Just consolidating the questions <<below>> On 3/7/18, 11:56 AM, "Kumar Subramanian" <[email protected]> wrote:
Hi Duy,
I was able to install the api gateway by calling make api-gateway. But, it
was not straight forward. The api-gateway was in the waiting state for a long
time. I had to suspend the deployment; set the acceptedRoles to null and
restart the deployment then it worked (please see my earlier mails regarding
probem with Api gateway installation)
Question:
1) What should be the APIGATEWAY_DNS value? It is needed to install the next
packages.
2) You mentioned “make sure Route53 record was set up correctly” in README .
What should be done to verify it? Can you please give me step by step
instructions on how to verify it?
Thanks,
Kumar.
On 3/7/18, 11:15 AM, "Kumar Subramanian" <[email protected]> wrote:
Hi Duy,
One your instructions at
https://github.com/duynguyen/incubator-openwhisk-deploy-mesos/tree/dcos-universe/dcos-deploy-script
You mention “make sure Route53 record was set up correctly” . What
should be done to verify it? Can you please give me step by step instructions
on how to verify it?
Thanks,
Kumar.
On 3/7/18, 10:52 AM, "Kumar Subramanian" <[email protected]>
wrote:
Hi Duy,
I got your PR on my local MAC. I have a dcos cluster on remote
machines. What are the instructions to deploy openwhisk to this dcos cluster?
Thanks,
Kumar.
On 3/7/18, 1:38 AM, "Duy Nguyen" <[email protected]> wrote:
Kumar - The PR has not been merged yet. Could you pull the PR
itself to try?
https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_apache_incubator-2Dopenwhisk-2Ddeploy-2Dmesos_pull_2&d=DwIFaQ&c=uilaK90D4TOVoH58JNXRgQ&r=F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=afQz0NoScGRmefphc9MyV-bV9-5iIC7nrIHVkvZv8gM&s=8q_6zaOcuwSuhZ4IcwVYfBZL2SAx6Jf9NGoyYbitGp0&e=
cheers,
Duy
On Tue, Mar 6, 2018 at 7:45 PM, Kumar Subramanian
<[email protected]>
wrote:
> Hi Duy,
> I would love to try it.
>
> Is your changes in master? If so what’s master link?
>
> In the link
https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_apache_incubator-2Dopenwhisk-2Ddeploy-2Dmesos&d=DwIFaQ&c=uilaK90D4TOVoH58JNXRgQ&r=F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=afQz0NoScGRmefphc9MyV-bV9-5iIC7nrIHVkvZv8gM&s=V6KK9cxXZORCCW_qK6d4qxaZC5vg-CajM4UQnusaP4c&e=
I
> only see a license.txt file in it.
>
> Thanks,
> Kumar.
>
> On 3/6/18, 9:41 AM, "Duy Nguyen" <[email protected]>
wrote:
>
> Hi Kumar,
>
> I have updated the universe to latest Openwhisk changes,
verified it
> on a
> vanilla DC/OS 1.11 cluster, and opened a PR at [1], do
you mind trying
> it
> out?
> Hope it would solve bunch of issues you got earlier.
>
> cheers,
> Duy
>
> [1]
https://urldefense.proofpoint.com/v2/url?u=https-3A__github.
>
com_apache_incubator-2Dopenwhisk-2Ddeploy-2Dmesos_pull_2&d=DwIFaQ&c=
>
uilaK90D4TOVoH58JNXRgQ&r=F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=
> Wd0tt9Y6emKuk7HzgaeTCmlXjND8hGbhr2r-NAd74ug&s=
> 6lelXSxZQpZSLezJ62bqfqxgcZkF3SNgkzaFNM_qZGU&e=
>
>
> On Tue, Mar 6, 2018 at 12:00 AM, Kumar Subramanian <
> [email protected]>
> wrote:
>
> > After I increased the timeout on the health checks I
get the
> following
> > [2018-03-05T22:58:34.042Z] [ERROR] [??]
[KafkaMessagingProvider]
> > ensureTopic for completed0 failed due to
java.util.concurrent.
> ExecutionException:
> > org.apache.kafka.common.errors.TimeoutException: Timed
out waiting
> for a
> > node assignment.
> > [2018-03-05T22:58:34.044Z] [ERROR] [??] [Controller]
failure during
> > msgProvider.ensureTopic for topic completed0
> > [INFO] [03/05/2018 22:58:34.070] [kamon-shutdown-hook-1]
> > [CoordinatedShutdown(akka://kamon)] Starting
coordinated shutdown
> from
> > JVM shutdown hook
> >
> > On 3/5/18, 2:58 PM, "Kumar Subramanian"
<[email protected]>
> wrote:
> >
> > Hi Carlos/Tyson/Chetan,
> > Any Suggestions?
> >
> > Note: I just tried to increase the timeout on the
health checks
> …no
> > luck.
> >
> > Thanks,
> > Kumar.
> >
> > On 3/5/18, 12:28 PM, "Kumar Subramanian" <
> [email protected]>
> > wrote:
> >
> > This is the output log
> > [2018-03-05T20:24:10.016Z] [INFO] Initializing
Kamon...
> > [INFO] [03/05/2018 20:24:10.301] [main]
> > [StatsDExtension(akka://kamon)] Starting the
Kamon(StatsD) extension
> > [2018-03-05T20:24:10.352Z] [INFO] Slf4jLogger
started
> > [2018-03-05T20:24:10.706Z] [INFO] [??] [Config]
environment
> set
> > value for db.whisk.actions
> > [2018-03-05T20:24:10.707Z] [INFO] [??] [Config]
environment
> set
> > value for db.protocol
> > [2018-03-05T20:24:10.708Z] [INFO] [??] [Config]
environment
> set
> > value for limits.actions.sequence.maxLength
> > [2018-03-05T20:24:10.708Z] [INFO] [??] [Config]
environment
> set
> > value for limits.triggers.fires.perMinute
> > [2018-03-05T20:24:10.708Z] [INFO] [??] [Config]
environment
> set
> > value for akka.cluster.seed.nodes
> > [2018-03-05T20:24:10.709Z] [INFO] [??] [Config]
environment
> set
> > value for limits.actions.invokes.concurrent
> > [2018-03-05T20:24:10.709Z] [INFO] [??] [Config]
environment
> set
> > value for controller.instances
> > [2018-03-05T20:24:10.710Z] [INFO] [??] [Config]
environment
> set
> > value for controller.localBookkeeping
> > [2018-03-05T20:24:10.710Z] [INFO] [??] [Config]
environment
> set
> > value for whisk.version.date
> > [2018-03-05T20:24:10.710Z] [INFO] [??] [Config]
environment
> set
> > value for db.port
> > [2018-03-05T20:24:10.711Z] [INFO] [??] [Config]
environment
> set
> > value for whisk.version.buildno
> > [2018-03-05T20:24:10.711Z] [INFO] [??] [Config]
environment
> set
> > value for db.whisk.activations
> > [2018-03-05T20:24:10.711Z] [INFO] [??] [Config]
environment
> set
> > value for db.username
> > [2018-03-05T20:24:10.712Z] [INFO] [??] [Config]
environment
> set
> > value for limits.actions.invokes.perMinute
> > [2018-03-05T20:24:10.712Z] [INFO] [??] [Config]
environment
> set
> > value for db.whisk.auths
> > [2018-03-05T20:24:10.712Z] [INFO] [??] [Config]
environment
> set
> > value for limits.actions.invokes.concurrentInSystem
> > [2018-03-05T20:24:10.712Z] [INFO] [??] [Config]
environment
> set
> > value for runtimes.manifest
> > [2018-03-05T20:24:10.713Z] [INFO] [??] [Config]
environment
> set
> > value for kafka.hosts
> > [2018-03-05T20:24:10.713Z] [INFO] [??] [Config]
environment
> set
> > value for db.host
> > [2018-03-05T20:24:10.713Z] [INFO] [??] [Config]
environment
> set
> > value for port
> > [2018-03-05T20:24:10.714Z] [INFO] [??] [Config]
environment
> set
> > value for db.password
> > [2018-03-05T20:24:10.714Z] [INFO] [??] [Config]
environment
> set
> > value for db.provider
> > Received killTask for task
whisk-controller.28d25d91-
> > 20b3-11e8-8754-3afdc003616b
> > [INFO] [03/05/2018 20:25:38.974]
[kamon-shutdown-hook-1]
> > [CoordinatedShutdown(akka://kamon)] Starting
coordinated shutdown
> from
> > JVM shutdown hook
> > [2018-03-05T20:25:38.975Z] [INFO] Starting
coordinated
> shutdown
> > from JVM shutdown hook
> > [2018-03-05T20:25:38.982Z] [INFO] [??]
[Controller] Shutting
> down
> > Kamon with coordinated shutdown
> >
> > ERROR_LOG
> > I0305 20:24:09.220711 1337 exec.cpp:162]
Version: 1.2.3
> > I0305 20:24:09.227144 1338 exec.cpp:237]
Executor
> registered on
> > agent 995020e0-5129-44a3-8cf4-65900838b3af-S7
> > W0305 20:24:09.227144 1341 logging.cpp:91]
RAW: Received
> signal
> > SIGTERM from process 10243 of user 0; exiting
> >
> > On 3/5/18, 12:24 PM, "Kumar Subramanian" <
> [email protected]>
> > wrote:
> >
> > I get the following error while in the
deploying state
> (then
> > kills it automatically and re-installs and goes on…)
> > Task was killed since health check failed.
Reason:
> > ConnectionAttemptFailedException: Connection attempt to
> > <whisk_controller_ip>>:8888 failed
> >
> >
> >
> > On 3/5/18, 12:21 PM, "Kumar Subramanian" <
> > [email protected]> wrote:
> >
> > Gave the value as
mykafka.marathon.mesos:9092…it
> seems to
> > be going forward now with the deployment…hope it
succeeds
> >
> > On 3/5/18, 12:13 PM, "Kumar
Subramanian" <
> > [email protected]> wrote:
> >
> > Hi Chetan,
> > I resolved all the settings (not
sure about some
> those
> > values set)….now I’m getting the following error
> > I0305 20:07:00.341622 21216
exec.cpp:162]
> Version:
> > 1.2.3
> > I0305 20:07:00.347102 21224
exec.cpp:237]
> Executor
> > registered on agent
995020e0-5129-44a3-8cf4-65900838b3af-S4
> > Exception in thread "main"
> org.apache.kafka.common.KafkaException:
> > Failed create new KafkaAdminClient
> > at org.apache.kafka.clients.
> >
admin.KafkaAdminClient.createInternal(KafkaAdminClient.java:322)
> > at org.apache.kafka.clients.
> > admin.AdminClient.create(AdminClient.java:50)
> > at whisk.connector.kafka.
> KafkaMessagingProvider$.
> > ensureTopic(KafkaMessagingProvider.scala:70)
> > at whisk.core.controller.
> > Controller$.main(Controller.scala:217)
> > at whisk.core.controller.
> > Controller.main(Controller.scala)
> > Caused by: org.apache.kafka.common.
> config.ConfigException:
> > No resolvable bootstrap urls given in bootstrap.servers
> > at
org.apache.kafka.clients.ClientUtils.
> > parseAndValidateAddresses(ClientUtils.java:64)
> > at org.apache.kafka.clients.
> > admin.KafkaAdminClient.<init>(KafkaAdminClient.java:345)
> > at org.apache.kafka.clients.
> >
admin.KafkaAdminClient.createInternal(KafkaAdminClient.java:315)
> > ... 4 more
> > <<WHISK_CONTROLLER ENVIRONMENT
SETTINGS>>
> > The config environment values are:
> > "KAFKA_HOST": "broker-0.kafka.mesos"
> > "KAFKA_HOSTS": "mykafka.docker:9092"
> >
> >
> > Here is the Kakfka service in my
dcos services
> > <<KAFKA_SERVICE>>
> > ID:
mykafka.654fa8cd-1e56-11e8-8754-3afdc003616b
> > Name: mykafka
> > Address: <<internal_ip>>
> > Status: Running
> >
> > On 3/5/18, 12:01 PM, "Kumar
Subramanian" <
> > [email protected]> wrote:
> >
> > Also what is
DB_WHISK_ACTIVATIONS=local_
> activations,
> > what does it mean by “local” activations? This setting
is also
> needed, what
> > should the value be in my dcos env? Should it still be
> local_activations?
> >
> > On 3/5/18, 11:48 AM, "Kumar
Subramanian" <
> > [email protected]> wrote:
> >
> > Thanks Chetan, I added that
now I’m
> getting the
> >
> > [2018-03-05T19:43:45.025Z]
[ERROR] [??]
> > [Config] required property kafka.hosts still not set
> >
> > what is kafka.hosts is that
the kafka
> host
> > name? (as in mykafka…that;s the kafka name I gave when
I installed
> kakfa).
> > Should it be just the name or is FQDN ?
> >
> >
> > On 3/5/18, 11:32 AM,
"Chetan Mehrotra" <
> > [email protected]> wrote:
> >
> > > required property
> controller.instances
> > still not set
> >
> > Looks like some configs
are missing.
> You
> > would need to this or few
> > more props. The configs
are generally
> > managed via Ansible for default
> > setup. For dcos you may
need to
> configure
> > them explicitly. You can see
> > various configs and
there values as
> an
> > example at [1]
> > (controller.instances
becomes
> > CONTROLLER_INSTANCES). They would need
> > to be tweaked as per
your setup
> though
> >
> > Chetan Mehrotra
> > [1]
https://urldefense.proofpoint.com/v2/url?u=https-3A__urldefense.proofpoint&d=DwIFaQ&c=uilaK90D4TOVoH58JNXRgQ&r=F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=afQz0NoScGRmefphc9MyV-bV9-5iIC7nrIHVkvZv8gM&s=krGGBEv7Z5rMpichLLcCKYj4GYHLFGSXDB7se_zq9t8&e=.
> com/v2/url?u=https-3A__urldefense.proofpoint&d=DwIFaQ&c=
>
uilaK90D4TOVoH58JNXRgQ&r=F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=
>
Wd0tt9Y6emKuk7HzgaeTCmlXjND8hGbhr2r-NAd74ug&s=hoaE2rcIjVS-9GdlR2d-
> rNVCuHc4I3L3hG3J5MxHMss&e=.
> > com/v2/url?u=https-3A__github.com_apache_incubator-
> > 2Dopenwhisk-2Ddevtools_blob_master_docker-2Dcompose_
> >
docker-2Dwhisk-2Dcontroller.env&d=DwIFaQ&c=uilaK90D4TOVoH58JNXRgQ&r=
> > F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=
> K8Rzl5BrVqOWFx5b1fYG8EjdY-
> >
6JVyi-x_eMD0thaKY&s=VfbixlUG4tFbgBNxiMr-KCNJOakmlGuNcnXLlbQMrVY&e=
> >
> >
> > On Tue, Mar 6, 2018 at
12:09 AM,
> Kumar
> > Subramanian
> >
<[email protected]> wrote:
> > > Hi,
> > > I was able to
successfully do the
> > following
> > > 1) Build the
Controller image
> > > 2) Push the image
> > >
> > > However when I
installed the
> controller
> > package it gives me the following error in the output;
then it shuts
> down
> > and retries the installation (goes on…)
> > >
> > > Registered docker
executor on
> 10.0.6.13
> > > Starting task
> whisk-controller.a46ae612-
> > 20a2-11e8-8754-3afdc003616b
> > >
[2018-03-05T18:25:55.853Z] [INFO]
> > Initializing Kamon...
> > > [INFO] [03/05/2018
18:25:56.151]
> [main]
> > [StatsDExtension(akka://kamon)] Starting the
Kamon(StatsD) extension
> > >
[2018-03-05T18:25:56.193Z] [INFO]
> > Slf4jLogger started
> > >
[2018-03-05T18:25:56.552Z] [INFO]
> [??]
> > [Config] environment set value for db.whisk.actions
> > >
[2018-03-05T18:25:56.554Z] [INFO]
> [??]
> > [Config] environment set value for db.protocol
> > >
[2018-03-05T18:25:56.554Z] [INFO]
> [??]
> > [Config] environment set value for
limits.triggers.fires.perMinute
> > >
[2018-03-05T18:25:56.554Z] [INFO]
> [??]
> > [Config] environment set value for
limits.actions.invokes.concurrent
> > >
[2018-03-05T18:25:56.555Z] [INFO]
> [??]
> > [Config] environment set value for whisk.version.date
> > >
[2018-03-05T18:25:56.555Z] [INFO]
> [??]
> > [Config] environment set value for db.port
> > >
[2018-03-05T18:25:56.555Z] [INFO]
> [??]
> > [Config] environment set value for whisk.version.buildno
> > >
[2018-03-05T18:25:56.556Z] [INFO]
> [??]
> > [Config] environment set value for db.username
> > >
[2018-03-05T18:25:56.556Z] [INFO]
> [??]
> > [Config] environment set value for
limits.actions.invokes.perMinute
> > >
[2018-03-05T18:25:56.556Z] [INFO]
> [??]
> > [Config] environment set value for db.whisk.auths
> > >
[2018-03-05T18:25:56.556Z] [INFO]
> [??]
> > [Config] environment set value for
limits.actions.invokes.
> > concurrentInSystem
> > >
[2018-03-05T18:25:56.557Z] [INFO]
> [??]
> > [Config] environment set value for runtimes.manifest
> > >
[2018-03-05T18:25:56.557Z] [INFO]
> [??]
> > [Config] environment set value for db.host
> > >
[2018-03-05T18:25:56.558Z] [INFO]
> [??]
> > [Config] environment set value for port
> > >
[2018-03-05T18:25:56.558Z] [INFO]
> [??]
> > [Config] environment set value for db.password
> > >
[2018-03-05T18:25:56.558Z] [INFO]
> [??]
> > [Config] environment set value for db.provider
> > >
[2018-03-05T18:25:56.561Z] [ERROR]
> [??]
> > [Config] required property controller.instances still
not set
> > >
[2018-03-05T18:25:56.561Z] [ERROR]
> [??]
> > [Controller] Bad configuration, cannot start.
> > >
> > > Any suggestions?
> > >
> > >
> > > On 3/2/18, 4:05 PM,
"Kumar
> Subramanian" <
> > [email protected]> wrote:
> > >
> > > This is the error
I get when I
> did
> > docker build (for Controller)
> > >
> > > Step 1/7 : FROM
scala
> > > repository scala
not found:
> does not
> > exist or no pull access
> > >
> > >
> > > Any Suggestions?
> > >
> > > On 3/2/18, 3:34
PM, "Carlos
> Santana"
> > <[email protected]> wrote:
> > >
> > > No that it’s
still in PR
> > >
> > > Just pull the
changes
> locally
> > and build
> > >
> > > - Carlos
Santana
> > > @csantanapr
> > >
> > > > On Mar 2,
2018, at 6:20
> PM,
> > Kumar Subramanian <[email protected]> wrote:
> > > >
> > > > Is that
change at
> >
https://urldefense.proofpoint.com/v2/url?u=https-3A__github.
> > com_chetanmeh_incubator-2Dopenwhisk_blob_
> fa302249f4f9b4e6b3084956f18bda
> > 987674f46f_core_controller_Dockerfile&d=DwIFaQ&c=
> uilaK90D4TOVoH58JNXRgQ&r=
> >
F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=nLubLAFijdQ4pOPqIydDI_
> > wguMgbdmdmoMXcP7g-m8k&s=0_zv4jTDip5Uk9oBB5-6Ka_
> Iug3KYWIhy7qzSDryqM0&e=
> > not merged? I don’t see change in master
> https://urldefense.proofpoint.com/v2/url?u=https-3A__
> urldefense.proofpoint&d=DwIFaQ&c=uilaK90D4TOVoH58JNXRgQ&r=
> F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=
>
Wd0tt9Y6emKuk7HzgaeTCmlXjND8hGbhr2r-NAd74ug&s=hoaE2rcIjVS-9GdlR2d-
> rNVCuHc4I3L3hG3J5MxHMss&e=.
> > com/v2/url?u=https-3A__github.com_apache_incubator-
> >
2Dopenwhisk_blob_master_core_controller_Dockerfile&d=DwIFaQ&c=
> > uilaK90D4TOVoH58JNXRgQ&r=F5C8fYlpBJ270qrdwLq2iRQrPd1CLa
> p8zItxk8laWpo&m=
> >
nLubLAFijdQ4pOPqIydDI_wguMgbdmdmoMXcP7g-m8k&s=TdB-IjihM3-
> > 0dqBF029dSMkoWbZHBAUXXqeDjfQMlhg&e=
> > > >
> > > > Thanks,
> > > > Kumar.
> > > >
> > > > On 3/2/18,
2:59 PM,
> "Kumar
> > Subramanian" <[email protected]> wrote:
> > > >
> > > > Ok, I
will try to
> build the
> > controller image and see. Will keep you posted.
> > > >
> > > > On
3/2/18, 2:39 PM,
> "Tyson
> > Norris" <[email protected]> wrote:
> > > >
> > > >
Thanks Carlos - I
> think
> > you’re right.
> > > >
> > > >
> > > >
> > > >
Kumar you can
> either
> > build the controller image with that PR, or else you
should be able
> to
> > manually set the docker cmd, e.g. /bin/sh -c \"exec
/init.sh 0 >>
> > /dev/stdout\” on the dcos service for controller;
> > > >
> > > >
> > > >
> > > > I
think you will
> have
> > similar issue with invoker, mostly because this
universe is far out
> of date
> > from current openwhisk images.
> > > >
> > > >
> > > >
> > > > For
invoker can
> you use
> > the docker cmd as /bin/sh -c \"exec /init.sh --name
$LIBPROCESS_IP >>
> > /dev/stdout\”
> > > >
> > > >
> > > >
> > > >
Additionally, the
> env
> > vars (both invoker and controller) have changed
substantially, so I
> would
> > expect a few hiccups there as well.
> > > >
> > > >
> > > >
> > > > We
are working on
> > getting updates to the universe so that our internal
deployment
> details are
> > not included, and it will actually work with recent
openwhisk images
> (and
> > stay working) but haven’t gotten everything set just
yet.
> > > >
> > > >
> > > >
> > > > Hope
that helps
> > > >
> > > > Tyson
> > > >
> > > >
> > > >
> > > >>> On Mar 2,
2018, at
> 2:21 PM,
> > Carlos Santana <[email protected]> wrote:
> > > >>
> > > >>
> > > >
> > > >> Maybe for
the init.sh
> this PR
> > is related
> > > >
> > > >>
> >
https://urldefense.proofpoint.com/v2/url?u=https-3A__na01.
> >
safelinks.protection.outlook.com_-3Furl-3Dhttps-253A-252F-
> > 252Fgithub.com-252Fapache-252Fincubator-2Dopenwhisk-
> >
252Fpull-252F3374-252Ffiles-2523diff-2D8f445fbdf6253dd176975ff6c629
> > def4R18-26data-3D02-257C01-257Ctnorris-2540adobe.com-
> >
257C605cc50c7a484ccb833708d5808bfe64-257Cfa7b1b5a7b34438794aed2c178
> > decee1-257C0-257C0-257C636556261107863657-26sdata-
> > 3Dtk8Des10hubLs7FNSgzDlsk1ibxDTIqSlXti-252FcAUyz0-253D-
> > 26reserved-3D0&d=DwIGaQ&c=uilaK90D4TOVoH58JNXRgQ&r=
> > F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=
> > LUthdew4Dt10vSAZSYRBbREqgwWk2PUWc4KDBJtt0uU&s=
> > 3UqWljTQjItMnzWhPrsfD1AF2IX6abtc9dYRfrxb2_M&e=
> > > >
> > > >>
> > > >
> > > >>
> > > >
> > > >> On Fri,
Mar 2, 2018 at
> 5:09
> > PM Tyson Norris <[email protected]>
> > > >
> > > >> wrote:
> > > >
> > > >>
> > > >
> > > >>> Check your
> marathon/dcos
> > service config to verify what image is used, and
> > > >
> > > >>> that you
have the
> latest
> > image pulled?
> > > >
> > > >>>
> > > >
> > > >>> The
default should be
> > openwhisk/controller - but I see that universe
> > > >
> > > >>> package
marathon
> config is
> > not set to force pull, so if you are using that
> > > >
> > > >>> image,
make sure you
> have
> > pulled the latest manually (or change the config
> > > >
> > > >>> to force
pull in
> > dcos/marathon ui).
> > > >
> > > >>>
> > > >
> > > >>> Tyson
> > > >
> > > >>>
> > > >
> > > >>>> On Mar
2, 2018, at
> 12:45
> > PM, Kumar Subramanian <[email protected]>
> > > >
> > > >>> wrote:
> > > >
> > > >>>>
> > > >
> > > >>>> Hi,
> > > >
> > > >>>> I have
installed the
> > following in DCOS successfully:
> > > >
> > > >>>> 1.
Apigateway
> > > >
> > > >>>> 2.
Exhibitor-dcos
> > > >
> > > >>>> 3. Kafka
(name given
> is
> > mykafka at the time of installation)
> > > >
> > > >>>> 4.
Whisk-couchdb
> > > >
> > > >>>> 5. Consul
> > > >
> > > >>>> 6.
Registrator
> > > >
> > > >>>>
> > > >
> > > >>>> Eror
when deploying
> > Whisk-Controller in DCOS:
> > > >
> > > >>>> When I
tried to deploy
> > whisk-controller with default settings, then the
> > > >
> > > >>> service
fails to
> deploy (it
> > just kills and redploys the service
> > > >
> > > >>>
continuously on its
> own when
> > deploying)
> > > >
> > > >>>>
> > > >
> > > >>>> Here is
the content
> in the
> > Error and Output
> > > >
> > > >>>>
> > > >
> > > >>>> STDERR:
> > > >
> > > >>>> (AT
BEGINNING OF FILE)
> > > >
> > > >>>> I0302
20:38:35.176177
> 19822
> > exec.cpp:162] Version: 1.2.3
> > > >
> > > >>>> I0302
20:38:35.180703
> 19824
> > exec.cpp:237] Executor registered on agent
> > > >
> > > >>>
> 995020e0-5129-44a3-8cf4-
> > 65900838b3af-S6
> > > >
> > > >>>> docker:
Error
> response from
> > daemon: Container command 'init.sh' not
> > > >
> > > >>> found or
does not
> exist..
> > > >
> > > >>>>
> > > >
> > > >>>> OUTPUT:
> > > >
> > > >>>> (AT
BEGINNING OF FILE)
> > > >
> > > >>>>
Registered docker
> executor
> > on 10.0.6.55
> > > >
> > > >>>> Starting
task
> > whisk-controller.adb62c44-1e59-11e8-8754-3afdc003616b
> > > >
> > > >>>>
> > > >
> > > >>>> Can you
please
> provide your
> > valuable inputs on how to get
> > > >
> > > >>>
whisk-controller
> deployed in
> > dcos?
> > > >
> > > >>>>
> > > >
> > > >>>> Thanks,
> > > >
> > > >>>> Kumar.
> > > >
> > > >>>>
> > > >
> > > >>>
> > > >
> > > >>>
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
