Hi Aditya,
I suggest to hack around flash map instead of removing code.
I would do something like this (hopefully calculations are OK).
+++ b/hw/bsp/nrf52dk/bsp.yml
@@ -41,11 +41,11 @@ bsp.flash_map:
FLASH_AREA_IMAGE_0:
device: 0
offset: 0x00008000
- size: 232kB
+ size: 462kB
FLASH_AREA_IMAGE_1:
device: 0
- offset: 0x00042000
- size: 232kB
+ offset: 0x0007B800
+ size: 2kB
FLASH_AREA_IMAGE_SCRATCH:
device: 0
offset: 0x0007c000
diff --git a/hw/bsp/nrf52dk/nrf52xxaa.ld b/hw/bsp/nrf52dk/nrf52xxaa.ld
index 9433e37fd..55e293da1 100644
--- a/hw/bsp/nrf52dk/nrf52xxaa.ld
+++ b/hw/bsp/nrf52dk/nrf52xxaa.ld
@@ -17,7 +17,7 @@
*/
MEMORY
{
- FLASH (rx) : ORIGIN = 0x00008000, LENGTH = 0x3a000
+ FLASH (rx) : ORIGIN = 0x00008000, LENGTH = 0x73800
RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x10000
}
Make sure to rebuild boot and app and then try.
Best
Łukasz
On 19 April 2018 at 07:30, Aditya Xavier <[email protected]> wrote:
> Hi Łukasz,
>
> PFA the app I used to test Mesh using multi advertising instances.
>
> I get the following error.
> [ts=275343728ssb, mod=4 level=3] adv_send: Advertising failed: err 3
>
>
>
> I had to comment out a lot of code to get it in a flash-able size.
>
> Thanks,
> Aditya Xavier.
>
>
> On 18-Apr-2018, at 1:13 PM, Aditya Xavier <[email protected]> wrote:
>
> Hi Łukasz,
>
> Am using nrf52832, hence the problem of flash overflow.
>
> Would create a test app, using btshell + blemesh + the flags which you
> recommended, and test again.
>
> Thanks,
> Aditya Xavier.
>
> On 18-Apr-2018, at 12:29 PM, Łukasz Rymanowski <
> [email protected]> wrote:
>
> Hi Aditya,
>
> If there is flash overflow consider removing some features from the
> configuration.
> What HW are you using? We are running on nrf52840
>
> BTW There is no special application. It is btshell plus those 4 flags (
> BLE_EXT_ADV, BLE_MULTI_ADV_INSTANCES, BLE_MESH, BLE_MESH_SHELL) . Of
> course you need my PR. I did not test it personally, but I know it worked
> for Michal.
>
> Please share your target configuration,
>
> Best
> Łukasz
>
> On 17 April 2018 at 12:04, Aditya Xavier <[email protected] <mailto:
> [email protected] <[email protected]>>> wrote:
>
> Hi Łukasz,
>
> Been trying to join both blemesh_shell and bt_shell, but there is a
> problem of flash overflow.
>
> Created another app, which basically is btshell and some portions of
> blemesh, but that didn’t work.
>
> Is it possible for you to share a sample / test app ?
>
> Thanks,
> Aditya Xavier.
>
> On 10-Apr-2018, at 1:09 PM, Łukasz Rymanowski <
>
> [email protected]> wrote:
>
>
> Hi Michał, Aditya,
>
> I just upload a new version of PR:
> https://github.com/apache/mynewt-nimble/pull/8
> It contains fixes for the problem mentioned above, however solution is
>
> bit
>
> different from what Michał suggested.
> @MIchał, could you take a look?
>
> @Aditya, Could you be able to test it and give us a feedback on this?
>
> Best
> Łukasz
>
>
>
> On 6 April 2018 at 14:08, Michał Narajowski <
>
> [email protected]>
>
> wrote:
>
> Hi Aditya,
>
> Mesh is using Adv extensions under the hood if you have Łukasz's patch
> and enable BLE_EXT_ADV and set BLE_MULTI_ADV_INSTANCES to at least 1.
> Blemesh_shell has a command "init" which initializes mesh stack and
> starts advertising Unprovisioned Mesh Beacon.
>
> I tested this now and I noticed a bug. Here is a patch for that bug:
> https://pastebin.com/gbyX8H56
> Please apply it on top of Łukasz's branch.
>
> Hope that helps. Let us know how it works for you.
>
> BR,
> Michał
>
> 2018-04-06 11:09 GMT+02:00 Aditya Xavier <[email protected]>:
>
> Hi Michał / Łukasz,
>
> I have been trying to understand the blemesh_shell, and I fail to
>
> understand how / where it is using the Advertisement extensions.
>
>
> Basically, could you point me towards the difference if I need to
>
> implement, in order to use blemesh instead.
>
>
> From what I gathered / understood after going through the code is that
>
> blemesh_shell basically allows various functions to be triggered through
> shell commands.
>
>
> Thanks,
> Aditya Xavier.
>
>
> On 03-Apr-2018, at 3:54 PM, Michał Narajowski <
>
> [email protected]> wrote:
>
>
> Hi Aditya,
>
> Please set BLE_MESH: 1 and BLE_MESH_SHELL: 1 and you should be able to
> use both btshell and mesh shell. Let us know how that works for you.
> [email protected] <mailto:[email protected] <[email protected]>>
> Best regards
> Michał
>
> 2018-04-03 7:56 GMT+02:00 Aditya Xavier <[email protected] <mailto:
> [email protected] <[email protected]>>>:
>
> Hi Łukasz,
>
> Any pointers, as to what needs to be implemented from the
>
> blemesh_shell app ?
>
>
>
> Thanks,
> Aditya Xavier.
>
> On 02-Apr-2018, at 11:34 PM, Łukasz Rymanowski <
>
> [email protected] <mailto:[email protected]
> <[email protected]>>> wrote:
>
>
> Second thought
> [email protected] <mailto:[email protected] <[email protected]>>
> Aditya,
> Since I did not test it a lot, would it be possible to give us
>
> feedback how
>
> it works for you?
>
> Best
> Lukasz
>
>
>
>
> On Mon, Apr 2, 2018, 20:01 Łukasz Rymanowski <
>
> [email protected]>
>
> wrote:
>
> Hi Aditya.
>
> On Mon, Apr 2, 2018, 19:14 Aditya Xavier <[email protected]>
>
> wrote:
>
>
> Hi Łukasz,
>
> Is there anything special required to get this working along with
>
> BLE ?
>
>
>
> For e.g. would the btshell app code for ADV_EXT work along with
>
> mesh with
>
> the provided patches ?
>
>
> In addition to configuration mentioned in PR commit message, the
>
> btshell
>
> app would have to enable ble mesh and ble mesh shell (check
>
> blemesh_shell
>
> app for that)
>
>
> Mesh and BLE seems to compile however, am currently unable to get
>
> Mesh
>
> working.
>
> Also, any reason why this was not accepted yet ?
>
>
> People are busy with other stuff I guess. I think it will be merged
> eventually.
>
>
>
>
> Thanks,
> Aditya Xavier.
>
>
> Best
> Lukasz
>
>
>
> On 20-Mar-2018, at 12:57 AM, Sterling Hughes <
>
> [email protected]> wrote:
>
>
> +1 - this is great, thanks Lukasz!
>
> On 19 Mar 2018, at 6:36, Łukasz Rymanowski wrote:
>
> Hi All,
>
> I saw people asking around about possibility to advertise with
>
> non-mesh
>
> data while mesh is running on Mynewt. Well this is possible to
>
> do but
>
> of
>
> course it brings a lot of risk for mesh operations and
>
> especially
>
> for
>
> friendship scenario. However I went ahead and added support for
>
> this in
>
> Mynewt and I'm interested in how it works for you.
>
> So here is a PR which makes use of multi instances from BT5
>
> Advertising
>
> extensions and basically allows you to create additional
>
> instances
>
> which
>
> contains non-mesh data.
>
> https://github.com/apache/mynewt-nimble/pull/8
>
> Instructions on how to enable it you can find in the commit
>
> message.
>
>
> Comments are welcome
>
> Best
> Łukasz
>
>
>
>
