Not exactly sure the complain from the app. Which kernel are you using? Can you adopt the moblin's config (generic + menlow) and have a try?
-----Original Message----- From: Peter-Jan Deweirdt [mailto:[email protected]] Sent: 2009年4月6日 23:21 To: Zhang, Austin Cc: Zhang, Vivian; [email protected] Subject: Re: [Moblin Dev] puseaudio I see there is nothing about pulseaudio into my /etc/initrd.d However when I look into the installed rpm's then it's telling me that pulseaudio is installed: r...@localhost ~]# rpm -qa | grep audio alsa-plugins-pulseaudio-1.0.19-2.8.moblin2.i586 pulseaudio-0.9.14-1.36.moblin2.i586 pulseaudio-devel-0.9.14-1.36.moblin2.i586 [r...@localhost ~]# When executing pulseaudio from the command line I get: [r...@localhost ~]# pulseaudio W: ltdl-bind-now.c: Failed to find original dlopen loader. W: main.c: This program is not intended to be run as root (unless -- system is specified). N: module-alsa-sink.c: Disabling timer-based scheduling because high- resolution timers are not available from the kernel. N: module-alsa-source.c: Disabling timer-based scheduling because high- resolution timers are not available from the kernel. W: alsa-util.c: Cannot find fallback mixer control "Mic". Soft CPU time limit exhausted, terminating. Hard CPU time limit exhausted, terminating forcibly. Aborted (core dumped) [r...@localhost ~]# when I then look into my dmesg I have this: [ 3526.986325] hda-intel: Invalid position buffer, using LPIB read method instead. [ 3526.987836] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. Greetings PJ On 06 Apr 2009, at 17:12, Zhang, Austin wrote: > Can you try to (re)launch pulseaudio daemon and run alsamixer again? > pulseaudio --start > You should see pulseaudio running on the backgroud. > > -----Original Message----- > From: Peter-Jan Deweirdt [mailto:[email protected]] > Sent: 2009年4月6日 22:22 > To: Zhang, Austin > Cc: Zhang, Vivian; [email protected] > Subject: Re: [Moblin Dev] puseaudio > > Hi, > > Well we are developing our own HW. We are using the Silverthorne and > the Poulsbo (400Mhz FSB) > > This is what we have on /dev/snd > > [r...@localhost ~]# ls /dev/snd/ > controlC0 hwC0D0 pcmC0D0c pcmC0D0p seq timer > [r...@localhost ~]# > > > Also when I look if the pulseaudio is running I see this audio deamon > running: > [r...@localhost ~]# ps aux | grep audio > root 537 0.0 0.0 0 0 ? S< 20:00 0:00 [hd- > audio0] > root 1105 0.0 0.2 2136 604 pts/0 S+ 20:01 0:00 grep > audio > [r...@localhost ~]# > > > Regards Peter-Jan > > On 06 Apr 2009, at 16:11, Zhang, Austin wrote: > >> No, of course. >> >> Which platform are you using? menlow? mrst? What kind of device node >> under /dev/snd do you have? >> >> -----Original Message----- >> From: [email protected] [mailto:[email protected]] On >> Behalf Of Peter-Jan Deweirdt >> Sent: 2009年4月6日 22:05 >> To: Zhang, Vivian >> Cc: [email protected] >> Subject: Re: [Moblin Dev] puseaudio >> >> Does that mean that when I'm logged-in as root the pulseaudio will >> never start? >> >> PJ >> On 06 Apr 2009, at 16:00, Zhang, Vivian wrote: >> >>> Hi, >>> You can try #alsamixer under normal user like "moblin". It works >>> ok on my device. It seems that pa server can't be launched >>> successfully under root privilege on moblin. >>> >>> Thanks. >>> -- vivian >>> >>> -----Original Message----- >>> From: [email protected] [mailto:[email protected]] On >>> Behalf Of Peter-Jan Deweirdt >>> Sent: 2009年4月6日 21:26 >>> To: [email protected] >>> Subject: [Moblin Dev] puseaudio >>> >>> Hi, >>> >>> I'm trying to setup my audio on my device with moblin. I tried >>> before >>> with ubuntu and this looks fine. It looks like I get the pulseaudio >>> not to work on moblin >>> I don't really know what is happening so I'll need some help. >>> When I look into /dev I don't see anything that I can use for >>> playing >>> a audio file (no /dev/dsp /dev/audio) >>> >>> When I try to start alsamixer I get the following error: >>> [r...@localhost ~]# alsamixer >>> ALSA lib pulse.c:272:(pulse_connect) PulseAudio: Unable to connect: >>> Connection refused >>> >>> >>> alsamixer: function snd_ctl_open failed for default: Connection >>> refused >>> >>> >>> >>> Can please somebody help me? >>> >>> Here is some output configuration >>> >>> [r...@localhost ~]# lspci >>> 00:00.0 Host bridge: Intel Corporation System Controller Hub (SCH >>> Poulsbo) (rev 06) >>> 00:02.0 VGA compatible controller: Intel Corporation System >>> Controller >>> Hub (SCH Poulsbo) Graphics Controller (rev 06) >>> 00:1b.0 Audio device: Intel Corporation System Controller Hub (SCH >>> Poulsbo) HD Audio Controller (rev 06) >>> 00:1c.0 PCI bridge: Intel Corporation System Controller Hub (SCH >>> Poulsbo) PCI Express Port 1 (rev 06) >>> 00:1c.1 PCI bridge: Intel Corporation System Controller Hub (SCH >>> Poulsbo) PCI Express Port 2 (rev 06) >>> 00:1d.0 USB Controller: Intel Corporation System Controller Hub (SCH >>> Poulsbo) USB UHCI #1 (rev 06) >>> 00:1d.1 USB Controller: Intel Corporation System Controller Hub (SCH >>> Poulsbo) USB UHCI #2 (rev 06) >>> 00:1d.2 USB Controller: Intel Corporation System Controller Hub (SCH >>> Poulsbo) USB UHCI #3 (rev 06) >>> 00:1d.7 USB Controller: Intel Corporation System Controller Hub (SCH >>> Poulsbo) USB EHCI #1 (rev 06) >>> 00:1e.0 SD Host controller: Intel Corporation System Controller Hub >>> (SCH Poulsbo) SDIO Controller #1 (rev 06) >>> 00:1e.1 SD Host controller: Intel Corporation System Controller Hub >>> (SCH Poulsbo) SDIO Controller #2 (rev 06) >>> 00:1e.2 SD Host controller: Intel Corporation System Controller Hub >>> (SCH Poulsbo) SDIO Controller #3 (rev 06) >>> 00:1f.0 ISA bridge: Intel Corporation System Controller Hub (SCH >>> Poulsbo) LPC Bridge (rev 06) >>> 00:1f.1 IDE interface: Intel Corporation System Controller Hub (SCH >>> Poulsbo) IDE Controller (rev 06) >>> 02:00.0 Ethernet controller: Intel Corporation Unknown device 10d3 >>> 03:00.0 Mass storage controller: Silicon Image, Inc. Sil 3531 >>> [SATALink/SATARaid] Serial ATA Controller (rev 01) >>> >>> [r...@localhost ~]# dmesg | grep 00:1b.0 >>> [ 0.810108] pci 0000:00:1b.0: reg 10 64bit mmio: >>> [0xd0010000-0xd0013fff] >>> [ 0.810351] pci 0000:00:1b.0: PME# supported from D0 D3hot >>> [ 0.810378] pci 0000:00:1b.0: PME# disabled >>> [ 0.829266] pci 0000:00:1b.0: PCI->APIC IRQ transform: INT A -> >>> IRQ >>> 22 >>> [ 5.187216] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>> [r...@localhost ~]# >>> >>> >>> [r...@localhost ~]# cat /proc/asound/cards >>> 0 [MID ]: HDA-Intel - HDA Intel MID >>> HDA Intel MID at 0xd0010000 irq 22 >>> >>> [r...@localhost ~]# cat /proc/asound/version >>> Advanced Linux Sound Architecture Driver Version 1.0.18a. >>> >>> >>> [r...@localhost ~]# ls /dev >>> MAKEDEV log random stdin tty22 tty39 >>> tty55 usb usbmon4 >>> block loop0 rtc stdout tty23 tty4 >>> tty56 usbdev1.1_ep00 vcs >>> bsg loop1 rtc0 tty tty24 tty40 >>> tty57 usbdev1.1_ep81 vcs1 >>> bus loop2 sda tty0 tty25 tty41 >>> tty58 usbdev2.1_ep00 vcs2 >>> char loop3 sda1 tty1 tty26 tty42 >>> tty59 usbdev2.1_ep81 vcs3 >>> console loop4 sda2 tty10 tty27 tty43 >>> tty6 usbdev3.1_ep00 vcs4 >>> core loop5 sda3 tty11 tty28 tty44 >>> tty60 usbdev3.1_ep81 vcs5 >>> cpu loop6 sda4 tty12 tty29 tty45 >>> tty61 usbdev4.1_ep00 vcs6 >>> cpu_dma_latency loop7 sdb tty13 tty3 tty46 >>> tty62 usbdev4.1_ep81 vcs8 >>> dri mem sdb1 tty14 tty30 tty47 >>> tty63 usbdev4.2_ep00 vcsa >>> fd net sdb2 tty15 tty31 tty48 >>> tty7 usbdev4.2_ep81 vcsa1 >>> full network_latency sdb3 tty16 tty32 tty49 >>> tty8 usbdev4.2_ep82 vcsa2 >>> hidraw0 network_throughput sdb4 tty17 tty33 tty5 >>> tty9 usbdev4.3_ep00 vcsa3 >>> hidraw1 null sg0 tty18 tty34 tty50 >>> ttyS0 usbdev4.3_ep81 vcsa4 >>> hidraw2 port shm tty19 tty35 tty51 >>> ttyS1 usbmon0 vcsa5 >>> initctl ppp snapshot tty2 tty36 tty52 >>> ttyS2 usbmon1 vcsa6 >>> input ptmx snd tty20 tty37 tty53 >>> ttyS3 usbmon2 vcsa8 >>> kmsg pts stderr tty21 tty38 tty54 >>> urandom usbmon3 zero >>> [r...@localhost ~]# >>> >>> _______________________________________________ >>> Moblin dev Mailing List >>> [email protected] >>> >>> To manage or unsubscribe from this mailing list visit: >>> https://lists.moblin.org/mailman/listinfo/dev or your user account >>> on http://moblin.org once logged in. >>> >>> For more information on the Moblin Developer Mailing lists visit: >>> http://moblin.org/community/mailing-lists >> >> _______________________________________________ >> Moblin dev Mailing List >> [email protected] >> >> To manage or unsubscribe from this mailing list visit: >> https://lists.moblin.org/mailman/listinfo/dev or your user account >> on http://moblin.org once logged in. >> >> For more information on the Moblin Developer Mailing lists visit: >> http://moblin.org/community/mailing-lists > _______________________________________________ Moblin dev Mailing List [email protected] To manage or unsubscribe from this mailing list visit: https://lists.moblin.org/mailman/listinfo/dev or your user account on http://moblin.org once logged in. For more information on the Moblin Developer Mailing lists visit: http://moblin.org/community/mailing-lists
