Hi Alex, I guess the problem I am facing now to different to -
I am able to create a Install USB image successfully and also am able to install it on an HDD (I have a 20GB HDD). After installation when I remove the USB drive and try to boot the newly installed OS from the HDD the system hangs at boot time. By the way I can see the grub updated for the newly installed OS on the HDD. Regards, Nithish Mahalingam -----Original Message----- From: Lopatin, Alexander L Sent: Wednesday, August 06, 2008 12:18 AM To: Mahalingam, Nithish; dev@moblin.org Subject: RE: [Moblin Dev] Issue with 'Install USB'? Here is a week old posting: [Moblin Dev] Issue creating Install USB image with the latest MIC? I also ran yesterday into the same problem while creating an Install USB image for device with 2GB drive. One place to fix this is defaults.cfg file as Praj wrote, but also the MIC script platforms/common-apt/install.sh could be fixed the way it will stop and give the error message "Disk is too small to create boot, main/data, swap and fat32 partitions" in case when sum of boot_partition_size, swap__partition_size, and fat32_partition_size greater then the disk size. Thank you, Alex -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Prajwal Mohan Sent: Tuesday, July 29, 2008 02:00 To: Mahalingam, Nithish Cc: dev@moblin.org Subject: Re: [Moblin Dev] Issue creating Install USB image with the latest MIC? You can customize the boot partition and other partition size. To do this create a file ~/.image-creator/image-creator.cfg and use /usr/share/pdk/default_config/defaults.cfg as a template. Thanks, Praj Mahalingam, Nithish wrote: > Hi, > > > > Today I noticed that with the latest MIC I am not able to create working > "Install USB" image that would install successfully on the Menlow > platform. Here is what I tried - > > > > 1. I created a Menlow-lpia project and created a new target. > > 2. I included the Crownbeach-mobile-complete-stack FSET and inside > the terminal window I built a new 2.6.22 kernel for some experiment of > mine. > > 3. Created a "Install USB" image and burned it onto the USB > > 4. When I try to install this image on Menlow I am seeing an error > while the installer tries to copy the squashfs file system saying the cp > failed for root.img as there was no disk space. > > > > > > The HDD I am using a Seagate 80GB and I have installed Menlow > successfully with the previous version of MIC. By the way Live RW image > works fine without any issue. > > > > Now what I doubt is - I see that the installer tries to partition the > hard disk and then tries to copy the files to the appropriate partition; > now is the root.img file size exceeding the partition size? > > I must admit that with two kernels being built in my image and with the > kernel source for one of the Install USB kernels image size is ~1.1GB. > > > > Can someone help here? > > > > Regards, > > Nithish Mahalingam > > > -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mahalingam, Nithish Sent: Tuesday, August 05, 2008 11:43 To: dev@moblin.org Subject: [Moblin Dev] Issue with 'Install USB'? Hi, I have been trying to create an 'Install USB' image for menlow-lpia platform with moblin-crownbeach-full-mobile-stack FSET added and I am seeing an hang during OS boot after the OS installation completed on the HDD from the Install USB image. There is no issue when I boot the OS with an Live RW. Is there any issue with the Install USB image off-late? Regards, Nithish Mahalingam _______________________________________________ dev mailing list dev@moblin.org https://www.moblin.org/mailman/listinfo/dev _______________________________________________ dev mailing list dev@moblin.org https://www.moblin.org/mailman/listinfo/dev
