Hi Nges,
Can you please run the following commands and send the output?
newt target show
newt -v -lDEBUG target build blinky
It is probably going to generate a lot of text.
Thanks,
Chris
On Fri, Mar 04, 2016 at 02:23:33AM +0100, Nges B wrote:
> Yes I have done all the above exactly as you have given and have the
> execpected results.
>
> Then from my reading here
> http://mynewt.apache.org/os/get_started/project1/#build-test-code-on-simulator
>
> it says I should run the following
>
> $ cd ~/dev/larva/hw/bsp/olimex_stm32-e407_devboard
> $ diff olimex_stm32-e407_devboard.ld run_from_sram.ld
> $ cp run_from_sram.ld olimex_stm32-e407_devboard.ld
> $ cd ~/dev/larva/project/blinky/
>
> all the above commands give me expected output.
> now when I run
>
> $ newt target build blinky
>
> I get the following error
>
> Error: No configuration section exists
>
> so I do not understand what the error is.
>
>
> On 3/4/16, Christopher Collins <[email protected]> wrote:
> > Hi Nges,
> >
> > Did you create the 'blinky' target using newt? This process is a bit of
> > a hassle at the moment, but you only have to do it once.
> >
> > The following set of commands should do the trick:
> >
> > $ newt target create blinky
> > $ newt target set blinky arch=cortex_m4
> > $ newt target set blinky compiler=arm-none-eabi-m4
> > $ newt target set blinky project=blinky
> > $ newt target set blinky compiler_def=debug
> > $ newt target set blinky bsp=hw/bsp/olimex_stm32-e407_devboard
> >
> >
> > From http://mynewt.apache.org/os/get_started/project1/ :
> >
> > $ newt target create blinky
> > Creating target blinky
> > Target blinky sucessfully created!
> > $ newt target set blinky arch=cortex_m4
> > Target blinky successfully set arch to arm
> > $ newt target set blinky compiler=arm-none-eabi-m4
> > Target blinky successfully set compiler to arm-none-eabi-m4
> > $ newt target set blinky project=blinky
> > Target blinky successfully set project to blinky
> > $ newt target set blinky compiler_def=debug
> > Target blinky successfully set compiler_def to debug
> > $ newt target set blinky bsp=hw/bsp/olimex_stm32-e407_devboard
> > Target blinky successfully set bsp to hw/bsp/olimex_stm32-e407_devboard
> > $ newt target show blinky
> > blinky
> > arch=cortex_m4
> > bsp=hw/bsp/olimex_stm32-e407_devboard
> > compiler=arm-none-eabi-m4
> > compiler_def=debug
> > name=blinky
> > project=blinky
> >
> > Chris
> >
> > On Fri, Mar 04, 2016 at 02:04:56AM +0100, Nges B wrote:
> >> Have successfully run all the commands needed for the blinky project.
> >> Now wen I run $ newt target build blinky
> >> i get the error "Error: No configuration section exists"
> >> Please can somebody help me and Identify where I went wrong or I need
> >> to to to get the Configuration section exists?
> >> Thanks in advance
> >
>
>
> --
> "it is good to dream and work for the dreams than not to dream"
