Hi Rusty,
At boot time I am seeing -
Begin: Waiting for root file system
Check root=bootarg cat /proc/cmdline
or missing modules, device: cat /proc/modules ls /dev
ALERT! /dev/hda1 does not exist. Dropping to shell!
(initramfs) .....
.......
/dev/hda1 does not exist??? Is that the problem?
Regards,
Nithish Mahalingam
-----Original Message-----
From: Lynch, Rusty
Sent: Wednesday, August 06, 2008 12:28 AM
To: Mahalingam, Nithish
Cc: Lopatin, Alexander L; dev@moblin.org
Subject: RE: [Moblin Dev] Issue with 'Install USB'?
Do you have any clue in the console? Any error messages?
On Wed, 2008-08-06 at 00:23 +0530, Mahalingam, Nithish wrote:
> Hi Alex,
>
> I guess the problem I am facing now to different to -
>
> I am able to create a Install USB image successfully and also am able
to
> install it on an HDD (I have a 20GB HDD). After installation when I
> remove the USB drive and try to boot the newly installed OS from the
HDD
> the system hangs at boot time. By the way I can see the grub updated
for
> the newly installed OS on the HDD.
>
>
> Regards,
> Nithish Mahalingam
>
>
> -----Original Message-----
> From: Lopatin, Alexander L
> Sent: Wednesday, August 06, 2008 12:18 AM
> To: Mahalingam, Nithish; dev@moblin.org
> Subject: RE: [Moblin Dev] Issue with 'Install USB'?
>
> Here is a week old posting: [Moblin Dev] Issue creating Install USB
> image with the latest MIC?
>
> I also ran yesterday into the same problem while creating an Install
USB
> image for device with 2GB drive.
>
> One place to fix this is defaults.cfg file as Praj wrote, but also the
> MIC script platforms/common-apt/install.sh could be fixed the way it
> will stop and give the error message "Disk is too small to create
boot,
> main/data, swap and fat32 partitions" in case when sum of
> boot_partition_size, swap__partition_size, and fat32_partition_size
> greater then the disk size.
>
> Thank you,
>
> Alex
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
> Of Prajwal Mohan
> Sent: Tuesday, July 29, 2008 02:00
> To: Mahalingam, Nithish
> Cc: dev@moblin.org
> Subject: Re: [Moblin Dev] Issue creating Install USB image with the
> latest MIC?
>
> You can customize the boot partition and other partition size. To do
> this create a file ~/.image-creator/image-creator.cfg and use
> /usr/share/pdk/default_config/defaults.cfg as a template.
> Thanks,
> Praj
>
>
> Mahalingam, Nithish wrote:
> > Hi,
> >
> >
> >
> > Today I noticed that with the latest MIC I am not able to create
> working
> > "Install USB" image that would install successfully on the Menlow
> > platform. Here is what I tried -
> >
> >
> >
> > 1. I created a Menlow-lpia project and created a new target.
> >
> > 2. I included the Crownbeach-mobile-complete-stack FSET and
> inside
> > the terminal window I built a new 2.6.22 kernel for some experiment
of
> > mine.
> >
> > 3. Created a "Install USB" image and burned it onto the USB
> >
> > 4. When I try to install this image on Menlow I am seeing an
> error
> > while the installer tries to copy the squashfs file system saying
the
> cp
> > failed for root.img as there was no disk space.
> >
> >
> >
> >
> >
> > The HDD I am using a Seagate 80GB and I have installed Menlow
> > successfully with the previous version of MIC. By the way Live RW
> image
> > works fine without any issue.
> >
> >
> >
> > Now what I doubt is - I see that the installer tries to partition
the
> > hard disk and then tries to copy the files to the appropriate
> partition;
> > now is the root.img file size exceeding the partition size?
> >
> > I must admit that with two kernels being built in my image and with
> the
> > kernel source for one of the Install USB kernels image size is
~1.1GB.
> >
> >
> >
> > Can someone help here?
> >
> >
> >
> > Regards,
> >
> > Nithish Mahalingam
> >
> >
> >
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
> Of Mahalingam, Nithish
> Sent: Tuesday, August 05, 2008 11:43
> To: dev@moblin.org
> Subject: [Moblin Dev] Issue with 'Install USB'?
>
> Hi,
>
>
>
> I have been trying to create an 'Install USB' image for menlow-lpia
> platform with moblin-crownbeach-full-mobile-stack FSET added and I am
> seeing an hang during OS boot after the OS installation completed on
the
> HDD from the Install USB image. There is no issue when I boot the OS
> with an Live RW. Is there any issue with the Install USB image
off-late?
>
>
>
> Regards,
>
> Nithish Mahalingam
>
> _______________________________________________
> dev mailing list
> dev@moblin.org
> https://www.moblin.org/mailman/listinfo/dev
>
> _______________________________________________
> dev mailing list
> dev@moblin.org
> https://www.moblin.org/mailman/listinfo/dev
_______________________________________________
dev mailing list
dev@moblin.org
https://www.moblin.org/mailman/listinfo/dev
