Hi
I'v configured the network for my nucleo board and I get the following
info on the NuttX nsh:
nsh> ifup eth0
ifup eth0...OK
nsh> route
SEQ TARGET NETMASK ROUTER
1. 0.0.0.0 0.0.0.0 192.168.178.109
nsh> ifconfig
eth0 Link encap:Ethernet HWaddr 5e:11:f1:23:d9:ce at DOWN
inet addr:192.168.178.178 DRaddr:192.168.178.109 Mask:255.255.0.0
lo Link encap:Local Loopback at RUNNING
inet addr:127.0.0.1 DRaddr:127.0.0.1 Mask:255.0.0.0
IPv4 TCP UDP ICMP
Received 0000 0000 0000 0000
Dropped 0000 0000 0000 0000
IPv4 VHL: 0000 Frg: 0000
Checksum 0000 0000 0000 ----
TCP ACK: 0000 SYN: 0000
RST: 0000 0000
Type 0000 ---- ---- 0000
Sent 0000 0000 0000 0000
Rexmit ---- 0000 ---- ----
nsh>
If I set set the flag "NETDEV_LATEINIT" the eth0 disappears...
I can't ping from and to the board
nsh> ping -c1 192.168.178.109
PING 192.168.178.109 56 bytes of data
No response from 192.168.178.109: icmp_seq=0 time=1000 ms
1 packets transmitted, 0 received, 100% packet loss, time 1000 ms
nsh>
Any idea?
BR
Roberto
