Hello everyone, Matteo from InSpace again with more questions.
We are currently in the process of selecting some non-volatile memory for our telemetry system so that we can log our flight data while our rocket is in the air. We're having some trouble settling on an option because of a few uncommonly encountered events that happen in our rocket. Typically our rockets hit around Mach 1.8 and they can experience a ton of vibrations while in the air. To circumvent any write interruptions, we wanted to use flash memory that can be soldered directly to the board. Unfortunately the NOR flash packages we've found are pretty small in terms of capacity, and it appears from our research that NuttX's support for NAND flash has not been tested on real hardware yet, only simulated NAND memory. The goal was to have some kind of very reliably connected (soldered) non volatile memory for in-flight logging, and then copy all the logs to the SD card upon landing for easy removal and placement into a laptop, etc. We've now found a microSD card slot which locks in the card so that it doesn't easily lose connection during vibration (though still not perfect). I am wondering if it may be possible to just log directly to the SD card to avoid having to consider another type of memory. The SD card is also quite cheap memory. For this setup, I would want to have two equal partitions on the SD card (which would be around 32GB in total capacity). One partition a FAT file system, and one a power-safe file system. The power safe partition would be used for logging in flight to avoid corruption on power loss/discontinuity, and the FAT file system would be copied to upon landing so that data is easily accessible from a laptop. I'm not sure if this is possible within NuttX as I'm not familiar with how the OS handles SD card/memory partitions. In addition, I was hoping to use littlefs for the power-safe file system but I am not sure that it works with SD devices. I've found evidence online of some people using it with SD cards, but not sure about how that may interact with using it through NuttX. If anyone has used littlefs on an SD card, or knows of a different power-safe file system we could use (I couldn't find any in the file system listings) that would be great. Or if there are any suggestions for memory options (we're still investigating) supported by NuttX that could contain at least around 200MB of data. Thank you, Matteo
signature.asc
Description: PGP signature
