:
    >     >     > >>
    >     >     >
    >     > https://cwiki.apache.org/confluence/display/METRON/
    > Metron+Installation+on+an+Ambari-Managed+Cluster
    >     >     > >> .
    >     >     > >>
    >     >     > >> But then, I could be alone and others did not experience
    > the same
    >     > and
    >     >     > >> simply got it to run, I don't know. Anyway, I would be
    > happy to
    >     > help if
    >     >     > >> help is needed.
    >     >     > >>
    >     >     > >> Cheers
    >     >     > >> Shoggi
    >     >     > >>
    >     >     > >> On Sun, Nov 27, 2016 at 3:00 PM, shoggi <sho...@gmail.com
    > <mailto:
    >     >     > >> sho...@gmail.com>> wrote:
    >     >     > >> Hi Simon
    >     >     > >>
    >     >     > >> Thank you for your very quick response. I installed it on
    > HDP
    >     > 2.4.3.0.
    >     >     > >>
    >     >     > >> I had a 0.2.0 instance running and was very conscious about
    >     > versioning
    >     >     > the
    >     >     > >> various components. Somehow I had the understanding of not
    >     > touching 2.5
    >     >     > as
    >     >     > >> of yet. I give that a try.
    >     >     > >>
    >     >     > >> Thanks heaps !
    >     >     > >>
    >     >     > >> Shoggi
    >     >     > >>
    >     >     > >> On Sun, Nov 27, 2016 at 2:52 PM, Simon Elliston Ball <
    >     >     > >> si...@simonellistonball.com<mailto:simon@
    > simonellistonball.com>>
    >     > wrote:
    >     >     > >> Hi Shoggi,
    >     >     > >>
    >     >     > >> Can I ask which version of HDP you used as a base. The
    > article is
    >     > a
    >     >     > little
    >     >     > >> out of date in that is calls for 2.4, which the 0.3.0
    > release is
    >     > based
    >     >     > on
    >     >     > >> 2.5. There was a major version difference in storm between
    > the
    >     > two,
    >     >     > which
    >     >     > >> seems likely to have caused the problem you're seeing.
    >     >     > >>
    >     >     > >> Simon
    >     >     > >>
    >     >     > >> Sent from my iPad
    >     >     > >>
    >     >     > >> On 27 Nov 2016, at 13:48, shoggi <sho...@gmail.com<mailto:
    >     >     > sho...@gmail.com>>
    >     >     > >> wrote:
    >     >     > >>
    >     >     > >> Hi all
    >     >     > >>
    >     >     > >> I followed the installation guide to deploy Metron via
    > Ambari
    >     >     > >>
    >     >     >
    >     > https://community.hortonworks.com/articles/60805/deploying-
    > a-fresh-metron-cluster-using-ambari-serv.html
    >     >     > >> .
    >     >     > >>
    >     >     > >> I ended up with all but the Metron Components (Enrichment,
    >     > Parsing,
    >     >     > >> Parsers) to start up. The closest to pinpoint the issue is,
    > when
    >     > I try
    >     >     > to
    >     >     > >> start any new parser topology such as with bro:
    >     >     > >>
    >     >     > >> /usr/metron/0.3.0/bin/start_parser_topology.sh -k
    >     > x.localdomain:6667 -z
    >     >     > >> x.localdomain:2181 -s bro
    >     >     > >>
    >     >     > >> The error I get is:
    >     >     > >>
    >     >     > >> Exception in thread "main" java.lang.BootstrapMethodError:
    >     >     > >> java.lang.NoClassDefFoundError: org/apache/storm/Config
    >     >     > >>
    >     >     > >> Or in more details:
    >     >     > >>
    >     >     > >> Running: /usr/jdk64/jdk1.8.0_77/bin/java -client
    > -Ddaemon.name=
    >     >     > >> -Dstorm.options= -Dstorm.home=/usr/hdp/2.4.3.0-227/storm
    >     >     > >> -Dstorm.log.dir=/var/log/storm
    >     >     > >>
    >     >     >
    >     > -Djava.library.path=/usr/local/lib:/opt/local/lib:/usr/
    > lib:/usr/hdp/current/storm-client/lib
    >     >     > >> -Dstorm.conf.file= -cp
    >     >     > >>
    >     >     >
    >     > /usr/hdp/2.4.3.0-227/storm/lib/asm-4.0.jar:/usr/hdp/2.4.
    > 3.0-227/storm/lib/cheshire-5.3.1.jar:/usr/hdp/2.4.3.0-227/
    > storm/lib/clj-stacktrace-0.2.7.jar:/usr/hdp/2.4.3.0-227/
    > storm/lib/clj-time-0.8.0.jar:/usr/hdp/2.4.3.0-227/storm/lib/
    > clojure-1.6.0.jar:/usr/hdp/
    >     >     > >> 2.4.3.<http://2.4.3
    >     >     > >>
    >     >     >
    >     > .>0-227/storm/lib/clout-1.0.1.jar:/usr/hdp/2.4.3.0-227/
    > storm/lib/commons-codec-1.6.jar:/usr/hdp/2.4.3.0-227/
    > storm/lib/compojure-1.1.3.jar:/usr/hdp/2.4.3.0-227/storm/
    > lib/core.incubator-0.1.0.jar:/usr/hdp/2.4.3.0-227/storm/lib/
    > disruptor-2.10.1.jar:/usr/hdp/2.4.3.0-227/storm/lib/
    > gmetric4j-1.0.7.jar:/usr/hdp/2.4.3.0-227/storm/lib/hadoop-
    > auth-2.7.1.2.4.3.0-227.jar:/usr/hdp/
    >     >     > >> 2.4.3.<http://2.4.3
    >     >     > >>
    >     >     >
    >     > .>0-227/storm/lib/hiccup-0.3.6.jar:/usr/hdp/2.4.3.0-227/
    > storm/lib/jackson-core-2.3.1.jar:/usr/hdp/
    >     >     > >> 2.4.3.<http://2.4.3
    >     >     > >>
    >     >     >
    >     > .>0-227/storm/lib/jackson-dataformat-smile-2.3.1.jar:/
    > usr/hdp/2.4.3.0-227/storm/lib/java.classpath-0.2.2.jar:/usr/
    > hdp/2.4.3.0-227/storm/lib/javax.servlet-2.5.0.
    > v201103041518.jar:/usr/hdp/2.4.3.0-227/storm/lib/jline-0.9.
    > 94.jar:/usr/hdp/2.4.3.0-227/storm/lib/kryo-2.21.jar:/usr/hdp/
    >     >     > >> 2.4.3.<http://2.4.3
    >     >     > >>
    >     >     >
    >     > .>0-227/storm/lib/log4j-api-2.1.jar:/usr/hdp/2.4.3.0-227/
    > storm/lib/log4j-core-2.1.jar:/usr/hdp/2.4.3.0-227/storm/lib/
    > log4j-over-slf4j-1.6.6.jar:/usr/hdp/2.4.3.0-227/storm/lib/
    > log4j-slf4j-impl-2.1.jar:/usr/hdp/2.4.3.0-227/storm/lib/
    > minlog-1.2.jar:/usr/hdp/
    >     >     > >> 2.4.3.<http://2.4.3
    >     >     >
    >     > .>0-227/storm/lib/ns-tracker-0.2.2.jar:/usr/hdp/2.4.3.0-
    > 227/storm/lib/oncrpc-1.0.7.jar:/usr/hdp/2.4.3.0-227/
    > storm/lib/reflectasm-1.07-shaded.jar:/usr/hdp/2.4.3.0-
    > 227/storm/lib/ring-core-1.1.5.jar:/usr/hdp/2.4.3.0-227/
    > storm/lib/ring-devel-1.3.0.jar:/usr/hdp/2.4.3.0-227/
    > storm/lib/ring-jetty-adapter-1.3.0.jar:/usr/hdp/2.4.3.0-
    > 227/storm/lib/ring-json-0.3.1.jar:/usr/hdp/2.4.3.0-227/
    > storm/lib/ring-servlet-1.3.0.jar:/usr/hdp/2.4.3.0-227/
    > storm/lib/servlet-api-2.5.jar:/usr/hdp/2.4.3.0-227/storm/
    > lib/slf4j-api-1.7.7.jar:/usr/hdp/2.4.3.0-227/storm/lib/
    > storm-core-0.10.0.2.4.3.0-227.jar:/usr/hdp/2.4.3.0-227/
    > storm/lib/tigris-0.1.1.jar:/usr/hdp/2.4.3.0-227/storm/lib/
    > tools.logging-0.2.3.jar:/usr/hdp/2.4.3.0-227/storm/lib/
    > tools.namespace-0.2.4.jar:/usr/hdp/2.4.3.0-227/storm/lib/
    > zookeeper.jar:/usr/metron/0.3.0/lib/metron-parsers-0.3.0-
    > uber.jar:/usr/hdp/current/storm-supervisor/conf:/usr/
    > hdp/2.4.3.0-227/storm/bin
    >     >     > >> -Dstorm.jar=/usr/metron/0.3.0/
    > lib/metron-parsers-0.3.0-uber.jar
    >     >     > >> org.apache.metron.parsers.topology.ParserTopologyCLI -k
    >     >     > x.localdomain:6667
    >     >     > >> -z x.localdomain:2181 -s bro
    >     >     > >> Exception in thread "main" java.lang.BootstrapMethodError:
    >     >     > >> java.lang.NoClassDefFoundError: org/apache/storm/Config
    >     >     > >> at
    >     >     > >>
    >     >     >
    >     > org.apache.metron.parsers.topology.ParserTopologyCLI$
    > ParserOptions.<init>(ParserTopologyCLI.java:199)
    >     >     > >> at
    >     >     > >>
    >     >     >
    >     > org.apache.metron.parsers.topology.ParserTopologyCLI$
    > ParserOptions.<clinit>(ParserTopologyCLI.java:47)
    >     >     > >> at
    >     >     > >>
    >     >     >
    >     > org.apache.metron.parsers.topology.ParserTopologyCLI.
    > main(ParserTopologyCLI.java:266)
    >     >     > >> Caused by: java.lang.NoClassDefFoundError:
    > org/apache/storm/Config
    >     >     > >> ... 3 more
    >     >     > >> Caused by: java.lang.ClassNotFoundException:
    >     > org.apache.storm.Config
    >     >     > >> at java.net.URLClassLoader.findClass(URLClassLoader.java:
    > 381)
    >     >     > >> at java.lang.ClassLoader.loadClass(ClassLoader.java:424)
    >     >     > >> at sun.misc.Launcher$AppClassLoader.loadClass(
    > Launcher.java:331)
    >     >     > >> at java.lang.ClassLoader.loadClass(ClassLoader.java:357)
    >     >     > >> ... 3 more
    >     >     > >>
    >     >     > >> Must be something wrong with my config, possibly I have
    > overlooked
    >     >     > >> something but can't put my finger on it. Any help is
    > appreciated.
    >     >     > >>
    >     >     > >> Many thanks
    >     >     > >> Shoggi
    >     >     > >>
    >     >     > >>
    >     >     > >>
    >     >     > >>
    >     >     > >>
    >     >     > >> --
    >     >     > >> Nick Allen <n...@nickallen.org<mailto:n...@nickallen.org>>
    >     >     > >> --
    >     >     > >>
    >     >     > >> Jon
    >     >     > >>
    >     >     > >> Sent from my mobile device
    >     >     > >>
    >     >     > >> --
    >     >     > >>
    >     >     > >> Jon
    >     >     > >>
    >     >     > >> Sent from my mobile device
    >     >     > >>
    >     >     > >> --
    >     >     > > Jon
    >     >     > >
    >     >     > > Sent from my mobile device
    >     >     > >
    >     >     >
    >     >     > --
    >     >
    >     >     Jon
    >     >
    >     >     Sent from my mobile device
    >     >
    >     >
    >     >
    >     > --
    >
    >     Jon
    >
    >     Sent from my mobile device
    >
    >
    >
    

Reply via email to