On 4/12/16, marko kiiskila <[email protected]> wrote: > If you’re plugged in to right port, and the device does not show up, > maybe the cable is to blame. > > IF the microUSB cable you have is for phone charging only, it > might not have USB data lines connected. Just the power. > > If you have different cable try that, or you can try a different device > with Great , +1 the board reads now as Bus 002 Device 007: ID 03eb:2111 Atmel Corp.
But it stilll does not load. it complains now of xPSR: 0x81000000 pc: 0x000028f4 msp: 0x20002c00 at91samd bootloader 0: command requires more arguments in procedure 'at91samd' Error: exit status 1 Please I do not even understand the error, thanks > same cable. Does that other device show up in output of lsusb. > >> On Apr 12, 2016, at 9:29 AM, marko kiiskila <[email protected]> wrote: >> >> Hi Nges, >> >>> On Apr 12, 2016, at 9:24 AM, Nges B <[email protected] >>> <mailto:[email protected]>> wrote: >>> >>> On 4/12/16, [email protected] <mailto:[email protected]> <[email protected] >>> <mailto:[email protected]>> wrote: >>>> I have seen this error in two circumstances >>>> >>>> 1) my arduino was plugged in via the production USB port and not the >>>> debug >>>> port >>> >>> How do you know whether the USB is production port or Debug port??? >>> sorry if the question seems too obvious .THanks >>> >> >> This board is easy, as there’s so much documentation online. >> https://www.arduino.cc/en/Guide/ArduinoZero >> <https://www.arduino.cc/en/Guide/ArduinoZero> has a picture. >> >> >>>> 2) my pc had a stale process using the USB device >>>> >>>> Given that you lsusb doesn't show the device, we can probably rule out >>>> the >>>> second one. >>>> >>>>> On Apr 11, 2016, at 6:11 PM, Nges B <[email protected] >>>>> <mailto:[email protected]>> wrote: >>>>> >>>>> hello Chris, sorry for late response. >>>>> Yes I run Unbuntu15.04 >>>>> Yes I have the above command utilities. Using 'lsusb', it do not show >>>>> the arduino board. >>>>> I have followed the connection mechanism given in the manual. >>>>> >>>>> >>>>> >>>>>> On 4/11/16, Christopher Collins <[email protected] >>>>>> <mailto:[email protected]>> wrote: >>>>>> Hi Nges, >>>>>> >>>>>> That might be a problem with your USB connection to the Arduino Zero. >>>>>> Which Linux distribution are you running (e.g., Ubuntu)? If you have >>>>>> the "usb-devices" or "lsusb" command line utilities, they may provide >>>>>> some useful information. >>>>>> >>>>>> Thanks, >>>>>> Chris >>>>>> >>>>>>> On Mon, Apr 11, 2016 at 02:58:14AM +0100, Nges B wrote: >>>>>>> $ newt load arduino_boot >>>>>>> Downloading >>>>>>> /home/nges/myproj/bin/arduino_boot/apps/boot/boot.elf.bin >>>>>>> to 0x00000000 >>>>>>> Open On-Chip Debugger 0.8.0 (2014-10-25-15:24) >>>>>>> Licensed under GNU GPL v2 >>>>>>> For bug reports, read >>>>>>> http://openocd.sourceforge.net/doc/doxygen/bugs.html >>>>>>> <http://openocd.sourceforge.net/doc/doxygen/bugs.html> >>>>>>> Info : only one transport option; autoselect 'cmsis-dap' >>>>>>> Error: unable to open CMSIS-DAP device >>>>>>> Error: unable to init CMSIS-DAP driver >>>>>>> Error: Error selecting 'cmsis-dap' as transport >>>>>>> Runtime Error: /usr/share/openocd/scripts/interface/cmsis-dap.cfg:7: >>>>>>> in procedure 'script' >>>>>>> at file "embedded:startup.tcl", line 58 >>>>>>> at file >>>>>>> "/home/nges/myproj/repos/mynewt_arduino_zero/hw/bsp/arduino_zero//arduino_zero.cfg", >>>>>>> line 24 >>>>>>> in procedure 'interface' called at file >>>>>>> "/usr/share/openocd/scripts/interface/cmsis-dap.cfg", line 7 >>>>>>> Error: exit status 1 >>>>>>> >>>>>>> load - Load app image to target for <target-name>. >>>>>>> >>>>>>> Usage: >>>>>>> newt load [flags] >>>>>>> >>>>>>> Examples: >>>>>>> newt load <target-name> >>>>>>> >>>>>>> >>>>>>> Global Flags: >>>>>>> -l, --loglevel string Log level, defaults to WARN. (default >>>>>>> "WARN") >>>>>>> -o, --outfile string Filename to tee log output to >>>>>>> -q, --quiet Be quiet; only display error output. >>>>>>> -s, --silent Be silent; don't output anything. >>>>>>> -v, --verbose Enable verbose output when executing >>>>>>> commands. >>>>>>> >>>>>>> >>>>>>>> On 4/11/16, Nges B <[email protected] >>>>>>>> <mailto:[email protected]>> wrote: >>>>>>>> Ji All , >>>>>>>> I am trying to blink my arduino zero pr board. >>>>>>>> >>>>>>>> when I run the command newt load arduino_boot >>>>>>>> I get an error saying that unable to open CMSIS-DAP device , >>>>>>>> unable >>>>>>>> to init CMSIS-DAP driver and Error selecting 'cmsis-dap' as >>>>>>>> transport. >>>>>>>> >>>>>>>> I do not know what to do, please can someone help me??? >>>>>>>> thanks >>>>>>>> -- >>>>>>>> "A Goal is a Dream with a Plan and a Dateline" >>>>>>>> Do On to Others what you will like them to do on to you.'The Golden >>>>>>>> Rule' >>>>>>>> Firefox Student Ambassadors Regional Lead Cameroon. >>>>>>>> Software Developer, >>>>>>>> Web Designer and Developer. >>>>>>>> Music DJ . Artiste at Casky Black's Record >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> "A Goal is a Dream with a Plan and a Dateline" >>>>>>> Do On to Others what you will like them to do on to you.'The Golden >>>>>>> Rule' >>>>>>> Firefox Student Ambassadors Regional Lead Cameroon. >>>>>>> Software Developer, >>>>>>> Web Designer and Developer. >>>>>>> Music DJ . Artiste at Casky Black's Record >>>>> >>>>> >>>>> -- >>>>> "A Goal is a Dream with a Plan and a Dateline" >>>>> Do On to Others what you will like them to do on to you.'The Golden >>>>> Rule' >>>>> Firefox Student Ambassadors Regional Lead Cameroon. >>>>> Software Developer, >>>>> Web Designer and Developer. >>>>> Music DJ . Artiste at Casky Black's Record >>>> >>> >>> >>> -- >>> "A Goal is a Dream with a Plan and a Dateline" >>> Do On to Others what you will like them to do on to you.'The Golden >>> Rule' >>> Firefox Student Ambassadors Regional Lead Cameroon. >>> Software Developer, >>> Web Designer and Developer. >>> Music DJ . Artiste at Casky Black's Record >> > > -- "A Goal is a Dream with a Plan and a Dateline" Do On to Others what you will like them to do on to you.'The Golden Rule' Firefox Student Ambassadors Regional Lead Cameroon. Software Developer, Web Designer and Developer. Music DJ . Artiste at Casky Black's Record
