Hi Carlos/Tyson/Chetan, Any Suggestions? Note: I just tried to increase the timeout on the health checks …no luck.
Thanks, Kumar. On 3/5/18, 12:28 PM, "Kumar Subramanian" <[email protected]> wrote: This is the output log [2018-03-05T20:24:10.016Z] [INFO] Initializing Kamon... [INFO] [03/05/2018 20:24:10.301] [main] [StatsDExtension(akka://kamon)] Starting the Kamon(StatsD) extension [2018-03-05T20:24:10.352Z] [INFO] Slf4jLogger started [2018-03-05T20:24:10.706Z] [INFO] [??] [Config] environment set value for db.whisk.actions [2018-03-05T20:24:10.707Z] [INFO] [??] [Config] environment set value for db.protocol [2018-03-05T20:24:10.708Z] [INFO] [??] [Config] environment set value for limits.actions.sequence.maxLength [2018-03-05T20:24:10.708Z] [INFO] [??] [Config] environment set value for limits.triggers.fires.perMinute [2018-03-05T20:24:10.708Z] [INFO] [??] [Config] environment set value for akka.cluster.seed.nodes [2018-03-05T20:24:10.709Z] [INFO] [??] [Config] environment set value for limits.actions.invokes.concurrent [2018-03-05T20:24:10.709Z] [INFO] [??] [Config] environment set value for controller.instances [2018-03-05T20:24:10.710Z] [INFO] [??] [Config] environment set value for controller.localBookkeeping [2018-03-05T20:24:10.710Z] [INFO] [??] [Config] environment set value for whisk.version.date [2018-03-05T20:24:10.710Z] [INFO] [??] [Config] environment set value for db.port [2018-03-05T20:24:10.711Z] [INFO] [??] [Config] environment set value for whisk.version.buildno [2018-03-05T20:24:10.711Z] [INFO] [??] [Config] environment set value for db.whisk.activations [2018-03-05T20:24:10.711Z] [INFO] [??] [Config] environment set value for db.username [2018-03-05T20:24:10.712Z] [INFO] [??] [Config] environment set value for limits.actions.invokes.perMinute [2018-03-05T20:24:10.712Z] [INFO] [??] [Config] environment set value for db.whisk.auths [2018-03-05T20:24:10.712Z] [INFO] [??] [Config] environment set value for limits.actions.invokes.concurrentInSystem [2018-03-05T20:24:10.712Z] [INFO] [??] [Config] environment set value for runtimes.manifest [2018-03-05T20:24:10.713Z] [INFO] [??] [Config] environment set value for kafka.hosts [2018-03-05T20:24:10.713Z] [INFO] [??] [Config] environment set value for db.host [2018-03-05T20:24:10.713Z] [INFO] [??] [Config] environment set value for port [2018-03-05T20:24:10.714Z] [INFO] [??] [Config] environment set value for db.password [2018-03-05T20:24:10.714Z] [INFO] [??] [Config] environment set value for db.provider Received killTask for task whisk-controller.28d25d91-20b3-11e8-8754-3afdc003616b [INFO] [03/05/2018 20:25:38.974] [kamon-shutdown-hook-1] [CoordinatedShutdown(akka://kamon)] Starting coordinated shutdown from JVM shutdown hook [2018-03-05T20:25:38.975Z] [INFO] Starting coordinated shutdown from JVM shutdown hook [2018-03-05T20:25:38.982Z] [INFO] [??] [Controller] Shutting down Kamon with coordinated shutdown ERROR_LOG I0305 20:24:09.220711 1337 exec.cpp:162] Version: 1.2.3 I0305 20:24:09.227144 1338 exec.cpp:237] Executor registered on agent 995020e0-5129-44a3-8cf4-65900838b3af-S7 W0305 20:24:09.227144 1341 logging.cpp:91] RAW: Received signal SIGTERM from process 10243 of user 0; exiting On 3/5/18, 12:24 PM, "Kumar Subramanian" <[email protected]> wrote: I get the following error while in the deploying state (then kills it automatically and re-installs and goes on…) Task was killed since health check failed. Reason: ConnectionAttemptFailedException: Connection attempt to <whisk_controller_ip>>:8888 failed On 3/5/18, 12:21 PM, "Kumar Subramanian" <[email protected]> wrote: Gave the value as mykafka.marathon.mesos:9092…it seems to be going forward now with the deployment…hope it succeeds On 3/5/18, 12:13 PM, "Kumar Subramanian" <[email protected]> wrote: Hi Chetan, I resolved all the settings (not sure about some those values set)….now I’m getting the following error I0305 20:07:00.341622 21216 exec.cpp:162] Version: 1.2.3 I0305 20:07:00.347102 21224 exec.cpp:237] Executor registered on agent 995020e0-5129-44a3-8cf4-65900838b3af-S4 Exception in thread "main" org.apache.kafka.common.KafkaException: Failed create new KafkaAdminClient at org.apache.kafka.clients.admin.KafkaAdminClient.createInternal(KafkaAdminClient.java:322) at org.apache.kafka.clients.admin.AdminClient.create(AdminClient.java:50) at whisk.connector.kafka.KafkaMessagingProvider$.ensureTopic(KafkaMessagingProvider.scala:70) at whisk.core.controller.Controller$.main(Controller.scala:217) at whisk.core.controller.Controller.main(Controller.scala) Caused by: org.apache.kafka.common.config.ConfigException: No resolvable bootstrap urls given in bootstrap.servers at org.apache.kafka.clients.ClientUtils.parseAndValidateAddresses(ClientUtils.java:64) at org.apache.kafka.clients.admin.KafkaAdminClient.<init>(KafkaAdminClient.java:345) at org.apache.kafka.clients.admin.KafkaAdminClient.createInternal(KafkaAdminClient.java:315) ... 4 more <<WHISK_CONTROLLER ENVIRONMENT SETTINGS>> The config environment values are: "KAFKA_HOST": "broker-0.kafka.mesos" "KAFKA_HOSTS": "mykafka.docker:9092" Here is the Kakfka service in my dcos services <<KAFKA_SERVICE>> ID: mykafka.654fa8cd-1e56-11e8-8754-3afdc003616b Name: mykafka Address: <<internal_ip>> Status: Running On 3/5/18, 12:01 PM, "Kumar Subramanian" <[email protected]> wrote: Also what is DB_WHISK_ACTIVATIONS=local_activations, what does it mean by “local” activations? This setting is also needed, what should the value be in my dcos env? Should it still be local_activations? On 3/5/18, 11:48 AM, "Kumar Subramanian" <[email protected]> wrote: Thanks Chetan, I added that now I’m getting the [2018-03-05T19:43:45.025Z] [ERROR] [??] [Config] required property kafka.hosts still not set what is kafka.hosts is that the kafka host name? (as in mykafka…that;s the kafka name I gave when I installed kakfa). Should it be just the name or is FQDN ? On 3/5/18, 11:32 AM, "Chetan Mehrotra" <[email protected]> wrote: > required property controller.instances still not set Looks like some configs are missing. You would need to this or few more props. The configs are generally managed via Ansible for default setup. For dcos you may need to configure them explicitly. You can see various configs and there values as an example at [1] (controller.instances becomes CONTROLLER_INSTANCES). They would need to be tweaked as per your setup though Chetan Mehrotra [1] https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_apache_incubator-2Dopenwhisk-2Ddevtools_blob_master_docker-2Dcompose_docker-2Dwhisk-2Dcontroller.env&d=DwIFaQ&c=uilaK90D4TOVoH58JNXRgQ&r=F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=K8Rzl5BrVqOWFx5b1fYG8EjdY-6JVyi-x_eMD0thaKY&s=VfbixlUG4tFbgBNxiMr-KCNJOakmlGuNcnXLlbQMrVY&e= On Tue, Mar 6, 2018 at 12:09 AM, Kumar Subramanian <[email protected]> wrote: > Hi, > I was able to successfully do the following > 1) Build the Controller image > 2) Push the image > > However when I installed the controller package it gives me the following error in the output; then it shuts down and retries the installation (goes on…) > > Registered docker executor on 10.0.6.13 > Starting task whisk-controller.a46ae612-20a2-11e8-8754-3afdc003616b > [2018-03-05T18:25:55.853Z] [INFO] Initializing Kamon... > [INFO] [03/05/2018 18:25:56.151] [main] [StatsDExtension(akka://kamon)] Starting the Kamon(StatsD) extension > [2018-03-05T18:25:56.193Z] [INFO] Slf4jLogger started > [2018-03-05T18:25:56.552Z] [INFO] [??] [Config] environment set value for db.whisk.actions > [2018-03-05T18:25:56.554Z] [INFO] [??] [Config] environment set value for db.protocol > [2018-03-05T18:25:56.554Z] [INFO] [??] [Config] environment set value for limits.triggers.fires.perMinute > [2018-03-05T18:25:56.554Z] [INFO] [??] [Config] environment set value for limits.actions.invokes.concurrent > [2018-03-05T18:25:56.555Z] [INFO] [??] [Config] environment set value for whisk.version.date > [2018-03-05T18:25:56.555Z] [INFO] [??] [Config] environment set value for db.port > [2018-03-05T18:25:56.555Z] [INFO] [??] [Config] environment set value for whisk.version.buildno > [2018-03-05T18:25:56.556Z] [INFO] [??] [Config] environment set value for db.username > [2018-03-05T18:25:56.556Z] [INFO] [??] [Config] environment set value for limits.actions.invokes.perMinute > [2018-03-05T18:25:56.556Z] [INFO] [??] [Config] environment set value for db.whisk.auths > [2018-03-05T18:25:56.556Z] [INFO] [??] [Config] environment set value for limits.actions.invokes.concurrentInSystem > [2018-03-05T18:25:56.557Z] [INFO] [??] [Config] environment set value for runtimes.manifest > [2018-03-05T18:25:56.557Z] [INFO] [??] [Config] environment set value for db.host > [2018-03-05T18:25:56.558Z] [INFO] [??] [Config] environment set value for port > [2018-03-05T18:25:56.558Z] [INFO] [??] [Config] environment set value for db.password > [2018-03-05T18:25:56.558Z] [INFO] [??] [Config] environment set value for db.provider > [2018-03-05T18:25:56.561Z] [ERROR] [??] [Config] required property controller.instances still not set > [2018-03-05T18:25:56.561Z] [ERROR] [??] [Controller] Bad configuration, cannot start. > > Any suggestions? > > > On 3/2/18, 4:05 PM, "Kumar Subramanian" <[email protected]> wrote: > > This is the error I get when I did docker build (for Controller) > > Step 1/7 : FROM scala > repository scala not found: does not exist or no pull access > > > Any Suggestions? > > On 3/2/18, 3:34 PM, "Carlos Santana" <[email protected]> wrote: > > No that it’s still in PR > > Just pull the changes locally and build > > - Carlos Santana > @csantanapr > > > On Mar 2, 2018, at 6:20 PM, Kumar Subramanian <[email protected]> wrote: > > > > Is that change at https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_chetanmeh_incubator-2Dopenwhisk_blob_fa302249f4f9b4e6b3084956f18bda987674f46f_core_controller_Dockerfile&d=DwIFaQ&c=uilaK90D4TOVoH58JNXRgQ&r=F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=nLubLAFijdQ4pOPqIydDI_wguMgbdmdmoMXcP7g-m8k&s=0_zv4jTDip5Uk9oBB5-6Ka_Iug3KYWIhy7qzSDryqM0&e= not merged? I don’t see change in master https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_apache_incubator-2Dopenwhisk_blob_master_core_controller_Dockerfile&d=DwIFaQ&c=uilaK90D4TOVoH58JNXRgQ&r=F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=nLubLAFijdQ4pOPqIydDI_wguMgbdmdmoMXcP7g-m8k&s=TdB-IjihM3-0dqBF029dSMkoWbZHBAUXXqeDjfQMlhg&e= > > > > Thanks, > > Kumar. > > > > On 3/2/18, 2:59 PM, "Kumar Subramanian" <[email protected]> wrote: > > > > Ok, I will try to build the controller image and see. Will keep you posted. > > > > On 3/2/18, 2:39 PM, "Tyson Norris" <[email protected]> wrote: > > > > Thanks Carlos - I think you’re right. > > > > > > > > Kumar you can either build the controller image with that PR, or else you should be able to manually set the docker cmd, e.g. /bin/sh -c \"exec /init.sh 0 >> /dev/stdout\” on the dcos service for controller; > > > > > > > > I think you will have similar issue with invoker, mostly because this universe is far out of date from current openwhisk images. > > > > > > > > For invoker can you use the docker cmd as /bin/sh -c \"exec /init.sh --name $LIBPROCESS_IP >> /dev/stdout\” > > > > > > > > Additionally, the env vars (both invoker and controller) have changed substantially, so I would expect a few hiccups there as well. > > > > > > > > We are working on getting updates to the universe so that our internal deployment details are not included, and it will actually work with recent openwhisk images (and stay working) but haven’t gotten everything set just yet. > > > > > > > > Hope that helps > > > > Tyson > > > > > > > >>> On Mar 2, 2018, at 2:21 PM, Carlos Santana <[email protected]> wrote: > >> > >> > > > >> Maybe for the init.sh this PR is related > > > >> https://urldefense.proofpoint.com/v2/url?u=https-3A__na01.safelinks.protection.outlook.com_-3Furl-3Dhttps-253A-252F-252Fgithub.com-252Fapache-252Fincubator-2Dopenwhisk-252Fpull-252F3374-252Ffiles-2523diff-2D8f445fbdf6253dd176975ff6c629def4R18-26data-3D02-257C01-257Ctnorris-2540adobe.com-257C605cc50c7a484ccb833708d5808bfe64-257Cfa7b1b5a7b34438794aed2c178decee1-257C0-257C0-257C636556261107863657-26sdata-3Dtk8Des10hubLs7FNSgzDlsk1ibxDTIqSlXti-252FcAUyz0-253D-26reserved-3D0&d=DwIGaQ&c=uilaK90D4TOVoH58JNXRgQ&r=F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=LUthdew4Dt10vSAZSYRBbREqgwWk2PUWc4KDBJtt0uU&s=3UqWljTQjItMnzWhPrsfD1AF2IX6abtc9dYRfrxb2_M&e= > > > >> > > > >> > > > >> On Fri, Mar 2, 2018 at 5:09 PM Tyson Norris <[email protected]> > > > >> wrote: > > > >> > > > >>> Check your marathon/dcos service config to verify what image is used, and > > > >>> that you have the latest image pulled? > > > >>> > > > >>> The default should be openwhisk/controller - but I see that universe > > > >>> package marathon config is not set to force pull, so if you are using that > > > >>> image, make sure you have pulled the latest manually (or change the config > > > >>> to force pull in dcos/marathon ui). > > > >>> > > > >>> Tyson > > > >>> > > > >>>> On Mar 2, 2018, at 12:45 PM, Kumar Subramanian <[email protected]> > > > >>> wrote: > > > >>>> > > > >>>> Hi, > > > >>>> I have installed the following in DCOS successfully: > > > >>>> 1. Apigateway > > > >>>> 2. Exhibitor-dcos > > > >>>> 3. Kafka (name given is mykafka at the time of installation) > > > >>>> 4. Whisk-couchdb > > > >>>> 5. Consul > > > >>>> 6. Registrator > > > >>>> > > > >>>> Eror when deploying Whisk-Controller in DCOS: > > > >>>> When I tried to deploy whisk-controller with default settings, then the > > > >>> service fails to deploy (it just kills and redploys the service > > > >>> continuously on its own when deploying) > > > >>>> > > > >>>> Here is the content in the Error and Output > > > >>>> > > > >>>> STDERR: > > > >>>> (AT BEGINNING OF FILE) > > > >>>> I0302 20:38:35.176177 19822 exec.cpp:162] Version: 1.2.3 > > > >>>> I0302 20:38:35.180703 19824 exec.cpp:237] Executor registered on agent > > > >>> 995020e0-5129-44a3-8cf4-65900838b3af-S6 > > > >>>> docker: Error response from daemon: Container command 'init.sh' not > > > >>> found or does not exist.. > > > >>>> > > > >>>> OUTPUT: > > > >>>> (AT BEGINNING OF FILE) > > > >>>> Registered docker executor on 10.0.6.55 > > > >>>> Starting task whisk-controller.adb62c44-1e59-11e8-8754-3afdc003616b > > > >>>> > > > >>>> Can you please provide your valuable inputs on how to get > > > >>> whisk-controller deployed in dcos? > > > >>>> > > > >>>> Thanks, > > > >>>> Kumar. > > > >>>> > > > >>> > > > >>> > > > > > > > > > > > > > > > > > >
