Also, Can you please attach the OPENWHISK_UNIVERSE file you are using (as 
repository)?

When I tried to install Kakfka (installed packages one by one using the make 
commands in your readme file); I still get the same pattern where the 
configuration of kafka contains "KAFKA_STATSD_URI": 
http://downloads.mesosphere.com/kafka/assets/kafka-statsd-metrics2-0.5.3.jar . 
This needs to be “https” instaead of “http”. Also some of the environment 
variables are missing like 
DB_WHISK_ACTIVATIONS,KAFKA_HOSTS,CONTROLLER_INSTANCES,
CONTROLLER_LOCALBOOKKEEPING,AKKA_CLUSTER_SEED_NODES etc….

Is there a way to fix it through your scripts instead of me manually editing? 
(through configs?)

Thanks,
Kumar.

On 3/7/18, 1:06 PM, "Kumar Subramanian" <kumarsubr...@vmware.com> wrote:

    Just consolidating the questions <<below>>
    
    On 3/7/18, 11:56 AM, "Kumar Subramanian" <kumarsubr...@vmware.com> wrote:
    
        Hi Duy,
        I was able to install the api gateway by calling make api-gateway. But, 
it was not straight forward. The api-gateway was in the waiting state for a 
long time. I had to suspend the deployment; set the acceptedRoles to null and 
restart the deployment then it worked (please see my earlier mails regarding 
probem with Api gateway installation)
        
        Question: 
    1) What should be the APIGATEWAY_DNS value? It is needed to install the 
next packages.
    2) You mentioned “make sure Route53 record was set up correctly” in README 
. What should be done to verify it? Can you please give me step by step 
instructions on how to verify it?
        
        Thanks,
        Kumar.
        
        On 3/7/18, 11:15 AM, "Kumar Subramanian" <kumarsubr...@vmware.com> 
wrote:
        
            Hi Duy,
            One your instructions at 
https://github.com/duynguyen/incubator-openwhisk-deploy-mesos/tree/dcos-universe/dcos-deploy-script
            
            You mention “make sure Route53 record was set up correctly” . What 
should be done to verify it? Can you please give me step by step instructions 
on how to verify it?
            
            Thanks,
            Kumar.
            
            On 3/7/18, 10:52 AM, "Kumar Subramanian" <kumarsubr...@vmware.com> 
wrote:
            
                Hi Duy,
                I got your PR on my local MAC. I have a dcos cluster on remote 
machines. What are the instructions to deploy openwhisk to this dcos cluster?
                 
                Thanks,
                Kumar.
                
                On 3/7/18, 1:38 AM, "Duy Nguyen" <duy.phngu...@gmail.com> wrote:
                
                    Kumar - The PR has not been merged yet. Could you pull the 
PR itself to try?
                    
https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_apache_incubator-2Dopenwhisk-2Ddeploy-2Dmesos_pull_2&d=DwIFaQ&c=uilaK90D4TOVoH58JNXRgQ&r=F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=afQz0NoScGRmefphc9MyV-bV9-5iIC7nrIHVkvZv8gM&s=8q_6zaOcuwSuhZ4IcwVYfBZL2SAx6Jf9NGoyYbitGp0&e=
                    
                    cheers,
                    Duy
                    
                    On Tue, Mar 6, 2018 at 7:45 PM, Kumar Subramanian 
<kumarsubr...@vmware.com>
                    wrote:
                    
                    > Hi Duy,
                    > I would love to try it.
                    >
                    > Is your changes in master? If so what’s master link?
                    >
                    > In the link 
https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_apache_incubator-2Dopenwhisk-2Ddeploy-2Dmesos&d=DwIFaQ&c=uilaK90D4TOVoH58JNXRgQ&r=F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=afQz0NoScGRmefphc9MyV-bV9-5iIC7nrIHVkvZv8gM&s=V6KK9cxXZORCCW_qK6d4qxaZC5vg-CajM4UQnusaP4c&e=
 I
                    > only see a license.txt file in it.
                    >
                    > Thanks,
                    > Kumar.
                    >
                    > On 3/6/18, 9:41 AM, "Duy Nguyen" <duy.phngu...@gmail.com> 
wrote:
                    >
                    >     Hi Kumar,
                    >
                    >     I have updated the universe to latest Openwhisk 
changes, verified it
                    > on a
                    >     vanilla DC/OS 1.11 cluster, and opened a PR at [1], 
do you mind trying
                    > it
                    >     out?
                    >     Hope it would solve bunch of issues you got earlier.
                    >
                    >     cheers,
                    >     Duy
                    >
                    >     [1] 
https://urldefense.proofpoint.com/v2/url?u=https-3A__github.
                    > 
com_apache_incubator-2Dopenwhisk-2Ddeploy-2Dmesos_pull_2&d=DwIFaQ&c=
                    > 
uilaK90D4TOVoH58JNXRgQ&r=F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=
                    > Wd0tt9Y6emKuk7HzgaeTCmlXjND8hGbhr2r-NAd74ug&s=
                    > 6lelXSxZQpZSLezJ62bqfqxgcZkF3SNgkzaFNM_qZGU&e=
                    >
                    >
                    >     On Tue, Mar 6, 2018 at 12:00 AM, Kumar Subramanian <
                    > kumarsubr...@vmware.com>
                    >     wrote:
                    >
                    >     > After I increased the timeout on the health checks 
I get the
                    > following
                    >     > [2018-03-05T22:58:34.042Z] [ERROR] [??] 
[KafkaMessagingProvider]
                    >     > ensureTopic for completed0 failed due to 
java.util.concurrent.
                    > ExecutionException:
                    >     > org.apache.kafka.common.errors.TimeoutException: 
Timed out waiting
                    > for a
                    >     > node assignment.
                    >     > [2018-03-05T22:58:34.044Z] [ERROR] [??] 
[Controller] failure during
                    >     > msgProvider.ensureTopic for topic completed0
                    >     > [INFO] [03/05/2018 22:58:34.070] 
[kamon-shutdown-hook-1]
                    >     > [CoordinatedShutdown(akka://kamon)] Starting 
coordinated shutdown
                    > from
                    >     > JVM shutdown hook
                    >     >
                    >     > On 3/5/18, 2:58 PM, "Kumar Subramanian" 
<kumarsubr...@vmware.com>
                    > wrote:
                    >     >
                    >     >     Hi Carlos/Tyson/Chetan,
                    >     >     Any Suggestions?
                    >     >
                    >     >     Note: I just tried to increase the timeout on 
the health checks
                    > …no
                    >     > luck.
                    >     >
                    >     >     Thanks,
                    >     >     Kumar.
                    >     >
                    >     >     On 3/5/18, 12:28 PM, "Kumar Subramanian" <
                    > kumarsubr...@vmware.com>
                    >     > wrote:
                    >     >
                    >     >         This is the output log
                    >     >         [2018-03-05T20:24:10.016Z] [INFO] 
Initializing Kamon...
                    >     >         [INFO] [03/05/2018 20:24:10.301] [main]
                    >     > [StatsDExtension(akka://kamon)] Starting the 
Kamon(StatsD) extension
                    >     >         [2018-03-05T20:24:10.352Z] [INFO] 
Slf4jLogger started
                    >     >         [2018-03-05T20:24:10.706Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for db.whisk.actions
                    >     >         [2018-03-05T20:24:10.707Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for db.protocol
                    >     >         [2018-03-05T20:24:10.708Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for limits.actions.sequence.maxLength
                    >     >         [2018-03-05T20:24:10.708Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for limits.triggers.fires.perMinute
                    >     >         [2018-03-05T20:24:10.708Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for akka.cluster.seed.nodes
                    >     >         [2018-03-05T20:24:10.709Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for limits.actions.invokes.concurrent
                    >     >         [2018-03-05T20:24:10.709Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for controller.instances
                    >     >         [2018-03-05T20:24:10.710Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for controller.localBookkeeping
                    >     >         [2018-03-05T20:24:10.710Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for whisk.version.date
                    >     >         [2018-03-05T20:24:10.710Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for db.port
                    >     >         [2018-03-05T20:24:10.711Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for whisk.version.buildno
                    >     >         [2018-03-05T20:24:10.711Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for db.whisk.activations
                    >     >         [2018-03-05T20:24:10.711Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for db.username
                    >     >         [2018-03-05T20:24:10.712Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for limits.actions.invokes.perMinute
                    >     >         [2018-03-05T20:24:10.712Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for db.whisk.auths
                    >     >         [2018-03-05T20:24:10.712Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for limits.actions.invokes.concurrentInSystem
                    >     >         [2018-03-05T20:24:10.712Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for runtimes.manifest
                    >     >         [2018-03-05T20:24:10.713Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for kafka.hosts
                    >     >         [2018-03-05T20:24:10.713Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for db.host
                    >     >         [2018-03-05T20:24:10.713Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for port
                    >     >         [2018-03-05T20:24:10.714Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for db.password
                    >     >         [2018-03-05T20:24:10.714Z] [INFO] [??] 
[Config] environment
                    > set
                    >     > value for db.provider
                    >     >         Received killTask for task 
whisk-controller.28d25d91-
                    >     > 20b3-11e8-8754-3afdc003616b
                    >     >         [INFO] [03/05/2018 20:25:38.974] 
[kamon-shutdown-hook-1]
                    >     > [CoordinatedShutdown(akka://kamon)] Starting 
coordinated shutdown
                    > from
                    >     > JVM shutdown hook
                    >     >         [2018-03-05T20:25:38.975Z] [INFO] Starting 
coordinated
                    > shutdown
                    >     > from JVM shutdown hook
                    >     >         [2018-03-05T20:25:38.982Z] [INFO] [??] 
[Controller] Shutting
                    > down
                    >     > Kamon with coordinated shutdown
                    >     >
                    >     >         ERROR_LOG
                    >     >         I0305 20:24:09.220711  1337 exec.cpp:162] 
Version: 1.2.3
                    >     >         I0305 20:24:09.227144  1338 exec.cpp:237] 
Executor
                    > registered on
                    >     > agent 995020e0-5129-44a3-8cf4-65900838b3af-S7
                    >     >         W0305 20:24:09.227144  1341 logging.cpp:91] 
RAW: Received
                    > signal
                    >     > SIGTERM from process 10243 of user 0; exiting
                    >     >
                    >     >         On 3/5/18, 12:24 PM, "Kumar Subramanian" <
                    > kumarsubr...@vmware.com>
                    >     > wrote:
                    >     >
                    >     >             I get the following error while in the 
deploying state
                    > (then
                    >     > kills it automatically and re-installs and goes on…)
                    >     >             Task was killed since health check 
failed. Reason:
                    >     > ConnectionAttemptFailedException: Connection 
attempt to
                    >     > <whisk_controller_ip>>:8888 failed
                    >     >
                    >     >
                    >     >
                    >     >             On 3/5/18, 12:21 PM, "Kumar 
Subramanian" <
                    >     > kumarsubr...@vmware.com> wrote:
                    >     >
                    >     >                 Gave the value as 
mykafka.marathon.mesos:9092…it
                    > seems to
                    >     > be going forward now with the deployment…hope it 
succeeds
                    >     >
                    >     >                 On 3/5/18, 12:13 PM, "Kumar 
Subramanian" <
                    >     > kumarsubr...@vmware.com> wrote:
                    >     >
                    >     >                     Hi Chetan,
                    >     >                     I resolved all the settings 
(not sure about some
                    > those
                    >     > values set)….now I’m getting the following error
                    >     >                     I0305 20:07:00.341622 21216 
exec.cpp:162]
                    > Version:
                    >     > 1.2.3
                    >     >                     I0305 20:07:00.347102 21224 
exec.cpp:237]
                    > Executor
                    >     > registered on agent 
995020e0-5129-44a3-8cf4-65900838b3af-S4
                    >     >                     Exception in thread "main"
                    > org.apache.kafka.common.KafkaException:
                    >     > Failed create new KafkaAdminClient
                    >     >                         at org.apache.kafka.clients.
                    >     > 
admin.KafkaAdminClient.createInternal(KafkaAdminClient.java:322)
                    >     >                         at org.apache.kafka.clients.
                    >     > admin.AdminClient.create(AdminClient.java:50)
                    >     >                         at whisk.connector.kafka.
                    > KafkaMessagingProvider$.
                    >     > ensureTopic(KafkaMessagingProvider.scala:70)
                    >     >                         at whisk.core.controller.
                    >     > Controller$.main(Controller.scala:217)
                    >     >                         at whisk.core.controller.
                    >     > Controller.main(Controller.scala)
                    >     >                     Caused by: 
org.apache.kafka.common.
                    > config.ConfigException:
                    >     > No resolvable bootstrap urls given in 
bootstrap.servers
                    >     >                         at 
org.apache.kafka.clients.ClientUtils.
                    >     > parseAndValidateAddresses(ClientUtils.java:64)
                    >     >                         at org.apache.kafka.clients.
                    >     > 
admin.KafkaAdminClient.<init>(KafkaAdminClient.java:345)
                    >     >                         at org.apache.kafka.clients.
                    >     > 
admin.KafkaAdminClient.createInternal(KafkaAdminClient.java:315)
                    >     >                         ... 4 more
                    >     >                     <<WHISK_CONTROLLER ENVIRONMENT 
SETTINGS>>
                    >     >                     The config environment values 
are:
                    >     >                     "KAFKA_HOST": 
"broker-0.kafka.mesos"
                    >     >                     "KAFKA_HOSTS": 
"mykafka.docker:9092"
                    >     >
                    >     >
                    >     >                     Here is the Kakfka service in 
my dcos services
                    >     >                     <<KAFKA_SERVICE>>
                    >     >                     ID: 
mykafka.654fa8cd-1e56-11e8-8754-3afdc003616b
                    >     >                     Name: mykafka
                    >     >                     Address: <<internal_ip>>
                    >     >                     Status: Running
                    >     >
                    >     >                     On 3/5/18, 12:01 PM, "Kumar 
Subramanian" <
                    >     > kumarsubr...@vmware.com> wrote:
                    >     >
                    >     >                         Also what is 
DB_WHISK_ACTIVATIONS=local_
                    > activations,
                    >     > what does it mean by “local” activations? This 
setting is also
                    > needed, what
                    >     > should the value be in my dcos env? Should it still 
be
                    > local_activations?
                    >     >
                    >     >                         On 3/5/18, 11:48 AM, "Kumar 
Subramanian" <
                    >     > kumarsubr...@vmware.com> wrote:
                    >     >
                    >     >                             Thanks Chetan, I added 
that now I’m
                    > getting the
                    >     >
                    >     >                             
[2018-03-05T19:43:45.025Z] [ERROR] [??]
                    >     > [Config] required property kafka.hosts still not set
                    >     >
                    >     >                             what is kafka.hosts is 
that the kafka
                    > host
                    >     > name? (as in mykafka…that;s the kafka name I gave 
when I installed
                    > kakfa).
                    >     > Should it be just the name or is FQDN ?
                    >     >
                    >     >
                    >     >                             On 3/5/18, 11:32 AM, 
"Chetan Mehrotra" <
                    >     > chetan.mehro...@gmail.com> wrote:
                    >     >
                    >     >                                 > required property
                    > controller.instances
                    >     > still not set
                    >     >
                    >     >                                 Looks like some 
configs are missing.
                    > You
                    >     > would need to this or few
                    >     >                                 more props. The 
configs are generally
                    >     > managed via Ansible for default
                    >     >                                 setup. For dcos you 
may need to
                    > configure
                    >     > them explicitly. You can see
                    >     >                                 various configs and 
there values as
                    > an
                    >     > example at [1]
                    >     >                                 
(controller.instances becomes
                    >     > CONTROLLER_INSTANCES). They would need
                    >     >                                 to be tweaked as 
per your setup
                    > though
                    >     >
                    >     >                                 Chetan Mehrotra
                    >     >                                 [1] 
https://urldefense.proofpoint.com/v2/url?u=https-3A__urldefense.proofpoint&d=DwIFaQ&c=uilaK90D4TOVoH58JNXRgQ&r=F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=afQz0NoScGRmefphc9MyV-bV9-5iIC7nrIHVkvZv8gM&s=krGGBEv7Z5rMpichLLcCKYj4GYHLFGSXDB7se_zq9t8&e=.
                    > com/v2/url?u=https-3A__urldefense.proofpoint&d=DwIFaQ&c=
                    > 
uilaK90D4TOVoH58JNXRgQ&r=F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=
                    > 
Wd0tt9Y6emKuk7HzgaeTCmlXjND8hGbhr2r-NAd74ug&s=hoaE2rcIjVS-9GdlR2d-
                    > rNVCuHc4I3L3hG3J5MxHMss&e=.
                    >     > com/v2/url?u=https-3A__github.com_apache_incubator-
                    >     > 2Dopenwhisk-2Ddevtools_blob_master_docker-2Dcompose_
                    >     > 
docker-2Dwhisk-2Dcontroller.env&d=DwIFaQ&c=uilaK90D4TOVoH58JNXRgQ&r=
                    >     > F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=
                    > K8Rzl5BrVqOWFx5b1fYG8EjdY-
                    >     > 
6JVyi-x_eMD0thaKY&s=VfbixlUG4tFbgBNxiMr-KCNJOakmlGuNcnXLlbQMrVY&e=
                    >     >
                    >     >
                    >     >                                 On Tue, Mar 6, 2018 
at 12:09 AM,
                    > Kumar
                    >     > Subramanian
                    >     >                                 
<kumarsubr...@vmware.com> wrote:
                    >     >                                 > Hi,
                    >     >                                 > I was able to 
successfully do the
                    >     > following
                    >     >                                 > 1) Build the 
Controller image
                    >     >                                 > 2) Push the image
                    >     >                                 >
                    >     >                                 > However when I 
installed the
                    > controller
                    >     > package it gives me the following error in the 
output; then it shuts
                    > down
                    >     > and retries the installation (goes on…)
                    >     >                                 >
                    >     >                                 > Registered docker 
executor on
                    > 10.0.6.13
                    >     >                                 > Starting task
                    > whisk-controller.a46ae612-
                    >     > 20a2-11e8-8754-3afdc003616b
                    >     >                                 > 
[2018-03-05T18:25:55.853Z] [INFO]
                    >     > Initializing Kamon...
                    >     >                                 > [INFO] 
[03/05/2018 18:25:56.151]
                    > [main]
                    >     > [StatsDExtension(akka://kamon)] Starting the 
Kamon(StatsD) extension
                    >     >                                 > 
[2018-03-05T18:25:56.193Z] [INFO]
                    >     > Slf4jLogger started
                    >     >                                 > 
[2018-03-05T18:25:56.552Z] [INFO]
                    > [??]
                    >     > [Config] environment set value for db.whisk.actions
                    >     >                                 > 
[2018-03-05T18:25:56.554Z] [INFO]
                    > [??]
                    >     > [Config] environment set value for db.protocol
                    >     >                                 > 
[2018-03-05T18:25:56.554Z] [INFO]
                    > [??]
                    >     > [Config] environment set value for 
limits.triggers.fires.perMinute
                    >     >                                 > 
[2018-03-05T18:25:56.554Z] [INFO]
                    > [??]
                    >     > [Config] environment set value for 
limits.actions.invokes.concurrent
                    >     >                                 > 
[2018-03-05T18:25:56.555Z] [INFO]
                    > [??]
                    >     > [Config] environment set value for 
whisk.version.date
                    >     >                                 > 
[2018-03-05T18:25:56.555Z] [INFO]
                    > [??]
                    >     > [Config] environment set value for db.port
                    >     >                                 > 
[2018-03-05T18:25:56.555Z] [INFO]
                    > [??]
                    >     > [Config] environment set value for 
whisk.version.buildno
                    >     >                                 > 
[2018-03-05T18:25:56.556Z] [INFO]
                    > [??]
                    >     > [Config] environment set value for db.username
                    >     >                                 > 
[2018-03-05T18:25:56.556Z] [INFO]
                    > [??]
                    >     > [Config] environment set value for 
limits.actions.invokes.perMinute
                    >     >                                 > 
[2018-03-05T18:25:56.556Z] [INFO]
                    > [??]
                    >     > [Config] environment set value for db.whisk.auths
                    >     >                                 > 
[2018-03-05T18:25:56.556Z] [INFO]
                    > [??]
                    >     > [Config] environment set value for 
limits.actions.invokes.
                    >     > concurrentInSystem
                    >     >                                 > 
[2018-03-05T18:25:56.557Z] [INFO]
                    > [??]
                    >     > [Config] environment set value for runtimes.manifest
                    >     >                                 > 
[2018-03-05T18:25:56.557Z] [INFO]
                    > [??]
                    >     > [Config] environment set value for db.host
                    >     >                                 > 
[2018-03-05T18:25:56.558Z] [INFO]
                    > [??]
                    >     > [Config] environment set value for port
                    >     >                                 > 
[2018-03-05T18:25:56.558Z] [INFO]
                    > [??]
                    >     > [Config] environment set value for db.password
                    >     >                                 > 
[2018-03-05T18:25:56.558Z] [INFO]
                    > [??]
                    >     > [Config] environment set value for db.provider
                    >     >                                 > 
[2018-03-05T18:25:56.561Z] [ERROR]
                    > [??]
                    >     > [Config] required property controller.instances 
still not set
                    >     >                                 > 
[2018-03-05T18:25:56.561Z] [ERROR]
                    > [??]
                    >     > [Controller] Bad configuration, cannot start.
                    >     >                                 >
                    >     >                                 > Any suggestions?
                    >     >                                 >
                    >     >                                 >
                    >     >                                 > On 3/2/18, 4:05 
PM, "Kumar
                    > Subramanian" <
                    >     > kumarsubr...@vmware.com> wrote:
                    >     >                                 >
                    >     >                                 >     This is the 
error I get when I
                    > did
                    >     > docker build (for Controller)
                    >     >                                 >
                    >     >                                 >     Step 1/7 : 
FROM scala
                    >     >                                 >     repository 
scala not found:
                    > does not
                    >     > exist or no pull access
                    >     >                                 >
                    >     >                                 >
                    >     >                                 >     Any 
Suggestions?
                    >     >                                 >
                    >     >                                 >     On 3/2/18, 
3:34 PM, "Carlos
                    > Santana"
                    >     > <csantan...@gmail.com> wrote:
                    >     >                                 >
                    >     >                                 >         No that 
it’s still in PR
                    >     >                                 >
                    >     >                                 >         Just pull 
the changes
                    > locally
                    >     > and build
                    >     >                                 >
                    >     >                                 >         - Carlos 
Santana
                    >     >                                 >         
@csantanapr
                    >     >                                 >
                    >     >                                 >         > On Mar 
2, 2018, at 6:20
                    > PM,
                    >     > Kumar Subramanian <kumarsubr...@vmware.com> wrote:
                    >     >                                 >         >
                    >     >                                 >         > Is that 
change at
                    >     > 
https://urldefense.proofpoint.com/v2/url?u=https-3A__github.
                    >     > com_chetanmeh_incubator-2Dopenwhisk_blob_
                    > fa302249f4f9b4e6b3084956f18bda
                    >     > 987674f46f_core_controller_Dockerfile&d=DwIFaQ&c=
                    > uilaK90D4TOVoH58JNXRgQ&r=
                    >     > 
F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=nLubLAFijdQ4pOPqIydDI_
                    >     > wguMgbdmdmoMXcP7g-m8k&s=0_zv4jTDip5Uk9oBB5-6Ka_
                    > Iug3KYWIhy7qzSDryqM0&e=
                    >     > not merged? I don’t see change in master
                    > https://urldefense.proofpoint.com/v2/url?u=https-3A__
                    > urldefense.proofpoint&d=DwIFaQ&c=uilaK90D4TOVoH58JNXRgQ&r=
                    > F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=
                    > 
Wd0tt9Y6emKuk7HzgaeTCmlXjND8hGbhr2r-NAd74ug&s=hoaE2rcIjVS-9GdlR2d-
                    > rNVCuHc4I3L3hG3J5MxHMss&e=.
                    >     > com/v2/url?u=https-3A__github.com_apache_incubator-
                    >     > 
2Dopenwhisk_blob_master_core_controller_Dockerfile&d=DwIFaQ&c=
                    >     > 
uilaK90D4TOVoH58JNXRgQ&r=F5C8fYlpBJ270qrdwLq2iRQrPd1CLa
                    > p8zItxk8laWpo&m=
                    >     > 
nLubLAFijdQ4pOPqIydDI_wguMgbdmdmoMXcP7g-m8k&s=TdB-IjihM3-
                    >     > 0dqBF029dSMkoWbZHBAUXXqeDjfQMlhg&e=
                    >     >                                 >         >
                    >     >                                 >         > Thanks,
                    >     >                                 >         > Kumar.
                    >     >                                 >         >
                    >     >                                 >         > On 
3/2/18, 2:59 PM,
                    > "Kumar
                    >     > Subramanian" <kumarsubr...@vmware.com> wrote:
                    >     >                                 >         >
                    >     >                                 >         >    Ok, 
I will try to
                    > build the
                    >     > controller image and see. Will keep you posted.
                    >     >                                 >         >
                    >     >                                 >         >    On 
3/2/18, 2:39 PM,
                    > "Tyson
                    >     > Norris" <tnor...@adobe.com.INVALID> wrote:
                    >     >                                 >         >
                    >     >                                 >         >        
Thanks Carlos - I
                    > think
                    >     > you’re right.
                    >     >                                 >         >
                    >     >                                 >         >
                    >     >                                 >         >
                    >     >                                 >         >        
Kumar you can
                    > either
                    >     > build the controller image with that PR, or else 
you should be able
                    > to
                    >     > manually set the docker cmd, e.g. /bin/sh -c \"exec 
/init.sh 0 >>
                    >     > /dev/stdout\” on the dcos service for controller;
                    >     >                                 >         >
                    >     >                                 >         >
                    >     >                                 >         >
                    >     >                                 >         >        
I think you will
                    > have
                    >     > similar issue with invoker, mostly because this 
universe is far out
                    > of date
                    >     > from current openwhisk images.
                    >     >                                 >         >
                    >     >                                 >         >
                    >     >                                 >         >
                    >     >                                 >         >        
For invoker can
                    > you use
                    >     > the docker cmd as /bin/sh -c \"exec /init.sh --name 
$LIBPROCESS_IP >>
                    >     > /dev/stdout\”
                    >     >                                 >         >
                    >     >                                 >         >
                    >     >                                 >         >
                    >     >                                 >         >        
Additionally, the
                    > env
                    >     > vars (both invoker and controller) have changed 
substantially, so I
                    > would
                    >     > expect a few hiccups there as well.
                    >     >                                 >         >
                    >     >                                 >         >
                    >     >                                 >         >
                    >     >                                 >         >        
We are working on
                    >     > getting updates to the universe so that our 
internal deployment
                    > details are
                    >     > not included, and it will actually work with recent 
openwhisk images
                    > (and
                    >     > stay working) but haven’t gotten everything set 
just yet.
                    >     >                                 >         >
                    >     >                                 >         >
                    >     >                                 >         >
                    >     >                                 >         >        
Hope that helps
                    >     >                                 >         >
                    >     >                                 >         >        
Tyson
                    >     >                                 >         >
                    >     >                                 >         >
                    >     >                                 >         >
                    >     >                                 >         >>> On 
Mar 2, 2018, at
                    > 2:21 PM,
                    >     > Carlos Santana <csantan...@gmail.com> wrote:
                    >     >                                 >         >>
                    >     >                                 >         >>
                    >     >                                 >         >
                    >     >                                 >         >> Maybe 
for the init.sh
                    > this PR
                    >     > is related
                    >     >                                 >         >
                    >     >                                 >         >>
                    >     > 
https://urldefense.proofpoint.com/v2/url?u=https-3A__na01.
                    >     > 
safelinks.protection.outlook.com_-3Furl-3Dhttps-253A-252F-
                    >     > 252Fgithub.com-252Fapache-252Fincubator-2Dopenwhisk-
                    >     > 
252Fpull-252F3374-252Ffiles-2523diff-2D8f445fbdf6253dd176975ff6c629
                    >     > 
def4R18-26data-3D02-257C01-257Ctnorris-2540adobe.com-
                    >     > 
257C605cc50c7a484ccb833708d5808bfe64-257Cfa7b1b5a7b34438794aed2c178
                    >     > decee1-257C0-257C0-257C636556261107863657-26sdata-
                    >     > 
3Dtk8Des10hubLs7FNSgzDlsk1ibxDTIqSlXti-252FcAUyz0-253D-
                    >     > 26reserved-3D0&d=DwIGaQ&c=uilaK90D4TOVoH58JNXRgQ&r=
                    >     > F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=
                    >     > LUthdew4Dt10vSAZSYRBbREqgwWk2PUWc4KDBJtt0uU&s=
                    >     > 3UqWljTQjItMnzWhPrsfD1AF2IX6abtc9dYRfrxb2_M&e=
                    >     >                                 >         >
                    >     >                                 >         >>
                    >     >                                 >         >
                    >     >                                 >         >>
                    >     >                                 >         >
                    >     >                                 >         >> On 
Fri, Mar 2, 2018 at
                    > 5:09
                    >     > PM Tyson Norris <tnor...@adobe.com.invalid>
                    >     >                                 >         >
                    >     >                                 >         >> wrote:
                    >     >                                 >         >
                    >     >                                 >         >>
                    >     >                                 >         >
                    >     >                                 >         >>> Check 
your
                    > marathon/dcos
                    >     > service config to verify what image is used, and
                    >     >                                 >         >
                    >     >                                 >         >>> that 
you have the
                    > latest
                    >     > image pulled?
                    >     >                                 >         >
                    >     >                                 >         >>>
                    >     >                                 >         >
                    >     >                                 >         >>> The 
default should be
                    >     > openwhisk/controller - but I see that universe
                    >     >                                 >         >
                    >     >                                 >         >>> 
package marathon
                    > config is
                    >     > not set to force pull, so if you are using that
                    >     >                                 >         >
                    >     >                                 >         >>> 
image, make sure you
                    > have
                    >     > pulled the latest manually (or change the config
                    >     >                                 >         >
                    >     >                                 >         >>> to 
force pull in
                    >     > dcos/marathon ui).
                    >     >                                 >         >
                    >     >                                 >         >>>
                    >     >                                 >         >
                    >     >                                 >         >>> Tyson
                    >     >                                 >         >
                    >     >                                 >         >>>
                    >     >                                 >         >
                    >     >                                 >         >>>> On 
Mar 2, 2018, at
                    > 12:45
                    >     > PM, Kumar Subramanian <kumarsubr...@vmware.com>
                    >     >                                 >         >
                    >     >                                 >         >>> wrote:
                    >     >                                 >         >
                    >     >                                 >         >>>>
                    >     >                                 >         >
                    >     >                                 >         >>>> Hi,
                    >     >                                 >         >
                    >     >                                 >         >>>> I 
have installed the
                    >     > following in DCOS successfully:
                    >     >                                 >         >
                    >     >                                 >         >>>> 1. 
Apigateway
                    >     >                                 >         >
                    >     >                                 >         >>>> 2. 
Exhibitor-dcos
                    >     >                                 >         >
                    >     >                                 >         >>>> 3. 
Kafka (name given
                    > is
                    >     > mykafka at the time of installation)
                    >     >                                 >         >
                    >     >                                 >         >>>> 4. 
Whisk-couchdb
                    >     >                                 >         >
                    >     >                                 >         >>>> 5. 
Consul
                    >     >                                 >         >
                    >     >                                 >         >>>> 6. 
Registrator
                    >     >                                 >         >
                    >     >                                 >         >>>>
                    >     >                                 >         >
                    >     >                                 >         >>>> Eror 
when deploying
                    >     > Whisk-Controller in DCOS:
                    >     >                                 >         >
                    >     >                                 >         >>>> When 
I tried to deploy
                    >     > whisk-controller with default settings, then the
                    >     >                                 >         >
                    >     >                                 >         >>> 
service fails to
                    > deploy (it
                    >     > just kills and redploys the service
                    >     >                                 >         >
                    >     >                                 >         >>> 
continuously on its
                    > own when
                    >     > deploying)
                    >     >                                 >         >
                    >     >                                 >         >>>>
                    >     >                                 >         >
                    >     >                                 >         >>>> Here 
is the content
                    > in the
                    >     > Error and Output
                    >     >                                 >         >
                    >     >                                 >         >>>>
                    >     >                                 >         >
                    >     >                                 >         >>>> 
STDERR:
                    >     >                                 >         >
                    >     >                                 >         >>>> (AT 
BEGINNING OF FILE)
                    >     >                                 >         >
                    >     >                                 >         >>>> 
I0302 20:38:35.176177
                    > 19822
                    >     > exec.cpp:162] Version: 1.2.3
                    >     >                                 >         >
                    >     >                                 >         >>>> 
I0302 20:38:35.180703
                    > 19824
                    >     > exec.cpp:237] Executor registered on agent
                    >     >                                 >         >
                    >     >                                 >         >>>
                    > 995020e0-5129-44a3-8cf4-
                    >     > 65900838b3af-S6
                    >     >                                 >         >
                    >     >                                 >         >>>> 
docker: Error
                    > response from
                    >     > daemon: Container command 'init.sh' not
                    >     >                                 >         >
                    >     >                                 >         >>> found 
or does not
                    > exist..
                    >     >                                 >         >
                    >     >                                 >         >>>>
                    >     >                                 >         >
                    >     >                                 >         >>>> 
OUTPUT:
                    >     >                                 >         >
                    >     >                                 >         >>>> (AT 
BEGINNING OF FILE)
                    >     >                                 >         >
                    >     >                                 >         >>>> 
Registered docker
                    > executor
                    >     > on 10.0.6.55
                    >     >                                 >         >
                    >     >                                 >         >>>> 
Starting task
                    >     > 
whisk-controller.adb62c44-1e59-11e8-8754-3afdc003616b
                    >     >                                 >         >
                    >     >                                 >         >>>>
                    >     >                                 >         >
                    >     >                                 >         >>>> Can 
you please
                    > provide your
                    >     > valuable inputs on how to get
                    >     >                                 >         >
                    >     >                                 >         >>> 
whisk-controller
                    > deployed in
                    >     > dcos?
                    >     >                                 >         >
                    >     >                                 >         >>>>
                    >     >                                 >         >
                    >     >                                 >         >>>> 
Thanks,
                    >     >                                 >         >
                    >     >                                 >         >>>> 
Kumar.
                    >     >                                 >         >
                    >     >                                 >         >>>>
                    >     >                                 >         >
                    >     >                                 >         >>>
                    >     >                                 >         >
                    >     >                                 >         >>>
                    >     >                                 >         >
                    >     >                                 >         >
                    >     >                                 >         >
                    >     >                                 >         >
                    >     >                                 >         >
                    >     >                                 >         >
                    >     >                                 >         >
                    >     >                                 >
                    >     >                                 >
                    >     >                                 >
                    >     >                                 >
                    >     >
                    >     >
                    >     >
                    >     >
                    >     >
                    >     >
                    >     >
                    >     >
                    >     >
                    >     >
                    >     >
                    >     >
                    >     >
                    >     >
                    >     >
                    >     >
                    >     >
                    >
                    >
                    >
                    
                
                
            
            
        
        
    
    

Reply via email to