What I realized is that there is no USB log message showing. I checked the options on USB monitor to show initialization messages but got no messages. :-(
Best regards, Flavio Em dom, 17 de jan de 2021 14:08, Alan Carvalho de Assis <acas...@gmail.com> escreveu: > Hi Flávio, > > Other file to compare is the System.map, it will give you some hints > about which functions are missing in your board. Then you can > investigate why the function is missing. > > Maybe it is just an #ifdef that is not entering because you forgot the > rename the board's name. > > Try to do it and let's us know if you see some difference. > > BR, > > Alan > > On 1/17/21, Flavio Castro Alves Filho <flavio.al...@gmail.com> wrote: > > Thank you very much for your fast response. > > > > I checked the boot calls and they are the same, regarding USB > > initialization. > > > > I compared the include/nuttx/config.h files too ... at least regarding > > USB, I couldn't see anything critical. > > > > The development approach that I am working was exactly starting with > > stm32discovery board and increasing features. Maybe I have to restart, > > checking first the USB. > > > > Best regards, > > > > Flavio > > > > Em dom., 17 de jan. de 2021 às 11:39, Grr <gebbe...@gmail.com> escreveu: > >> > >> What you can do is compare .config generated from that defconfig to > >> .config > >> generated from "./tools/configure.sh -l stm32f4discovery:usbnsh" and see > >> the differences. You can also compare include/nuttx/config.h from both > >> configs > >> > >> Another approach is to start from discovery config and do the > >> modifications > >> for your board. After you have it working, clone the config to a > >> different > >> board name. With "make savedefconfig" you can save your working > defconfig > >> > >> El dom, 17 ene 2021 a las 7:51, Flavio Castro Alves Filho (< > >> flavio.al...@gmail.com>) escribió: > >> > >> > As an additional information, if I load the STM32F4DISCO on my board, > >> > USB > >> > works. > >> > > >> > Em dom., 17 de jan. de 2021 às 10:43, Flavio Castro Alves Filho > >> > <flavio.al...@gmail.com> escreveu: > >> > > > >> > > Hello, > >> > > > >> > > I am working to port NuttX on a board based on STM32F4DISCOVERY. The > >> > > microcontroller is the STM32F407VET6. > >> > > > >> > > USB CDC support is not initializing. > >> > > > >> > > When I plug the USB on the board, I have the following dmesg > response > >> > > in > >> > Linux: > >> > > > >> > > [517062.075048] usb usb1-port2: attempt power cycle > >> > > [517062.726922] usb 1-2: new full-speed USB device number 47 using > >> > xhci_hcd > >> > > [517062.727170] usb 1-2: Device not responding to setup address. > >> > > [517062.935148] usb 1-2: Device not responding to setup address. > >> > > [517063.142906] usb 1-2: device not accepting address 47, error -71 > >> > > [517063.270916] usb 1-2: new full-speed USB device number 48 using > >> > xhci_hcd > >> > > [517063.271141] usb 1-2: Device not responding to setup address. > >> > > [517063.479134] usb 1-2: Device not responding to setup address. > >> > > > >> > > When I run stm32f4discovery:usbnsh on my discovery board, it works. > >> > > > >> > > I compared the defconfig from the base project and from mine and I > >> > > believe I have initialized everything that is related to the USB. > >> > > > >> > > Here is the defconfig for my board: > >> > > > >> > > # > >> > > # This file is autogenerated: PLEASE DO NOT EDIT IT. > >> > > # > >> > > # You can use "make menuconfig" to make any modifications to the > >> > > installed .config file. > >> > > # You can then do "make savedefconfig" to generate a new defconfig > >> > > file that includes your > >> > > # modifications. > >> > > # > >> > > # CONFIG_ARCH_FPU is not set > >> > > # CONFIG_MMCSD_MMCSUPPORT is not set > >> > > # CONFIG_MMCSD_SPI is not set > >> > > # CONFIG_NSH_ARGCAT is not set > >> > > # CONFIG_NSH_CMDOPT_HEXDUMP is not set > >> > > # CONFIG_NSH_CMDPARMS is not set > >> > > CONFIG_ADC=y > >> > > CONFIG_ANALOG=y > >> > > CONFIG_ARCH="arm" > >> > > CONFIG_ARCH_BOARD="phi-innovations" > >> > > CONFIG_ARCH_BOARD_STM32F4_PHI_IOT_GATEWAY=y > >> > > CONFIG_ARCH_CHIP="stm32" > >> > > CONFIG_ARCH_CHIP_STM32=y > >> > > CONFIG_ARCH_CHIP_STM32F407VG=y > >> > > CONFIG_ARCH_STACKDUMP=y > >> > > CONFIG_ARMV7M_MEMCPY=y > >> > > CONFIG_BOARDCTL_RESET=y > >> > > CONFIG_BOARDCTL_UNIQUEID=y > >> > > CONFIG_BOARDCTL_USBDEVCTRL=y > >> > > CONFIG_BOARD_LOOPSPERMSEC=16717 > >> > > CONFIG_BUILTIN=y > >> > > CONFIG_CDCACM=y > >> > > CONFIG_CDCACM_CONSOLE=y > >> > > CONFIG_CDCACM_RXBUFSIZE=256 > >> > > CONFIG_CDCACM_TXBUFSIZE=256 > >> > > CONFIG_CLOCK_MONOTONIC=y > >> > > CONFIG_CONSOLE_SYSLOG=y > >> > > CONFIG_DEBUG_ASSERTIONS=y > >> > > CONFIG_DEBUG_DMA=y > >> > > CONFIG_DEBUG_DMA_ERROR=y > >> > > CONFIG_DEBUG_DMA_INFO=y > >> > > CONFIG_DEBUG_DMA_WARN=y > >> > > CONFIG_DEBUG_ERROR=y > >> > > CONFIG_DEBUG_FEATURES=y > >> > > CONFIG_DEBUG_FS=y > >> > > CONFIG_DEBUG_FS_ERROR=y > >> > > CONFIG_DEBUG_FS_WARN=y > >> > > CONFIG_DEBUG_FULLOPT=y > >> > > CONFIG_DEBUG_HARDFAULT_ALERT=y > >> > > CONFIG_DEBUG_INFO=y > >> > > CONFIG_DEBUG_NET=y > >> > > CONFIG_DEBUG_NET_ERROR=y > >> > > CONFIG_DEBUG_NET_INFO=y > >> > > CONFIG_DEBUG_NET_WARN=y > >> > > CONFIG_DEBUG_RTC=y > >> > > CONFIG_DEBUG_RTC_ERROR=y > >> > > CONFIG_DEBUG_RTC_INFO=y > >> > > CONFIG_DEBUG_RTC_WARN=y > >> > > CONFIG_DEBUG_SYMBOLS=y > >> > > CONFIG_DEBUG_WARN=y > >> > > CONFIG_DEV_GPIO=y > >> > > CONFIG_ETH0_PHY_LAN8742A=y > >> > > CONFIG_EXAMPLES_PPPD=y > >> > > CONFIG_FAT_LCNAMES=y > >> > > CONFIG_FAT_LFN=y > >> > > CONFIG_FS_FAT=y > >> > > CONFIG_FS_PROCFS=y > >> > > CONFIG_FS_SMARTFS=y > >> > > CONFIG_HAVE_CXX=y > >> > > CONFIG_HAVE_CXXINITIALIZE=y > >> > > CONFIG_HEAP_COLORATION=y > >> > > CONFIG_IDLETHREAD_STACKSIZE=2048 > >> > > CONFIG_INTELHEX_BINARY=y > >> > > CONFIG_IOEXPANDER=y > >> > > CONFIG_LIB_HOSTNAME="STM32F4-Discovery" > >> > > CONFIG_MAX_TASKS=16 > >> > > CONFIG_MMCSD=y > >> > > CONFIG_MMCSD_MULTIBLOCK_DISABLE=y > >> > > CONFIG_MMCSD_SDIO=y > >> > > CONFIG_MTD=y > >> > > CONFIG_MTD_MX25L=y > >> > > CONFIG_MTD_SMART=y > >> > > CONFIG_MTD_SMART_FSCK=y > >> > > CONFIG_MX25L_SPIFREQUENCY=21000000 > >> > > CONFIG_NET=y > >> > > CONFIG_NETDB_DNSCLIENT=y > >> > > CONFIG_NETINIT_DEBUG=y > >> > > CONFIG_NETINIT_DHCPC=y > >> > > CONFIG_NETINIT_DNS=y > >> > > CONFIG_NETINIT_DNSIPADDR=0x08080808 > >> > > CONFIG_NETINIT_DRIPADDR=0x0a010101 > >> > > CONFIG_NETINIT_NOMAC=y > >> > > CONFIG_NETINIT_THREAD=y > >> > > CONFIG_NETUTILS_DHCPC=y > >> > > CONFIG_NETUTILS_NETCAT=y > >> > > CONFIG_NETUTILS_PPPD_PAP=y > >> > > CONFIG_NET_ARP_DUMP=y > >> > > CONFIG_NET_ARP_SEND=y > >> > > CONFIG_NET_BROADCAST=y > >> > > CONFIG_NET_ETH_PKTSIZE=1294 > >> > > CONFIG_NET_ICMP=y > >> > > CONFIG_NET_ICMP_SOCKET=y > >> > > CONFIG_NET_SOCKOPTS=y > >> > > CONFIG_NET_SOLINGER=y > >> > > CONFIG_NET_STATISTICS=y > >> > > CONFIG_NET_TCP=y > >> > > CONFIG_NET_TCPBACKLOG=y > >> > > CONFIG_NET_TCPURGDATA=y > >> > > CONFIG_NET_TCP_KEEPALIVE=y > >> > > CONFIG_NET_TCP_WRITE_BUFFERS=y > >> > > CONFIG_NET_UDP=y > >> > > CONFIG_NET_UDP_CHECKSUMS=y > >> > > CONFIG_NFILE_DESCRIPTORS=8 > >> > > CONFIG_NSH_ARCHINIT=y > >> > > CONFIG_NSH_BUILTIN_APPS=y > >> > > CONFIG_NSH_DISABLE_LOSMART=y > >> > > CONFIG_NSH_FILEIOSIZE=512 > >> > > CONFIG_NSH_LINELEN=64 > >> > > CONFIG_NSH_PROMPT_STRING="nsh$ " > >> > > CONFIG_NSH_READLINE=y > >> > > CONFIG_PREALLOC_TIMERS=4 > >> > > CONFIG_RAM_SIZE=114688 > >> > > CONFIG_RAM_START=0x20000000 > >> > > CONFIG_RAW_BINARY=y > >> > > CONFIG_RR_INTERVAL=200 > >> > > CONFIG_RTC=y > >> > > CONFIG_RTC_EXTERNAL=y > >> > > CONFIG_RTC_PCF8563=y > >> > > CONFIG_SCHED_HPWORK=y > >> > > CONFIG_SCHED_HPWORKPRIORITY=192 > >> > > CONFIG_SCHED_WAITPID=y > >> > > CONFIG_SDCLONE_DISABLE=y > >> > > CONFIG_STACK_COLORATION=y > >> > > CONFIG_START_DAY=13 > >> > > CONFIG_START_MONTH=9 > >> > > CONFIG_START_YEAR=2014 > >> > > CONFIG_STM32F4DISBB=y > >> > > CONFIG_STM32_ADC1=y > >> > > CONFIG_STM32_DMA1=y > >> > > CONFIG_STM32_DMA2=y > >> > > CONFIG_STM32_DMACAPABLE=y > >> > > CONFIG_STM32_ETHMAC=y > >> > > CONFIG_STM32_I2C1=y > >> > > CONFIG_STM32_JTAG_SW_ENABLE=y > >> > > CONFIG_STM32_OTGFS=y > >> > > CONFIG_STM32_PHYADDR=0 > >> > > CONFIG_STM32_PHYSR=31 > >> > > CONFIG_STM32_PHYSR_100FD=0x0018 > >> > > CONFIG_STM32_PHYSR_100HD=0x0008 > >> > > CONFIG_STM32_PHYSR_10FD=0x0014 > >> > > CONFIG_STM32_PHYSR_10HD=0x0004 > >> > > CONFIG_STM32_PHYSR_ALTCONFIG=y > >> > > CONFIG_STM32_PHYSR_ALTMODE=0x001c > >> > > CONFIG_STM32_PWR=y > >> > > CONFIG_STM32_RMII_EXTCLK=y > >> > > CONFIG_STM32_SDIO=y > >> > > CONFIG_STM32_SPI1=y > >> > > CONFIG_STM32_USART1=y > >> > > CONFIG_STM32_USART2=y > >> > > CONFIG_STM32_USART3=y > >> > > CONFIG_STM32_USART6=y > >> > > CONFIG_SYSTEM_NSH=y > >> > > CONFIG_SYSTEM_PING=y > >> > > CONFIG_USART2_IFLOWCONTROL=y > >> > > CONFIG_USART2_OFLOWCONTROL=y > >> > > CONFIG_USART3_RS485=y > >> > > CONFIG_USART6_RXBUFSIZE=64 > >> > > CONFIG_USART6_TXBUFSIZE=64 > >> > > CONFIG_USBDEV=y > >> > > CONFIG_USER_ENTRYPOINT="nsh_main" > >> > > > >> > > I believe that there is something missing or wrong in my > >> > > configuration, but I couldn't find what it is. > >> > > > >> > > Can anybody give me some advice on how to solve this issue? > >> > > > >> > > Best regards, > >> > > > >> > > Flavio > >> > > > >> > > > >> > > -- > >> > > Flavio de Castro Alves Filho > >> > > > >> > > flavio.al...@gmail.com > >> > > Twitter: http://twitter.com/#!/fraviofii > >> > > LinkedIn profile: www.linkedin.com/in/flaviocastroalves > >> > > >> > > >> > > >> > -- > >> > Flavio de Castro Alves Filho > >> > > >> > flavio.al...@gmail.com > >> > Twitter: http://twitter.com/#!/fraviofii > >> > LinkedIn profile: www.linkedin.com/in/flaviocastroalves > >> > > > > > > > > > -- > > Flavio de Castro Alves Filho > > > > flavio.al...@gmail.com > > Twitter: http://twitter.com/#!/fraviofii > > LinkedIn profile: www.linkedin.com/in/flaviocastroalves > > >
