I am using Ubuntu 20.04 on WSL with CONFIG_HOST_LINUX. I had no problems
up to now.
Daniel Pereira de Carvalho
Em sáb., 17 de out. de 2020 às 15:15, Xiang Xiao <xiaoxiang781...@gmail.com>
escreveu:
> BTW, since Ubuntu for Windows 10 is same as Native Ubuntu, should we
> remove CONFIG_WINDOWS_UBUNTU(-u) support and let user select
> CONFIG_HOST_LINUX(-l) instead? This will reduce the maintain effort and
> avoid the misunderstanding that we don't support other Linux Distribution
> on Windows.
>
> > -----Original Message-----
> > From: Eduard Niesner <niesneredu...@gmail.com>
> > Sent: Friday, October 16, 2020 11:32 PM
> > To: dev@nuttx.apache.org
> > Subject: Re: Cannot build H7 configuration using Ubuntu for Windows 10
> >
> > I debugged and found what my problem was. I am using a custom
> configuration for a custom board and did not notice that the
> > Make.defs and flash.ld changed for H7 between Nuttx 9.0 and Nuttx 9.1.
> My configuration was still using the old ones from 9.0.
> > This is why even though the build worked it was crashing when running
> the bin on the board. Using the new files from 9.1 fixed the
> > problem.
> >
> > Thank you all for your help,
> > Edi
> >
> > On Wed, Oct 14, 2020 at 6:06 PM Gregory Nutt <spudan...@gmail.com>
> wrote:
> >
> > >
> > > > You are right. I used your changes and build using -u and I still
> > > > have
> > > the
> > > > same issue (the board does not bootup).
> > > > This is what I can see on the serial port:
> > > >
> > > > ADE
> > >
> > > This is debug output from arch/arm/src/stm32h7/start.c. The hang
> > > occurs somewhere after line 412 ( showprogress('E');), and probably
> > > after
> > > nx_start() is called. I would put breakpoints on nx_start(),
> > > up_initialize(), and nsh_main().
> > >
> > >
> > >
> > >
> > >
>
>
