I see there is nothing about pulseaudio into my /etc/initrd.d
However when I look into the installed rpm's then it's telling me that
pulseaudio is installed:
r...@localhost ~]# rpm -qa | grep audio
alsa-plugins-pulseaudio-1.0.19-2.8.moblin2.i586
pulseaudio-0.9.14-1.36.moblin2.i586
pulseaudio-devel-0.9.14-1.36.moblin2.i586
[r...@localhost ~]#
When executing pulseaudio from the command line I get:
[r...@localhost ~]# pulseaudio
W: ltdl-bind-now.c: Failed to find original dlopen loader.
W: main.c: This program is not intended to be run as root (unless --
system is specified).
N: module-alsa-sink.c: Disabling timer-based scheduling because high-
resolution timers are not available from the kernel.
N: module-alsa-source.c: Disabling timer-based scheduling because high-
resolution timers are not available from the kernel.
W: alsa-util.c: Cannot find fallback mixer control "Mic".
Soft CPU time limit exhausted, terminating.
Hard CPU time limit exhausted, terminating forcibly.
Aborted (core dumped)
[r...@localhost ~]#
when I then look into my dmesg I have this:
[ 3526.986325] hda-intel: Invalid position buffer, using LPIB read
method instead.
[ 3526.987836] hda-intel: IRQ timing workaround is activated for card
#0. Suggest a bigger bdl_pos_adj.
Greetings PJ
On 06 Apr 2009, at 17:12, Zhang, Austin wrote:
Can you try to (re)launch pulseaudio daemon and run alsamixer again?
pulseaudio --start
You should see pulseaudio running on the backgroud.
-----Original Message-----
From: Peter-Jan Deweirdt [mailto:[email protected]]
Sent: 2009年4月6日 22:22
To: Zhang, Austin
Cc: Zhang, Vivian; [email protected]
Subject: Re: [Moblin Dev] puseaudio
Hi,
Well we are developing our own HW. We are using the Silverthorne and
the Poulsbo (400Mhz FSB)
This is what we have on /dev/snd
[r...@localhost ~]# ls /dev/snd/
controlC0 hwC0D0 pcmC0D0c pcmC0D0p seq timer
[r...@localhost ~]#
Also when I look if the pulseaudio is running I see this audio deamon
running:
[r...@localhost ~]# ps aux | grep audio
root 537 0.0 0.0 0 0 ? S< 20:00 0:00 [hd-
audio0]
root 1105 0.0 0.2 2136 604 pts/0 S+ 20:01 0:00 grep
audio
[r...@localhost ~]#
Regards Peter-Jan
On 06 Apr 2009, at 16:11, Zhang, Austin wrote:
No, of course.
Which platform are you using? menlow? mrst? What kind of device node
under /dev/snd do you have?
-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Peter-Jan Deweirdt
Sent: 2009年4月6日 22:05
To: Zhang, Vivian
Cc: [email protected]
Subject: Re: [Moblin Dev] puseaudio
Does that mean that when I'm logged-in as root the pulseaudio will
never start?
PJ
On 06 Apr 2009, at 16:00, Zhang, Vivian wrote:
Hi,
You can try #alsamixer under normal user like "moblin". It works
ok on my device. It seems that pa server can't be launched
successfully under root privilege on moblin.
Thanks.
-- vivian
-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Peter-Jan Deweirdt
Sent: 2009年4月6日 21:26
To: [email protected]
Subject: [Moblin Dev] puseaudio
Hi,
I'm trying to setup my audio on my device with moblin. I tried
before
with ubuntu and this looks fine. It looks like I get the pulseaudio
not to work on moblin
I don't really know what is happening so I'll need some help.
When I look into /dev I don't see anything that I can use for
playing
a audio file (no /dev/dsp /dev/audio)
When I try to start alsamixer I get the following error:
[r...@localhost ~]# alsamixer
ALSA lib pulse.c:272:(pulse_connect) PulseAudio: Unable to connect:
Connection refused
alsamixer: function snd_ctl_open failed for default: Connection
refused
Can please somebody help me?
Here is some output configuration
[r...@localhost ~]# lspci
00:00.0 Host bridge: Intel Corporation System Controller Hub (SCH
Poulsbo) (rev 06)
00:02.0 VGA compatible controller: Intel Corporation System
Controller
Hub (SCH Poulsbo) Graphics Controller (rev 06)
00:1b.0 Audio device: Intel Corporation System Controller Hub (SCH
Poulsbo) HD Audio Controller (rev 06)
00:1c.0 PCI bridge: Intel Corporation System Controller Hub (SCH
Poulsbo) PCI Express Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation System Controller Hub (SCH
Poulsbo) PCI Express Port 2 (rev 06)
00:1d.0 USB Controller: Intel Corporation System Controller Hub (SCH
Poulsbo) USB UHCI #1 (rev 06)
00:1d.1 USB Controller: Intel Corporation System Controller Hub (SCH
Poulsbo) USB UHCI #2 (rev 06)
00:1d.2 USB Controller: Intel Corporation System Controller Hub (SCH
Poulsbo) USB UHCI #3 (rev 06)
00:1d.7 USB Controller: Intel Corporation System Controller Hub (SCH
Poulsbo) USB EHCI #1 (rev 06)
00:1e.0 SD Host controller: Intel Corporation System Controller Hub
(SCH Poulsbo) SDIO Controller #1 (rev 06)
00:1e.1 SD Host controller: Intel Corporation System Controller Hub
(SCH Poulsbo) SDIO Controller #2 (rev 06)
00:1e.2 SD Host controller: Intel Corporation System Controller Hub
(SCH Poulsbo) SDIO Controller #3 (rev 06)
00:1f.0 ISA bridge: Intel Corporation System Controller Hub (SCH
Poulsbo) LPC Bridge (rev 06)
00:1f.1 IDE interface: Intel Corporation System Controller Hub (SCH
Poulsbo) IDE Controller (rev 06)
02:00.0 Ethernet controller: Intel Corporation Unknown device 10d3
03:00.0 Mass storage controller: Silicon Image, Inc. Sil 3531
[SATALink/SATARaid] Serial ATA Controller (rev 01)
[r...@localhost ~]# dmesg | grep 00:1b.0
[ 0.810108] pci 0000:00:1b.0: reg 10 64bit mmio:
[0xd0010000-0xd0013fff]
[ 0.810351] pci 0000:00:1b.0: PME# supported from D0 D3hot
[ 0.810378] pci 0000:00:1b.0: PME# disabled
[ 0.829266] pci 0000:00:1b.0: PCI->APIC IRQ transform: INT A ->
IRQ
22
[ 5.187216] HDA Intel 0000:00:1b.0: setting latency timer to 64
[r...@localhost ~]#
[r...@localhost ~]# cat /proc/asound/cards
0 [MID ]: HDA-Intel - HDA Intel MID
HDA Intel MID at 0xd0010000 irq 22
[r...@localhost ~]# cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.18a.
[r...@localhost ~]# ls /dev
MAKEDEV log random stdin tty22 tty39
tty55 usb usbmon4
block loop0 rtc stdout tty23 tty4
tty56 usbdev1.1_ep00 vcs
bsg loop1 rtc0 tty tty24 tty40
tty57 usbdev1.1_ep81 vcs1
bus loop2 sda tty0 tty25 tty41
tty58 usbdev2.1_ep00 vcs2
char loop3 sda1 tty1 tty26 tty42
tty59 usbdev2.1_ep81 vcs3
console loop4 sda2 tty10 tty27 tty43
tty6 usbdev3.1_ep00 vcs4
core loop5 sda3 tty11 tty28 tty44
tty60 usbdev3.1_ep81 vcs5
cpu loop6 sda4 tty12 tty29 tty45
tty61 usbdev4.1_ep00 vcs6
cpu_dma_latency loop7 sdb tty13 tty3 tty46
tty62 usbdev4.1_ep81 vcs8
dri mem sdb1 tty14 tty30 tty47
tty63 usbdev4.2_ep00 vcsa
fd net sdb2 tty15 tty31 tty48
tty7 usbdev4.2_ep81 vcsa1
full network_latency sdb3 tty16 tty32 tty49
tty8 usbdev4.2_ep82 vcsa2
hidraw0 network_throughput sdb4 tty17 tty33 tty5
tty9 usbdev4.3_ep00 vcsa3
hidraw1 null sg0 tty18 tty34 tty50
ttyS0 usbdev4.3_ep81 vcsa4
hidraw2 port shm tty19 tty35 tty51
ttyS1 usbmon0 vcsa5
initctl ppp snapshot tty2 tty36 tty52
ttyS2 usbmon1 vcsa6
input ptmx snd tty20 tty37 tty53
ttyS3 usbmon2 vcsa8
kmsg pts stderr tty21 tty38 tty54
urandom usbmon3 zero
[r...@localhost ~]#
_______________________________________________
Moblin dev Mailing List
[email protected]
To manage or unsubscribe from this mailing list visit:
https://lists.moblin.org/mailman/listinfo/dev or your user account
on http://moblin.org once logged in.
For more information on the Moblin Developer Mailing lists visit:
http://moblin.org/community/mailing-lists
_______________________________________________
Moblin dev Mailing List
[email protected]
To manage or unsubscribe from this mailing list visit:
https://lists.moblin.org/mailman/listinfo/dev or your user account
on http://moblin.org once logged in.
For more information on the Moblin Developer Mailing lists visit:
http://moblin.org/community/mailing-lists
_______________________________________________
Moblin dev Mailing List
[email protected]
To manage or unsubscribe from this mailing list visit:
https://lists.moblin.org/mailman/listinfo/dev or your user account on
http://moblin.org once logged in.
For more information on the Moblin Developer Mailing lists visit:
http://moblin.org/community/mailing-lists
