@Alexei this definitely can be done in realtime, BUT ... :) The setting affects Working microphone so it is impossible to ON/OFF it while speaking :( The only option I can see is to add dropdown control to testSetupDialog (the one with choose camera and test recording). So we can have something like:
1) default system setting (can be moved to Admin->configuration to avoid rewriting it after each upgrade) 2) per user setting stored in LocalData (like rememberLogin default cam/mic etc.) using above scheme user can change the setting while entering the room or "re-sync" audio/video What do you think? On Tue, Apr 23, 2013 at 3:24 AM, Joseph Karwat <[email protected]> wrote: > We tested AEC out-of-the-box. We just installed and ran a meeting in > OM2.1- Litle or no echo. We then, using the exact same configuration, > logged in to an OM2.0 server and ran a meeting. We experienced substantial > echo. We were both running a PC with Flash echo cancellation on but no > hardware echo cancelation. > > Also for OM2.1 Where do I set the buffer lenghth? Are there any other > parameters/options I should know about? > > > > Joseph Karwat | CEO | 415-462-0263 | JellVideo | www.jellnet.com | > JELL NETWORKS, INC. > Enterprise Video Collaboration Solutions > > Click Here to Register for your JellVideo Collaboration Account > > > > -----Original Message----- > From: Alexei Fedotov [mailto:[email protected]] > Sent: Monday, April 22, 2013 12:49 PM > To: [email protected] > Subject: RE: AEC in the new release > > Joseph, which devices show improvement? Which buffer length did you use? > > I like the suggestion - Maxim, how is it possible to configure AEC in > realtime? > On Apr 22, 2013 11:30 PM, "Joseph Karwat" <[email protected]> wrote: > > > We have a test OM2.1 server installed at AWS running Unbuntu 12.04. > > > > We tested AEC this morning for the first time and it did seem to make > > the audio work very well. Little if no echo. We still need to test > > under a wide range of scenarios, but we are encouraged by the > > performance this morning. > > > > If you do make it a configurable setting. It should be an option when > > setting up the room or allow the individual user to enable/disabe AEC > > when in a conference room. > > > > Making it a system-wide configuration option will delay testing and > > adoption. > > > > We will be conducting further testing of AEC over the next few days > > and will report back with our findings. Anyone wishing to participate > > in our AEC testing is encouraged to contact me. > > > > > > Joseph Karwat |415-462-0263 | JellVideo | www.jellnet.com | JELL > > NETWORKS, INC. > > Enterprise Video Collaboration Solutions > > > > Click Here to Register for your JellVideo Collaboration Account > > > > > > -----Original Message----- > > From: Alexei Fedotov [mailto:[email protected]] > > Sent: Monday, April 22, 2013 12:49 AM > > To: dev; [email protected] > > Subject: Re: AEC in the new release > > > > There are no answers. My point here is that we can be 100% sure that > > today AEC does not work as expected, and provides distinctive and high > > quality echo in 100% of situations when users use separate dynamic and > > microphone systems. > > > > The new thing is AEC mechanism sometimes meddles with hardware echo > > cancellation support providing temporary sound outages. It also > > provides visible de-synchronization between sound and video channels. > > > > If someone has a different experience, please, speak up. > > > > So I have two ideas to speak of. 1. Disable AEC in openmeetings > > releases by default. It takes a simple configuration change to enable > > it. 2. Later understand when AEC really works, and fix it. > > > > Folks, please again let me know if you disagree and have beneficial > > AEC experience. > > -- > > With best regards / с наилучшими пожеланиями, Alexei Fedotov / Алексей > > Федотов, http://dataved.ru/ > > +7 916 562 8095 > > > > > > On Thu, Apr 18, 2013 at 11:11 PM, Alexei Fedotov > > <[email protected]> > > wrote: > > > Hello guys, > > > How AEC (acoustic echo cancellation) works for you in the new release? > > > Can anyone share usage experience? > > > > > > -- > > > With best regards / с наилучшими пожеланиями, Alexei Fedotov / > > > Алексей Федотов, http://dataved.ru/ > > > +7 916 562 8095 > > > > > > -- WBR Maxim aka solomax
