This seems the same that I already reviewed by itself: Acked-by: Jarno Rajahalme <ja...@ovn.org>
> On Jan 27, 2016, at 9:51 AM, Ben Pfaff <b...@ovn.org> wrote: > > Consider the following flow table: > > table=0 actions=resubmit(,1),2 > table=1 actions=debug_recirc > > When debug_recirc triggers recirculation and we later resume processing, > only the output to port 2 should be executed, because the effects of > "resubmit" have already taken place. However, until now, the "resubmit" > was added to the actions to execute post-recirculation, resulting in an > infinite loop. > > Now consider this flow table (as seen in the "MPLS handling" test in > ofproto-dpif.at): > > table=0 actions=pop_mpls(0x0806),resubmit(,1) > table=1 ip,nw_dst=1.2.3.4 actions=controller > > Here, we do want to add the "resubmit" to the actions to execute > post-recirculation, since the "resubmit" cannot be processed until after > recirculation makes the nw_dst field available. > > This commit fixes the problem in both cases. > > Found when testing a feature based on recirculation. > > Signed-off-by: Ben Pfaff <b...@ovn.org> > --- > ofproto/ofproto-dpif-xlate.c | 24 +++++++++++++++++++++++- > tests/ofproto-dpif.at | 24 ++++++++++++++++++++++++ > 2 files changed, 47 insertions(+), 1 deletion(-) > > diff --git a/ofproto/ofproto-dpif-xlate.c b/ofproto/ofproto-dpif-xlate.c > index 4b25bf4..6e928da 100644 > --- a/ofproto/ofproto-dpif-xlate.c > +++ b/ofproto/ofproto-dpif-xlate.c > @@ -4575,8 +4575,30 @@ do_xlate_actions(const struct ofpact *ofpacts, size_t > ofpacts_len, > break; > > case OFPACT_RESUBMIT: > + /* Recirculation complicates resubmit. There are two cases: > + * > + * - If mpls_pop has been executed, then the flow table > lookup > + * as part of resubmit might depend on fields that can only > + * be obtained via recirculation, so the resubmit itself > + * triggers recirculation and we need to make sure that the > + * resubmit is executed again after recirculation. > + * Therefore, in this case we trigger recirculation and let > + * the code following this "switch" append the resubmit to > + * the post-recirculation actions. > + * > + * - Otherwise, some action in the flow entry found by > resubmit > + * might trigger recirculation. If that happens, then we > do > + * not want to execute the resubmit again after > + * recirculation, so we want to skip back to the head of > the > + * loop to avoid that, only adding any actions that follow > + * the resubmit to the post-recirculation actions. > + */ > + if (ctx->was_mpls) { > + ctx_trigger_recirculation(ctx); > + break; > + } > xlate_ofpact_resubmit(ctx, ofpact_get_RESUBMIT(a)); > - break; > + continue; > > case OFPACT_SET_TUNNEL: > flow->tunnel.tun_id = htonll(ofpact_get_SET_TUNNEL(a)->tun_id); > diff --git a/tests/ofproto-dpif.at b/tests/ofproto-dpif.at > index bfb1b56..aa2f1bb 100644 > --- a/tests/ofproto-dpif.at > +++ b/tests/ofproto-dpif.at > @@ -4203,6 +4203,30 @@ AT_CHECK_UNQUOTED([tail -1 stdout], [0], [Datapath > actions: 3 > OVS_VSWITCHD_STOP > AT_CLEANUP > > +# This test verifies that "resubmit", when it triggers recirculation > +# indirectly through the flow that it recursively invokes, is not > +# re-executed when execution continues later post-recirculation. > +AT_SETUP([ofproto-dpif - recirculation after resubmit]) > +OVS_VSWITCHD_START > +ADD_OF_PORTS([br0], [1], [2]) > + > +AT_DATA([flows.txt], [dnl > +table=0 in_port=1 actions=resubmit(,1),2 > +table=1 in_port=1 actions=debug_recirc > +]) > +AT_CHECK([ovs-ofctl add-flows br0 flows.txt]) > + > +flow="in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)" > +AT_CHECK([ovs-appctl ofproto/trace ovs-dummy "$flow" -generate], [0], > [stdout]) > +AT_CHECK_UNQUOTED([tail -1 stdout], [0], [Datapath actions: recirc(0x1) > +]) > +AT_CHECK([ovs-appctl ofproto/trace ovs-dummy "$flow,recirc_id(1)" > -generate], [0], [stdout]) > +AT_CHECK_UNQUOTED([tail -1 stdout], [0], [Datapath actions: 2 > +]) > + > +OVS_VSWITCHD_STOP > +AT_CLEANUP > + > # Two testcases below are for the ofproto/trace command > # The first one tests all correct syntax: > # ofproto/trace [dp_name] odp_flow [-generate|packet] > -- > 2.1.3 > > _______________________________________________ > dev mailing list > dev@openvswitch.org > http://openvswitch.org/mailman/listinfo/dev _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev