Actually, I don't think there is anything stopping -DAP_DEBUG from
coming through from the httpd config. The change that was made
(r357052) just stopped mod_perl from adding that itself when
MP_MAINTAINER is specified.
But maybe we do need to filter out -DAP_DEBUG?
Or else stop using ap_strchr() and just use strchr() directly?
Could you try the latter, since it seems like an easy fix? -- Change
the one instance of ap_strchr() in xs/Apache2/Module/Apache2__Module.h
to be strchr() instead and then rebuild. Does that make the problem go
away?
On 9 April 2015 at 18:16, Steve Hay <steve.m....@googlemail.com> wrote:
> Can you see where the -DAP_DEBUG comes from, e.g. by grepping
> /usr/local/httpd-2.4.12/bin/ap* for AP_DEBUG?
>
> I think that symbol is not supposed to find its way into the mod_perl
> build options, but it's obviously getting picked up somewhere and
> slipping through...
>
>
> On 9 April 2015 at 15:05, Jie Gao <j....@sydney.edu.au> wrote:
>> Hi Steve
>>
>> httpd is configured with "--enable-maintainer-mode".
>>
>> For mod_perl:
>>
>> /usr/local/bin/perl Makefile.PL MP_APXS=/usr/local/httpd-2.4.12/bin/apxs
>> MP_APR_CONFIG=/usr/local/httpd-2.4.12/bin/apr-1-config
>>
>> and I found the following line in the resultant Makefile:
>>
>> CCFLAGS = -D_REENTRANT -D_GNU_SOURCE -fPIC -fwrapv -fno-strict-aliasing
>> -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE
>> -D_FILE_OFFSET_BITS=64 -DMOD_PERL -DMP_COMPAT_1X -DLINUX -D_REENTRANT
>> -D_GNU_SOURCE -DAP_DEBUG
>>
>>
>>
>> Regards,
>>
>> Jie
>>
>> * Steve Hay <steve.m....@googlemail.com> wrote:
>>
>>> Date: Thu, 9 Apr 2015 14:29:44 +0100
>>> From: Steve Hay <steve.m....@googlemail.com>
>>> To: Jie Gao <j....@sydney.edu.au>
>>> CC: "modp...@perl.apache.org" <modp...@perl.apache.org>, mod_perl Dev
>>> <dev@perl.apache.org>
>>> Subject: Re: Trunk: APR.so won't load
>>>
>>> Sorry for the slow reply.
>>>
>>> I cannot reproduce the problem here on Windows. Your example module
>>> loads up fine with all the "use APR" lines uncommented.
>>>
>>> The build system (and the means by which APR::* should be loadable
>>> without mod_perl.so being loaded) is different on Windows, but I did
>>> notice this:
>>>
>>> ap_strchr seems to only be used in xs\Apache2\Module\Apache2__Module.h
>>> but when I run Module.c through the preprocessor I find that ap_strchr
>>> gets changed to strchr, and the latter is simply imported from the C
>>> run-time library.
>>>
>>> I guess that's down to this code in httpd.h:
>>>
>>> #ifdef AP_DEBUG
>>>
>>> #undef strchr
>>> # define strchr(s, c) ap_strchr(s,c)
>>> #undef strrchr
>>> # define strrchr(s, c) ap_strrchr(s,c)
>>> #undef strstr
>>> # define strstr(s, c) ap_strstr(s,c)
>>>
>>> #else
>>>
>>> /** use this instead of strchr */
>>> # define ap_strchr(s, c) strchr(s, c)
>>> /** use this instead of strchr */
>>> # define ap_strchr_c(s, c) strchr(s, c)
>>> /** use this instead of strrchr */
>>> # define ap_strrchr(s, c) strrchr(s, c)
>>> /** use this instead of strrchr */
>>> # define ap_strrchr_c(s, c) strrchr(s, c)
>>> /** use this instead of strrstr*/
>>> # define ap_strstr(s, c) strstr(s, c)
>>> /** use this instead of strrstr*/
>>> # define ap_strstr_c(s, c) strstr(s, c)
>>>
>>> #endif
>>>
>>> so presumably I do not have AP_DEBUG defined for my build (even though
>>> it was a debug build).
>>>
>>> It looks like AP_DEBUG should not be defined, even in maintainer mode,
>>> according to an old Changes entry:
>>>
>>> remove -DAP_HAVE_DESIGNATED_INITIALIZER and -DAP_DEBUG from
>>> MP_MAINTAINER mode to avoid collisions [Joe Orton]
>>>
>>> but do you somehow have AP_DEBUG defined somewhere, which causes the
>>> replacement of ap_strchr with strchr to not happen for you?
>>>
>>>
>>> On 27 March 2015 at 09:14, Jie Gao <j....@sydney.edu.au> wrote:
>>> > Hi All
>>> >
>>> > I had some more time looking into this, and here's some info I can
>>> > provide.
>>> >
>>> > --------------------------------------------------------------------------
>>> >
>>> > # readelf -a
>>> > /usr/local/lib/perl5/site_perl/5.20.2/x86_64-linux-thread-multi/auto/APR/APR.so
>>> > ELF Header:
>>> > Magic: 7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00
>>> > Class: ELF64
>>> > Data: 2's complement, little endian
>>> > Version: 1 (current)
>>> > OS/ABI: UNIX - System V
>>> > ABI Version: 0
>>> > Type: DYN (Shared object file)
>>> > Machine: Advanced Micro Devices X86-64
>>> > Version: 0x1
>>> > Entry point address: 0x1cb0
>>> > Start of program headers: 64 (bytes into file)
>>> > Start of section headers: 15480 (bytes into file)
>>> > Flags: 0x0
>>> > Size of this header: 64 (bytes)
>>> > Size of program headers: 56 (bytes)
>>> > Number of program headers: 6
>>> > Size of section headers: 64 (bytes)
>>> > Number of section headers: 29
>>> > Section header string table index: 26
>>> >
>>> > Section Headers:
>>> > [Nr] Name Type Address Offset
>>> > Size EntSize Flags Link Info Align
>>> > [ 0] NULL 0000000000000000 00000000
>>> > 0000000000000000 0000000000000000 0 0 0
>>> >
>>> > [ Lines removed for clarity ]
>>> >
>>> > Dynamic section at offset 0x36f8 contains 27 entries:
>>> > Tag Type Name/Value
>>> > 0x0000000000000001 (NEEDED) Shared library:
>>> > [libaprutil-1.so.0]
>>> > 0x0000000000000001 (NEEDED) Shared library: [libexpat.so.1]
>>> > 0x0000000000000001 (NEEDED) Shared library: [libapr-1.so.0]
>>> > 0x0000000000000001 (NEEDED) Shared library: [librt.so.1]
>>> > 0x0000000000000001 (NEEDED) Shared library: [libcrypt.so.1]
>>> > 0x0000000000000001 (NEEDED) Shared library: [libpthread.so.0]
>>> > 0x0000000000000001 (NEEDED) Shared library: [libc.so.6]
>>> > 0x000000000000000f (RPATH) Library rpath:
>>> > [/usr/local/httpd-2.4.12/lib:/lib/../lib64]
>>> >
>>> > [ Lines removed for clarity ]
>>> >
>>> > Relocation section '.rela.plt' at offset 0x1300 contains 61 entries:
>>> > Offset Info Type Sym. Value Sym. Name +
>>> > Addend
>>> > 000000203930 000200000007 R_X86_64_JUMP_SLO 0000000000000000 Perl_mg_get
>>> > + 0
>>> > 000000203938 000300000007 R_X86_64_JUMP_SLO 0000000000000000
>>> > Perl_sv_setiv + 0
>>> > 000000203940 000400000007 R_X86_64_JUMP_SLO 0000000000000000
>>> > Perl_sv_bless + 0
>>> > 000000203948 000500000007 R_X86_64_JUMP_SLO 0000000000000000
>>> > apr_strerror + 0
>>> > 000000203950 000600000007 R_X86_64_JUMP_SLO 0000000000000000
>>> > Perl_require_pv + 0
>>> > 000000203958 000700000007 R_X86_64_JUMP_SLO 0000000000000000 Perl_warn + >>> > 0
>>> > 000000203960 000800000007 R_X86_64_JUMP_SLO 0000000000000000
>>> > PerlIO_printf + 0
>>> > 000000203968 000900000007 R_X86_64_JUMP_SLO 0000000000000000 ap_strchr + >>> > 0
>>> >
>>> > [ Lines removed for clarity ]
>>> >
>>> > Symbol table '.dynsym' contains 86 entries:
>>> > Num: Value Size Type Bind Vis Ndx Name
>>> > 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
>>> > 1: 00000000000018b8 0 SECTION LOCAL DEFAULT 9
>>> > 2: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND Perl_mg_get
>>> > 3: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND Perl_sv_setiv
>>> > 4: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND Perl_sv_bless
>>> > 5: 0000000000000000 0 FUNC GLOBAL DEFAULT UND apr_strerror
>>> > 6: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND Perl_require_pv
>>> > 7: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND Perl_warn
>>> > 8: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND PerlIO_printf
>>> > 9: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND ap_strchr
>>> >
>>> >
>>> > [ Lines removed for clarity ]
>>> >
>>> > Symbol table '.symtab' contains 143 entries:
>>> > Num: Value Size Type Bind Vis Ndx Name
>>> > 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
>>> > 1: 0000000000000190 0 SECTION LOCAL DEFAULT 1
>>> >
>>> > [ Lines removed for clarity ]
>>> >
>>> > 69: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND ap_strchr
>>> >
>>> >
>>> > [ Lines removed for clarity ]
>>> >
>>> > --------------------------------------------------------------------------
>>> >
>>> > It seems that ap_strchr is not defined anywhere outside httpd, and not in
>>> > any of the shared libs. This seems to create the problem when building
>>> > a module with mod_perl or outside the mod_perl source.
>>> >
>>> > I find a somewhat related change by Stas in the past in the Changes file:
>>> >
>>> > bug reports generating code: [Stas]
>>> > - add (apr|apu)-config linking info
>>> > - show the full path to the config file used to get the data for the
>>> > report
>>> >
>>> > The APR and APR::* family of modules can now be used without having
>>> > to load mod_perl.so. On *nix, this is done by compiling the needed
>>> > functions from the appropriate sources used to build mod_perl.so
>>> > into APR.so, and then arranging for APR::* to 'use APR ()'. On Win32,
>>> > a static library of needed functions is built, and APR/APR::*
>>> > then link into this library [Stas, Joe Schaefer, Randy Kobes]
>>> >
>>> >
>>> > I hope this helps resolve this issue in any way.
>>> >
>>> >
>>> >
>>> >
>>> >
>>> > Regards,
>>> >
>>> > Jie
>>> >
>>> > * Jie Gao <j....@sydney.edu.au> wrote:
>>> >
>>> >> Date: Sun, 1 Mar 2015 17:30:45 +1100
>>> >> From: Jie Gao <j....@sydney.edu.au>
>>> >> To: "modp...@perl.apache.org" <modp...@perl.apache.org>, mod_perl Dev
>>> >> <dev@perl.apache.org>
>>> >> Subject: Trunk: APR.so won't load
>>> >> User-Agent: Mutt/1.5.21 (2010-09-15)
>>> >>
>>> >> I have got the source code from the trunk, "make test" mostly passed
>>> >> except for
>>> >> a threading issue, but I installed it anyway.
>>> >>
>>> >> Tried to load a test module, but it fails with the following error:
>>> >>
>>> >> # Error: Can't load
>>> >> '/usr/local/lib/perl5/site_perl/5.20.2/x86_64-linux-thread-multi/auto/APR/APR.so'
>>> >> for module APR:
>>> >> /usr/local/lib/perl5/site_perl/5.20.2/x86_64-linux-thread-multi/auto/APR/APR.so:
>>> >> undefined symbol: ap_strchr at
>>> >> /usr/local/lib/perl5/5.20.2/x86_64-linux-thread-multi/DynaLoader.pm line
>>> >> 193.
>>> >> # at
>>> >> /usr/local/lib/perl5/site_perl/5.20.2/x86_64-linux-thread-multi/APR/Table.pm
>>> >> line 23.
>>> >>
>>> >> The following test module loads OK, but fails if I uncomment any of the
>>> >> "use APR::*" lines:
>>> >>
>>> >> #-------------------------------------------------------------------------
>>> >>
>>> >> package mytest::mytestmodule;
>>> >>
>>> >> use 5.010001;
>>> >> use strict;
>>> >> use warnings;
>>> >> use Carp;
>>> >> $SIG{__DIE__} = \&Carp::confess;
>>> >>
>>> >> use mod_perl2;
>>> >> use Apache2::Connection();
>>> >> use Apache2::RequestRec();
>>> >> use Apache2::SubRequest();
>>> >> use Apache2::Access();
>>> >> use Apache2::RequestUtil();
>>> >> use Apache2::Response();
>>> >> use Apache2::Log();
>>> >> use Apache2::Util();
>>> >> use Apache2::Const ("-compile", qw(:common :methods :satisfy :auth
>>> >> MODE_READBYTES));
>>> >> use Apache2::URI();
>>> >> use Apache2::Filter ();
>>> >> #use APR::Const ("-compile", qw(:common SUCCESS BLOCK_READ));
>>> >> use IO::Socket qw(SOCK_STREAM);
>>> >> use Data::Dumper;
>>> >> use AnyDBM_File ();
>>> >> #use APR::Brigade ();
>>> >> #use APR::Bucket ();
>>> >> #use APR::Base64 ();
>>> >> #use APR::Table ();
>>> >> #use APR::URI ();
>>> >> use URI::Escape::XS qw/uri_escape uri_unescape/;
>>> >> #use Apache2::MPM();
>>> >>
>>> >> our $VERSION = '1.0.1';
>>> >>
>>> >> 1;
>>> >> __END__
>>> >>
>>> >> #-------------------------------------------------------------------------
>>> >>
>>> >> -------------8<---------- Start Bug Report ------------8<----------
>>> >> 1. Problem Description:
>>> >>
>>> >> [DESCRIBE THE PROBLEM HERE]
>>> >>
>>> >> 2. Used Components and their Configuration:
>>> >>
>>> >> *** mod_perl version 2.000009
>>> >>
>>> >> *** using /usr/local/src/mod_perl-2.0/lib/Apache2/BuildConfig.pm
>>> >>
>>> >> *** Makefile.PL options:
>>> >> MP_APR_CONFIG => /usr/local/httpd-2.4.12/bin/apr-1-config
>>> >> MP_APR_LIB => aprext
>>> >> MP_APXS => /usr/local/httpd-2.4.12/bin/apxs
>>> >> MP_COMPAT_1X => 1
>>> >> MP_GENERATE_XS => 1
>>> >> MP_LIBNAME => mod_perl
>>> >> MP_USE_DSO => 1
>>> >>
>>> >>
>>> >> *** /usr/local/httpd-2.4.12/bin/httpd -V
>>> >> Server version: Apache/2.4.12 (Unix)
>>> >> Server built: Feb 27 2015 20:05:23
>>> >> Server's Module Magic Number: 20120211:41
>>> >> Server loaded: APR 1.5.1, APR-UTIL 1.5.4
>>> >> Compiled using: APR 1.5.1, APR-UTIL 1.5.4
>>> >> Architecture: 64-bit
>>> >> Server MPM: worker
>>> >> threaded: yes (fixed thread count)
>>> >> forked: yes (variable process count)
>>> >> Server compiled with....
>>> >> -D APR_HAS_SENDFILE
>>> >> -D APR_HAS_MMAP
>>> >> -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled)
>>> >> -D APR_USE_SYSVSEM_SERIALIZE
>>> >> -D APR_USE_PTHREAD_SERIALIZE
>>> >> -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT
>>> >> -D APR_HAS_OTHER_CHILD
>>> >> -D AP_HAVE_RELIABLE_PIPED_LOGS
>>> >> -D DYNAMIC_MODULE_LIMIT=256
>>> >> -D HTTPD_ROOT="/usr/local/httpd-2.4.12"
>>> >> -D SUEXEC_BIN="/usr/local/httpd-2.4.12/bin/suexec"
>>> >>
>>> >>
>>> >> *** /usr/bin/ldd /usr/local/httpd-2.4.12/bin/httpd
>>> >> linux-vdso.so.1 => (0x00007fffcefff000)
>>> >> libpcre.so.0 => /lib64/libpcre.so.0 (0x000000327f400000)
>>> >> libaprutil-1.so.0 =>
>>> >> /usr/local/httpd-2.4.12/lib/libaprutil-1.so.0 (0x00007f3ba864c000)
>>> >> libexpat.so.1 => /lib64/libexpat.so.1 (0x0000003281c00000)
>>> >> libapr-1.so.0 => /usr/local/httpd-2.4.12/lib/libapr-1.so.0
>>> >> (0x00007f3ba8417000)
>>> >> librt.so.1 => /lib64/librt.so.1 (0x000000327dc00000)
>>> >> libcrypt.so.1 => /lib64/libcrypt.so.1 (0x00000036c2400000)
>>> >> libpthread.so.0 => /lib64/libpthread.so.0 (0x000000327d400000)
>>> >> libc.so.6 => /lib64/libc.so.6 (0x000000327d000000)
>>> >> /lib64/ld-linux-x86-64.so.2 (0x000000327cc00000)
>>> >> libfreebl3.so => /lib64/libfreebl3.so (0x00000036c2800000)
>>> >> libdl.so.2 => /lib64/libdl.so.2 (0x000000327d800000)
>>> >>
>>> >>
>>> >> *** (apr|apu)-config linking info
>>> >>
>>> >> -L/usr/local/httpd-2.4.12/lib -laprutil-1 -lexpat
>>> >> -L/usr/local/httpd-2.4.12/lib -lapr-1 -lrt -lcrypt -lpthread
>>> >>
>>> >>
>>> >>
>>> >> *** /usr/local/bin/perl -V
>>> >> Summary of my perl5 (revision 5 version 20 subversion 2) configuration:
>>> >>
>>> >> Platform:
>>> >> osname=linux, osvers=2.6.32-504.8.1.el6.x86_64,
>>> >> archname=x86_64-linux-thread-multi
>>> >> uname='linux xxx.xxx.xxx.xx 2.6.32-504.8.1.el6.x86_64 #1 smp fri dec
>>> >> 19 12:09:25 est 2014 x86_64 x86_64 x86_64 gnulinux '
>>> >> config_args='-Dusethreads -Dprefix=/usr/local -des -A ccflags=-fPIC'
>>> >> hint=recommended, useposix=true, d_sigaction=define
>>> >> useithreads=define, usemultiplicity=define
>>> >> use64bitint=define, use64bitall=define, uselongdouble=undef
>>> >> usemymalloc=n, bincompat5005=undef
>>> >> Compiler:
>>> >> cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fPIC -fwrapv
>>> >> -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include
>>> >> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
>>> >> optimize='-O2',
>>> >> cppflags='-D_REENTRANT -D_GNU_SOURCE -fPIC -fwrapv
>>> >> -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
>>> >> ccversion='', gccversion='4.4.7 20120313 (Red Hat 4.4.7-11)',
>>> >> gccosandvers=''
>>> >> intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
>>> >> d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
>>> >> ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
>>> >> lseeksize=8
>>> >> alignbytes=8, prototype=define
>>> >> Linker and Libraries:
>>> >> ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
>>> >> libpth=/usr/local/lib /usr/lib /lib/../lib64 /usr/lib/../lib64 /lib
>>> >> /lib64 /usr/lib64 /usr/local/lib64
>>> >> libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
>>> >> perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
>>> >> libc=libc-2.12.so, so=so, useshrplib=false, libperl=libperl.a
>>> >> gnulibc_version='2.12'
>>> >> Dynamic Linking:
>>> >> dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
>>> >> cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib
>>> >> -fstack-protector'
>>> >>
>>> >>
>>> >> Characteristics of this binary (from libperl):
>>> >> Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
>>> >> PERL_DONT_CREATE_GVSV
>>> >> PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
>>> >> PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
>>> >> PERL_NEW_COPY_ON_WRITE PERL_PRESERVE_IVUV
>>> >> USE_64_BIT_ALL USE_64_BIT_INT USE_ITHREADS
>>> >> USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE
>>> >> USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_PERLIO
>>> >> USE_PERL_ATOF USE_REENTRANT_API
>>> >> Built under linux
>>> >> Compiled at Feb 25 2015 15:58:55
>>> >> %ENV:
>>> >> PERL_LWP_USE_HTTP_10="1"
>>> >> @INC:
>>> >> /usr/local/lib/perl5/site_perl/5.20.2/x86_64-linux-thread-multi
>>> >> /usr/local/lib/perl5/site_perl/5.20.2
>>> >> /usr/local/lib/perl5/5.20.2/x86_64-linux-thread-multi
>>> >> /usr/local/lib/perl5/5.20.2
>>> >> /usr/local/lib/perl5/site_perl/5.18.2
>>> >> /usr/local/lib/perl5/site_perl/5.18.0
>>> >> /usr/local/lib/perl5/site_perl
>>> >> .
>>> >>
>>> >> *** Packages of interest status:
>>> >>
>>> >> Apache2 : -
>>> >> Apache2::Request : -
>>> >> CGI : 3.65
>>> >> ExtUtils::MakeMaker: 6.98
>>> >> LWP : 5.837
>>> >> mod_perl : -
>>> >> mod_perl2 : 2.000009
>>> >>
>>> >>
>>> >> 3. This is the core dump trace: (if you get a core dump):
>>> >>
>>> >> [CORE TRACE COMES HERE]
>>> >>
>>> >> This report was generated by bin/mp2bug on Sun Mar 1 06:21:21 2015 GMT.
>>> >>
>>> >> -------------8<---------- End Bug Report --------------8<----------
>>> >>
>>> >> # ls -al /usr/local/httpd-2.4.12/lib/
>>> >> total 4108
>>> >> drwxr-xr-x. 4 root root 4096 Feb 27 20:07 .
>>> >> drwxr-xr-x. 15 root root 4096 Feb 27 20:07 ..
>>> >> -rw-r--r--. 1 root root 9262 Feb 27 20:07 apr.exp
>>> >> drwxr-xr-x. 2 root root 4096 Feb 27 20:07 apr-util-1
>>> >> -rw-r--r--. 1 root root 5272 Feb 27 20:07 aprutil.exp
>>> >> -rw-r--r--. 1 root root 1685642 Feb 27 20:07 libapr-1.a
>>> >> -rwxr-xr-x. 1 root root 969 Feb 27 20:07 libapr-1.la
>>> >> lrwxrwxrwx. 1 root root 17 Feb 27 20:07 libapr-1.so ->
>>> >> libapr-1.so.0.5.1
>>> >> lrwxrwxrwx. 1 root root 17 Feb 27 20:07 libapr-1.so.0 ->
>>> >> libapr-1.so.0.5.1
>>> >> -rwxr-xr-x. 1 root root 858051 Feb 27 20:07 libapr-1.so.0.5.1
>>> >> -rw-r--r--. 1 root root 1022024 Feb 27 20:07 libaprutil-1.a
>>> >> -rwxr-xr-x. 1 root root 1045 Feb 27 20:07 libaprutil-1.la
>>> >> lrwxrwxrwx. 1 root root 21 Feb 27 20:07 libaprutil-1.so ->
>>> >> libaprutil-1.so.0.5.4
>>> >> lrwxrwxrwx. 1 root root 21 Feb 27 20:07 libaprutil-1.so.0 ->
>>> >> libaprutil-1.so.0.5.4
>>> >> -rwxr-xr-x. 1 root root 589222 Feb 27 20:07 libaprutil-1.so.0.5.4
>>> >> drwxr-xr-x. 2 root root 4096 Feb 27 20:07 pkgconfig
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >> Regards,
>>> >>
>>> >>
>>> >> Jie.
>>> >>
>>> >>
>>> >>
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscr...@perl.apache.org
For additional commands, e-mail: dev-h...@perl.apache.org
