Thanks for the extra information.
I think the build with --enable-maintainer-mode succeeded simply
because it doesn't include -DAP_DEBUG; the ap_strchr change was
probably not related.
It would be nice to allow building mod_perl with a httpd built with
--enable-maintainer-mode, and in the light of Joe's comment I think we
simply need to remove -DAP_DEBUG from the build flags.
So please could you try rebuilding again using a clean mod_perl source
tree (i.e. revert the ap_strchr change) but with the patch below
applied to it, and using an --enable-maintainer-mode httpd?
You may still have to fiddle with slotmem_shm_module as before (sorry,
I do not know what the problem is there) and I wouldn't expect the two
test failures to go away either, but I'm hopeful that this build might
at least work.
Index: lib/Apache2/Build.pm
===================================================================
--- lib/Apache2/Build.pm (revision 1673126)
+++ lib/Apache2/Build.pm (working copy)
@@ -616,6 +616,9 @@
my $extra_cppflags = $self->apxs_extra_cppflags;
$ccopts .= " " . $extra_cppflags;
+ # Make sure the evil AP_DEBUG is not defined when building mod_perl
+ $ccopts =~ s/ ?-DAP_DEBUG\b//;
+
$ccopts;
}
On 13 April 2015 at 03:37, Jie Gao <j....@sydney.edu.au> wrote:
> Hi Steve
>
> I took some time to look further into this problem:
>
>> [Fri Apr 10 08:04:45.465468 2015] [proxy_balancer:emerg] [pid 19852:tid
>> 140397405107968] AH01177: Failed to lookup provider 'shm' for 'slotmem': is
>> mod_slotmem_shm loaded??
>
> and I found that the apache build process does not allow
> slotmem_shm_module to be loaded by default, i.e. "LoadModule
> slotmem_shm_module modules/mod_slotmem_shm.so" was commented out in
> httpd.conf.
>
> Uncommenting that line made this problem go away.
>
> At the end of the process (with Apache built without
> "--enable-maintainer-mode", and with ap_strchr replaced with
> strchr, which you suggested (but may not be necessary here without
> "--enable-maintainer-mode", I could load my modules successfully.
>
> There were still some errors when running "make test" for mod_perl:
>
>
> ...
> t/hooks/authen_digest.t ................. 1/7 # Failed test 4 in
> t/hooks/authen_digest.t at line 36
> # Failed test 5 in t/hooks/authen_digest.t at line 38
> # Failed test 6 in t/hooks/authen_digest.t at line 42
> # Failed test 7 in t/hooks/authen_digest.t at line 46
> t/hooks/authen_digest.t ................. Failed 4/7 subtests
> ...
> t/perl/ithreads3.t ...................... 1/6 # Failed test 3 in
> t/perl/ithreads3.t at line 32
> # Failed test 4 in t/perl/ithreads3.t at line 33
> # Failed test 5 in t/perl/ithreads3.t at line 35
> t/perl/ithreads3.t ...................... Failed 3/6 subtests
>
> Here is some more info:
>
> [12:26:07]jiegao@XXXX/usr/local/src/mod_perl:975> rm t/logs/error_log
> jiegao@XXXX/usr/local/src/mod_perl:976> t/TEST -v t/hooks/authen_digest.t
> t/perl/ithreads3.t
> [warning] setting ulimit to allow core files
> ulimit -c unlimited; /usr/local/bin/perl /usr/local/src/mod_perl-2.0/t/TEST
> -v 't/hooks/authen_digest.t' 't/perl/ithreads3.t'
> /usr/local/httpd-2.4.12/bin/httpd -d /usr/local/src/mod_perl-2.0/t -f
> /usr/local/src/mod_perl-2.0/t/conf/httpd.conf -D APACHE2 -D APACHE2_4 -D
> PERL_USEITHREADS
> using Apache/2.4.12 (worker MPM)
>
> waiting 300 seconds for server to start: .[Mon Apr 13 12:28:17.293771 2015]
> [env:warn] [pid 25085:tid 140715845183232] AH01506: PassEnv variable
> LD_LIBRARY_PATH was undefined
> [Mon Apr 13 12:28:17.319527 2015] [perl:info] [pid 25085:tid 140715845183232]
> 6 Apache2:: modules loaded
> [Mon Apr 13 12:28:17.319576 2015] [perl:info] [pid 25085:tid 140715845183232]
> 0 APR:: modules loaded
> [Mon Apr 13 12:28:17.319633 2015] [perl:info] [pid 25085:tid 140715845183232]
> base server + 32 vhosts ready to run tests
> ...
> waiting 300 seconds for server to start: ok (waited 2 secs)
> server localhost:8529 started
> server localhost:8530 listening (filter_out_apache)
> server localhost:8531 listening (perlsections)
> server localhost:8532 listening (inherit)
> server localhost:8533 listening (TestModperl::perl_options2)
> server localhost:8534 listening (TestModperl::perl_options)
> server localhost:8535 listening (TestModperl::setupenv)
> server localhost:8536 listening (TestModperl::merge)
> server localhost:8537 listening (TestUser::rewrite)
> server localhost:8538 listening (TestModules::proxy)
> server localhost:8539 listening (TestVhost::config)
> server localhost:8540 listening (TestVhost::log)
> server localhost:8541 listening (TestDirective::perlcleanuphandler)
> server localhost:8542 listening (TestProtocol::eliza)
> server localhost:8543 listening (TestProtocol::echo_nonblock)
> server localhost:8544 listening (TestProtocol::echo_block)
> server localhost:8545 listening (TestProtocol::echo_timeout)
> server localhost:8546 listening (TestProtocol::echo_bbs2)
> server localhost:8547 listening (TestProtocol::pseudo_http)
> server localhost:8548 listening (TestProtocol::echo_filter)
> server localhost:8549 listening (TestProtocol::echo_bbs)
> server localhost:8550 listening (TestPreConnection::note)
> server localhost:8551 listening (TestHooks::startup)
> server localhost:8552 listening (TestHooks::hookrun)
> server localhost:8553 listening (TestHooks::trans)
> server localhost:8554 listening (TestHooks::stacked_handlers2)
> server localhost:8555 listening (TestHooks::init)
> server localhost:8556 listening (TestFilter::both_str_con_add)
> server localhost:8557 listening (TestFilter::in_bbs_inject_header)
> server localhost:8558 listening (TestFilter::in_str_msg)
> server localhost:8559 listening (TestFilter::in_bbs_msg)
> server localhost:8560 listening (TestDirective::perlrequire)
> server localhost:8561 listening (TestDirective::perlmodule)
> server localhost:8562 listening (TestPerl::ithreads)
> server localhost:8563 listening (TestPerl::ithreads3)
> server localhost:8564 listening (TestDirective::perlloadmodule3)
> server localhost:8565 listening (TestDirective::perlloadmodule5)
> server localhost:8566 listening (TestDirective::perlloadmodule4)
> server localhost:8567 listening (TestAPI::add_config)
> server localhost:8568 listening (TestDirective::perlloadmodule6)
> server localhost:8569 listening (TestHooks::push_handlers_anon)
> t/hooks/authen_digest.t ..
> 1..7
> # Running under perl version 5.020002 for linux
> # Current time local: Mon Apr 13 12:28:20 2015
> # Current time GMT: Mon Apr 13 02:28:20 2015
> # Using Test.pm version 1.26
> # Using Apache/Test.pm version 1.38
> # testing : handler returned HTTP_OK
> # expected: 200
> # received: '200'
> ok 1
> # response had no WWW-Authenticate header
> ok 2
> # testing : handler returned HTTP_UNAUTHORIZED
> # expected: 401
> # received: '401'
> ok 3
> # response had a WWW-Authenticate header
> not ok 4
> # Failed test 4 in t/hooks/authen_digest.t at line 36
> # testing : response is using Digest authentication scheme
> # expected: qr/^Digest/
> # received: undef
> not ok 5
> # Failed test 5 in t/hooks/authen_digest.t at line 38
> # testing : WWW-Authenticate header contains the proper realm
> # expected: qr/realm="Simple Digest"/
> # received: undef
> not ok 6
> # Failed test 6 in t/hooks/authen_digest.t at line 42
> # testing : WWW-Authenticate header contains a nonce
> # expected: qr/nonce="/
> # received: undef
> not ok 7
> # Failed test 7 in t/hooks/authen_digest.t at line 46
> Failed 4/7 subtests
> t/perl/ithreads3.t .......
> 1..6
> # Running under perl version 5.020002 for linux
> # Current time local: Mon Apr 13 12:28:21 2015
> # Current time GMT: Mon Apr 13 02:28:21 2015
> # Using Test.pm version 1.26
> # Using Apache/Test.pm version 1.38
> # connecting to http://localhost:8563/
> # testing : perl-script 1
> # expected: 2
> # received: '2'
> ok 1
> # testing : modperl 1
> # expected: 2
> # received: '2'
> ok 2
> # testing : perl-script 2
> # expected: 5
> # received: '2'
> not ok 3
> # Failed test 3 in t/perl/ithreads3.t at line 32
> # testing : modperl 2
> # expected: 5
> # received: '3'
> not ok 4
> # Failed test 4 in t/perl/ithreads3.t at line 33
> # testing : perl-script 3
> # expected: 3
> # received: '2'
> not ok 5
> # Failed test 5 in t/perl/ithreads3.t at line 35
> # testing : modperl 3
> # expected: 3
> # received: '3'
> ok 6
> Failed 3/6 subtests
>
> Test Summary Report
> -------------------
> t/hooks/authen_digest.t (Wstat: 0 Tests: 7 Failed: 4)
> Failed tests: 4-7
> t/perl/ithreads3.t (Wstat: 0 Tests: 6 Failed: 3)
> Failed tests: 3-5
> Files=2, Tests=13, 2 wallclock secs ( 0.05 usr 0.02 sys + 0.99 cusr 0.31
> csys = 1.37 CPU)
> Result: FAIL
> Failed 2/2 test programs. 7/13 subtests failed.
> [warning] server localhost:8529 shutdown
> [warning] port 8529 still in use...
> ...done
> [ error] error running tests (please examine t/logs/error_log)
>
> # cat less t/logs/error_log
> ********************************************************************************
> *** This is a test for Apache2::ServerUtil::server_shutdown_cleanup_register
> ***
> *** Following a line consisting only of * characters there should be a line
> ***
> *** containing
> ***
> *** "cleanup died: testing server_shutdown_cleanup_register".
> ***
> *** The next line should then read
> ***
> *** "done with server_shutdown_cleanup_register"
> ***
> ********************************************************************************
> Apache2::ServerUtil: cleanup died: testing server_shutdown_cleanup_register
> *** done with server_shutdown_cleanup_register
> ***
> ********************************************************************************
> END in modperl_extra.pl, pid=25085
> END in modperl_extra.pl, pid=25085
> [Mon Apr 13 12:28:20.045292 2015] [slotmem_shm:debug] [pid 25089:tid
> 140715845183232] mod_slotmem_shm.c(466): AH02301: attach looking for
> /usr/local/src/mod_perl-2.0/t/logs/slotmem-shm-mod_heartmonitor.shm
> [Mon Apr 13 12:28:20.045348 2015] [lbmethod_heartbeat:notice] [pid 25089:tid
> 140715845183232] AH02282: No slotmem from mod_heartmonitor
> [Mon Apr 13 12:28:20.176754 2015] [mpm_worker:notice] [pid 25089:tid
> 140715845183232] AH00292: Apache/2.4.12 (Unix) world domination series/2.0
> mod_perl/2.0.9dev Perl/v5.20.2 configured -- resuming normal operations
> [Mon Apr 13 12:28:20.176805 2015] [mpm_worker:info] [pid 25089:tid
> 140715845183232] AH00293: Server built: Apr 13 2015 07:07:03
> [Mon Apr 13 12:28:20.176846 2015] [core:notice] [pid 25089:tid
> 140715845183232] AH00094: Command line: '/usr/local/httpd-2.4.12/bin/httpd -d
> /usr/local/src/mod_perl-2.0/t -f
> /usr/local/src/mod_perl-2.0/t/conf/httpd.conf -D APACHE2 -D APACHE2_4 -D
> PERL_USEITHREADS'
> [Mon Apr 13 12:28:20.179522 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179579 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179584 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179588 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179591 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179595 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179598 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179602 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179605 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179608 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179612 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179627 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179631 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179635 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179638 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179641 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179645 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179648 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179652 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179655 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179658 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179662 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179665 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179668 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179672 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179675 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179679 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179682 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179685 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179689 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179692 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179700 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179704 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179707 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179711 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179714 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179718 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179721 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179725 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179744 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179749 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179752 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179755 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179759 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179762 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179765 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179769 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179772 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179776 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179779 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179782 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179789 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179792 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179796 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179799 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179802 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179806 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179809 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179813 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179816 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179820 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179823 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179851 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179855 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179858 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179862 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179873 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179883 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179887 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179890 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179894 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179903 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179907 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179910 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179914 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179917 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.179921 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1772): AH00924: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ shared already
> initialized
> [Mon Apr 13 12:28:20.179924 2015] [proxy:debug] [pid 25093:tid
> 140715845183232] proxy_util.c(1814): AH00926: worker
> http://localhost:8529/TestFilter__both_str_req_proxy_content/ local already
> initialized
> [Mon Apr 13 12:28:20.667343 2015] [authz_core:debug] [pid 25093:tid
> 140715476645632] mod_authz_core.c(835): [client 127.0.0.1:45582] AH01628:
> authorization result: granted (no directives)
> [Mon Apr 13 12:28:21.300977 2015] [authz_core:debug] [pid 25093:tid
> 140715554629376] mod_authz_core.c(809): [client 127.0.0.1:45583] AH01626:
> authorization result of Require valid-user : denied (no authenticated user
> yet)
> [Mon Apr 13 12:28:21.301025 2015] [authz_core:debug] [pid 25093:tid
> 140715554629376] mod_authz_core.c(809): [client 127.0.0.1:45583] AH01626:
> authorization result of <RequireAny>: denied (no authenticated user yet)
> [Mon Apr 13 12:28:21.303225 2015] [authz_core:debug] [pid 25093:tid
> 140715554629376] mod_authz_core.c(809): [client 127.0.0.1:45583] AH01626:
> authorization result of Require valid-user : granted
> [Mon Apr 13 12:28:21.303252 2015] [authz_core:debug] [pid 25093:tid
> 140715554629376] mod_authz_core.c(809): [client 127.0.0.1:45583] AH01626:
> authorization result of <RequireAny>: granted
> [Mon Apr 13 12:28:21.314069 2015] [authz_core:debug] [pid 25093:tid
> 140715476645632] mod_authz_core.c(809): [client 127.0.0.1:45584] AH01626:
> authorization result of Require valid-user : denied (no authenticated user
> yet)
> [Mon Apr 13 12:28:21.314101 2015] [authz_core:debug] [pid 25093:tid
> 140715476645632] mod_authz_core.c(809): [client 127.0.0.1:45584] AH01626:
> authorization result of <RequireAny>: denied (no authenticated user yet)
> [Mon Apr 13 12:28:21.992567 2015] [authz_core:debug] [pid 25093:tid
> 140715554629376] mod_authz_core.c(835): [client 127.0.0.1:47865] AH01628:
> authorization result: granted (no directives)
> [Mon Apr 13 12:28:21.997691 2015] [authz_core:debug] [pid 25093:tid
> 140715476645632] mod_authz_core.c(835): [client 127.0.0.1:47866] AH01628:
> authorization result: granted (no directives)
> [Mon Apr 13 12:28:22.012035 2015] [authz_core:debug] [pid 25093:tid
> 140715554629376] mod_authz_core.c(835): [client 127.0.0.1:47867] AH01628:
> authorization result: granted (no directives)
> [Mon Apr 13 12:28:22.012215 2015] [authz_core:debug] [pid 25093:tid
> 140715554629376] mod_authz_core.c(835): [client 127.0.0.1:47867] AH01628:
> authorization result: granted (no directives)
> [Mon Apr 13 12:28:22.015558 2015] [authz_core:debug] [pid 25093:tid
> 140715476645632] mod_authz_core.c(835): [client 127.0.0.1:47868] AH01628:
> authorization result: granted (no directives)
> [Mon Apr 13 12:28:22.019047 2015] [authz_core:debug] [pid 25093:tid
> 140715554629376] mod_authz_core.c(835): [client 127.0.0.1:47869] AH01628:
> authorization result: granted (no directives)
> [Mon Apr 13 12:28:22.021466 2015] [authz_core:debug] [pid 25093:tid
> 140715476645632] mod_authz_core.c(835): [client 127.0.0.1:47870] AH01628:
> authorization result: granted (no directives)
> [Mon Apr 13 12:28:22.021608 2015] [authz_core:debug] [pid 25093:tid
> 140715476645632] mod_authz_core.c(835): [client 127.0.0.1:47870] AH01628:
> authorization result: granted (no directives)
> [Mon Apr 13 12:28:22.024982 2015] [authz_core:debug] [pid 25093:tid
> 140715554629376] mod_authz_core.c(835): [client 127.0.0.1:47871] AH01628:
> authorization result: granted (no directives)
> [Mon Apr 13 12:28:22.028020 2015] [authz_core:debug] [pid 25093:tid
> 140715476645632] mod_authz_core.c(835): [client 127.0.0.1:47872] AH01628:
> authorization result: granted (no directives)
> [Mon Apr 13 12:28:22.030287 2015] [authz_core:debug] [pid 25093:tid
> 140715554629376] mod_authz_core.c(835): [client 127.0.0.1:47873] AH01628:
> authorization result: granted (no directives)
> [Mon Apr 13 12:28:22.030435 2015] [authz_core:debug] [pid 25093:tid
> 140715554629376] mod_authz_core.c(835): [client 127.0.0.1:47873] AH01628:
> authorization result: granted (no directives)
> [Mon Apr 13 12:28:22.246706 2015] [perl:info] [pid 25093:tid 140715845183232]
> Child process pid=25093 is exiting
> [Mon Apr 13 12:28:22.246890 2015] [perl:info] [pid 25093:tid 140715845183232]
> Child process pid=25093 is exiting - server push
> END in modperl_extra.pl, pid=25093
> END in modperl_extra.pl, pid=25093
> [Mon Apr 13 12:28:23.591699 2015] [core:info] [pid 25089:tid 140715845183232]
> AH00096: removed PID file /usr/local/src/mod_perl-2.0/t/logs/httpd.pid
> (pid=25089)
> [Mon Apr 13 12:28:23.591818 2015] [mpm_worker:notice] [pid 25089:tid
> 140715845183232] AH00295: caught SIGTERM, shutting down
> ********************************************************************************
> *** This is a test for Apache2::ServerUtil::server_shutdown_cleanup_register
> ***
> *** Following a line consisting only of * characters there should be a line
> ***
> *** containing
> ***
> *** "cleanup died: testing server_shutdown_cleanup_register".
> ***
> *** The next line should then read
> ***
> *** "done with server_shutdown_cleanup_register"
> ***
> ********************************************************************************
> Apache2::ServerUtil: cleanup died: testing server_shutdown_cleanup_register
> *** done with server_shutdown_cleanup_register
> ***
> ********************************************************************************
> END in modperl_extra.pl, pid=25089
> END in modperl_extra.pl, pid=25089
>
> BTW, you can install VirtualBox on your Windows machine and have a linux
> virtual server for testing.
>
>
>
> Regards,
>
>
> Jie
>
> * Jie Gao <j....@sydney.edu.au> wrote:
>
>> Date: Fri, 10 Apr 2015 12:02:05 +1000
>> From: Jie Gao <j....@sydney.edu.au>
>> To: Steve Hay <steve.m....@googlemail.com>
>> CC: "modp...@perl.apache.org" <modp...@perl.apache.org>, mod_perl Dev
>> <dev@perl.apache.org>
>> Subject: Re: Trunk: APR.so won't load
>> User-Agent: Mutt/1.5.21 (2010-09-15)
>>
>> Hi Steve
>>
>> I modified xs/Apache2/Module/Apache2__Module.h and replaced ap_strchr with
>> strchr before recompiling. I still got the same error message after that.
>>
>> I re-compiled apache without enabling the maintainer mode:
>>
>> ---
>> CC="gcc"; export CC
>> CFLAGS="-Wall -O3"; export CFLAGS
>> "./configure" \
>> "--prefix=/usr/local/httpd-2.4.12" \
>> "--with-included-apr" \
>> "--with-mpm=worker" \
>> "--enable-auth-digest" \
>> "--enable-dav" \
>> "--enable-expires" \
>> "--enable-headers" \
>> "--enable-proxy-html" \
>> "--enable-xml2enc" \
>> "--enable-info" \
>> "--enable-mime-magic" \
>> "--enable-nonportable-atomics" \
>> "--enable-proxy" \
>> "--enable-proxy-balancer" \
>> "--enable-proxy-http" \
>> "--enable-rewrite" \
>> "--enable-so" \
>> "--enable-ssl" \
>> "--enable-unique-id" \
>> "--enable-vhost-alias" \
>> "--enable-modules=most" \
>> "--enable-mods-shared=most" \
>> "--enable-lbmethod-byrequests" \
>> "--enable-lbmethod-bytraffic" \
>> "--enable-lbmethod-bybusyness" \
>> "--enable-lbmethod-heartbeat" \
>> "--enable-heartmonitor" \
>> "--enable-watchdog" \
>> "--enable-ratelimit" \
>> "--enable-ext-filter" \
>> "--enable-request" \
>> "CC=gcc" \
>> "CFLAGS=-Wall -O3" \
>> "$@"
>> ---
>>
>> and got mod_perl source code from Trunk again. mod_perl then fails "make
>> test" early on:
>>
>> ---
>> [warning] setting ulimit to allow core files
>> ulimit -c unlimited; /usr/local/bin/perl
>> /usr/local/src/mod_perl-2.0_20150310_0709/t/TEST -clean
>> APACHE_TEST_APXS= APACHE_TEST_PORT= APACHE_TEST_HTTPD= APACHE_TEST_GROUP=
>> APACHE_TEST_USER= \
>> /usr/local/bin/perl -Iblib/arch -Iblib/lib \
>> t/TEST -bugreport -verbose=0
>> [warning] setting ulimit to allow core files
>> ulimit -c unlimited; /usr/local/bin/perl
>> /usr/local/src/mod_perl-2.0_20150310_0709/t/TEST -bugreport -verbose=0
>> /usr/local/httpd-2.4.12/bin/httpd -d
>> /usr/local/src/mod_perl-2.0_20150310_0709/t -f
>> /usr/local/src/mod_perl-2.0_20150310_0709/t/conf/httpd.conf -D APACHE2 -D
>> PERL_USEITHREADS
>> using Apache/2.4.12 (worker MPM)
>>
>> waiting 300 seconds for server to start: .[Fri Apr 10 08:04:42.875770 2015]
>> [env:warn] [pid 19848:tid 140397405107968] AH01506: PassEnv variable
>> LD_LIBRARY_PATH was undefined
>> [Fri Apr 10 08:04:42.900978 2015] [perl:info] [pid 19848:tid
>> 140397405107968] 6 Apache2:: modules loaded
>> [Fri Apr 10 08:04:42.901033 2015] [perl:info] [pid 19848:tid
>> 140397405107968] 0 APR:: modules loaded
>> [Fri Apr 10 08:04:42.901092 2015] [perl:info] [pid 19848:tid
>> 140397405107968] base server + 32 vhosts ready to run tests
>> .............................................................................................................................................................................................................................................................................................................
>> waiting 300 seconds for server to start: not ok
>> [ error] giving up after 301 secs. If you think that your system
>> is slow or overloaded try again with a longer timeout value.
>> by setting the environment variable APACHE_TEST_STARTUP_TIMEOUT
>> to a high value (e.g. 600) and repeat the last command.
>>
>> [ error] server failed to start! (please examine t/logs/error_log)
>> +--------------------------------------------------------+
>> | Please file a bug report: http://perl.apache.org/bugs/ |
>> +--------------------------------------------------------+
>> make: *** [run_tests] Error 1
>> [08:09:44]jiegao@XXXX/usr/local/src/mod_perl-2.0_20150310_0709:822> ls -l
>> t/logs/error_log
>> -rw-r--r--. 1 jiegao jiegao 1243 Apr 10 08:04 t/logs/error_log
>> [08:10:01]jiegao@XXXX/usr/local/src/mod_perl-2.0_20150310_0709:823> cat !$
>> jiegao@XXXX/usr/local/src/mod_perl-2.0_20150310_0709:823> cat
>> t/logs/error_log
>> ********************************************************************************
>> *** This is a test for Apache2::ServerUtil::server_shutdown_cleanup_register
>> ***
>> *** Following a line consisting only of * characters there should be a line
>> ***
>> *** containing
>> ***
>> *** "cleanup died: testing server_shutdown_cleanup_register".
>> ***
>> *** The next line should then read
>> ***
>> *** "done with server_shutdown_cleanup_register"
>> ***
>> ********************************************************************************
>> Apache2::ServerUtil: cleanup died: testing server_shutdown_cleanup_register
>> *** done with server_shutdown_cleanup_register
>> ***
>> ********************************************************************************
>> END in modperl_extra.pl, pid=19848
>> END in modperl_extra.pl, pid=19848
>> [Fri Apr 10 08:04:45.465468 2015] [proxy_balancer:emerg] [pid 19852:tid
>> 140397405107968] AH01177: Failed to lookup provider 'shm' for 'slotmem': is
>> mod_slotmem_shm loaded??
>> [Fri Apr 10 08:04:45.465496 2015] [:emerg] [pid 19852:tid 140397405107968]
>> AH00020: Configuration Failed, exiting
>> ---
>>
>> Adding "--enable-maintainer-mode" and re-compliling apache, I could get
>> "make test" going as before.
>>
>>
>>
>>
>> Regards,
>>
>> Jie
>>
>> * Steve Hay <steve.m....@googlemail.com> wrote:
>>
>> > Date: Thu, 9 Apr 2015 18:27:51 +0100
>> > From: Steve Hay <steve.m....@googlemail.com>
>> > To: Jie Gao <j....@sydney.edu.au>
>> > CC: "modp...@perl.apache.org" <modp...@perl.apache.org>, mod_perl Dev
>> > <dev@perl.apache.org>
>> > Subject: Re: Trunk: APR.so won't load
>> >
>> > Actually, I don't think there is anything stopping -DAP_DEBUG from
>> > coming through from the httpd config. The change that was made
>> > (r357052) just stopped mod_perl from adding that itself when
>> > MP_MAINTAINER is specified.
>> >
>> > But maybe we do need to filter out -DAP_DEBUG?
>> > Or else stop using ap_strchr() and just use strchr() directly?
>> >
>> > Could you try the latter, since it seems like an easy fix? -- Change
>> > the one instance of ap_strchr() in xs/Apache2/Module/Apache2__Module.h
>> > to be strchr() instead and then rebuild. Does that make the problem go
>> > away?
>> >
>> >
>> > On 9 April 2015 at 18:16, Steve Hay <steve.m....@googlemail.com> wrote:
>> > > Can you see where the -DAP_DEBUG comes from, e.g. by grepping
>> > > /usr/local/httpd-2.4.12/bin/ap* for AP_DEBUG?
>> > >
>> > > I think that symbol is not supposed to find its way into the mod_perl
>> > > build options, but it's obviously getting picked up somewhere and
>> > > slipping through...
>> > >
>> > >
>> > > On 9 April 2015 at 15:05, Jie Gao <j....@sydney.edu.au> wrote:
>> > >> Hi Steve
>> > >>
>> > >> httpd is configured with "--enable-maintainer-mode".
>> > >>
>> > >> For mod_perl:
>> > >>
>> > >> /usr/local/bin/perl Makefile.PL
>> > >> MP_APXS=/usr/local/httpd-2.4.12/bin/apxs
>> > >> MP_APR_CONFIG=/usr/local/httpd-2.4.12/bin/apr-1-config
>> > >>
>> > >> and I found the following line in the resultant Makefile:
>> > >>
>> > >> CCFLAGS = -D_REENTRANT -D_GNU_SOURCE -fPIC -fwrapv
>> > >> -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include
>> > >> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DMOD_PERL -DMP_COMPAT_1X
>> > >> -DLINUX -D_REENTRANT -D_GNU_SOURCE -DAP_DEBUG
>> > >>
>> > >>
>> > >>
>> > >> Regards,
>> > >>
>> > >> Jie
>> > >>
>> > >> * Steve Hay <steve.m....@googlemail.com> wrote:
>> > >>
>> > >>> Date: Thu, 9 Apr 2015 14:29:44 +0100
>> > >>> From: Steve Hay <steve.m....@googlemail.com>
>> > >>> To: Jie Gao <j....@sydney.edu.au>
>> > >>> CC: "modp...@perl.apache.org" <modp...@perl.apache.org>, mod_perl Dev
>> > >>> <dev@perl.apache.org>
>> > >>> Subject: Re: Trunk: APR.so won't load
>> > >>>
>> > >>> Sorry for the slow reply.
>> > >>>
>> > >>> I cannot reproduce the problem here on Windows. Your example module
>> > >>> loads up fine with all the "use APR" lines uncommented.
>> > >>>
>> > >>> The build system (and the means by which APR::* should be loadable
>> > >>> without mod_perl.so being loaded) is different on Windows, but I did
>> > >>> notice this:
>> > >>>
>> > >>> ap_strchr seems to only be used in xs\Apache2\Module\Apache2__Module.h
>> > >>> but when I run Module.c through the preprocessor I find that ap_strchr
>> > >>> gets changed to strchr, and the latter is simply imported from the C
>> > >>> run-time library.
>> > >>>
>> > >>> I guess that's down to this code in httpd.h:
>> > >>>
>> > >>> #ifdef AP_DEBUG
>> > >>>
>> > >>> #undef strchr
>> > >>> # define strchr(s, c) ap_strchr(s,c)
>> > >>> #undef strrchr
>> > >>> # define strrchr(s, c) ap_strrchr(s,c)
>> > >>> #undef strstr
>> > >>> # define strstr(s, c) ap_strstr(s,c)
>> > >>>
>> > >>> #else
>> > >>>
>> > >>> /** use this instead of strchr */
>> > >>> # define ap_strchr(s, c) strchr(s, c)
>> > >>> /** use this instead of strchr */
>> > >>> # define ap_strchr_c(s, c) strchr(s, c)
>> > >>> /** use this instead of strrchr */
>> > >>> # define ap_strrchr(s, c) strrchr(s, c)
>> > >>> /** use this instead of strrchr */
>> > >>> # define ap_strrchr_c(s, c) strrchr(s, c)
>> > >>> /** use this instead of strrstr*/
>> > >>> # define ap_strstr(s, c) strstr(s, c)
>> > >>> /** use this instead of strrstr*/
>> > >>> # define ap_strstr_c(s, c) strstr(s, c)
>> > >>>
>> > >>> #endif
>> > >>>
>> > >>> so presumably I do not have AP_DEBUG defined for my build (even though
>> > >>> it was a debug build).
>> > >>>
>> > >>> It looks like AP_DEBUG should not be defined, even in maintainer mode,
>> > >>> according to an old Changes entry:
>> > >>>
>> > >>> remove -DAP_HAVE_DESIGNATED_INITIALIZER and -DAP_DEBUG from
>> > >>> MP_MAINTAINER mode to avoid collisions [Joe Orton]
>> > >>>
>> > >>> but do you somehow have AP_DEBUG defined somewhere, which causes the
>> > >>> replacement of ap_strchr with strchr to not happen for you?
>> > >>>
>> > >>>
>> > >>> On 27 March 2015 at 09:14, Jie Gao <j....@sydney.edu.au> wrote:
>> > >>> > Hi All
>> > >>> >
>> > >>> > I had some more time looking into this, and here's some info I can
>> > >>> > provide.
>> > >>> >
>> > >>> > --------------------------------------------------------------------------
>> > >>> >
>> > >>> > # readelf -a
>> > >>> > /usr/local/lib/perl5/site_perl/5.20.2/x86_64-linux-thread-multi/auto/APR/APR.so
>> > >>> > ELF Header:
>> > >>> > Magic: 7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00
>> > >>> > Class: ELF64
>> > >>> > Data: 2's complement, little endian
>> > >>> > Version: 1 (current)
>> > >>> > OS/ABI: UNIX - System V
>> > >>> > ABI Version: 0
>> > >>> > Type: DYN (Shared object file)
>> > >>> > Machine: Advanced Micro Devices X86-64
>> > >>> > Version: 0x1
>> > >>> > Entry point address: 0x1cb0
>> > >>> > Start of program headers: 64 (bytes into file)
>> > >>> > Start of section headers: 15480 (bytes into file)
>> > >>> > Flags: 0x0
>> > >>> > Size of this header: 64 (bytes)
>> > >>> > Size of program headers: 56 (bytes)
>> > >>> > Number of program headers: 6
>> > >>> > Size of section headers: 64 (bytes)
>> > >>> > Number of section headers: 29
>> > >>> > Section header string table index: 26
>> > >>> >
>> > >>> > Section Headers:
>> > >>> > [Nr] Name Type Address Offset
>> > >>> > Size EntSize Flags Link Info Align
>> > >>> > [ 0] NULL 0000000000000000 00000000
>> > >>> > 0000000000000000 0000000000000000 0 0 0
>> > >>> >
>> > >>> > [ Lines removed for clarity ]
>> > >>> >
>> > >>> > Dynamic section at offset 0x36f8 contains 27 entries:
>> > >>> > Tag Type Name/Value
>> > >>> > 0x0000000000000001 (NEEDED) Shared library:
>> > >>> > [libaprutil-1.so.0]
>> > >>> > 0x0000000000000001 (NEEDED) Shared library:
>> > >>> > [libexpat.so.1]
>> > >>> > 0x0000000000000001 (NEEDED) Shared library:
>> > >>> > [libapr-1.so.0]
>> > >>> > 0x0000000000000001 (NEEDED) Shared library: [librt.so.1]
>> > >>> > 0x0000000000000001 (NEEDED) Shared library:
>> > >>> > [libcrypt.so.1]
>> > >>> > 0x0000000000000001 (NEEDED) Shared library:
>> > >>> > [libpthread.so.0]
>> > >>> > 0x0000000000000001 (NEEDED) Shared library: [libc.so.6]
>> > >>> > 0x000000000000000f (RPATH) Library rpath:
>> > >>> > [/usr/local/httpd-2.4.12/lib:/lib/../lib64]
>> > >>> >
>> > >>> > [ Lines removed for clarity ]
>> > >>> >
>> > >>> > Relocation section '.rela.plt' at offset 0x1300 contains 61 entries:
>> > >>> > Offset Info Type Sym. Value Sym.
>> > >>> > Name + Addend
>> > >>> > 000000203930 000200000007 R_X86_64_JUMP_SLO 0000000000000000
>> > >>> > Perl_mg_get + 0
>> > >>> > 000000203938 000300000007 R_X86_64_JUMP_SLO 0000000000000000
>> > >>> > Perl_sv_setiv + 0
>> > >>> > 000000203940 000400000007 R_X86_64_JUMP_SLO 0000000000000000
>> > >>> > Perl_sv_bless + 0
>> > >>> > 000000203948 000500000007 R_X86_64_JUMP_SLO 0000000000000000
>> > >>> > apr_strerror + 0
>> > >>> > 000000203950 000600000007 R_X86_64_JUMP_SLO 0000000000000000
>> > >>> > Perl_require_pv + 0
>> > >>> > 000000203958 000700000007 R_X86_64_JUMP_SLO 0000000000000000
>> > >>> > Perl_warn + 0
>> > >>> > 000000203960 000800000007 R_X86_64_JUMP_SLO 0000000000000000
>> > >>> > PerlIO_printf + 0
>> > >>> > 000000203968 000900000007 R_X86_64_JUMP_SLO 0000000000000000
>> > >>> > ap_strchr + 0
>> > >>> >
>> > >>> > [ Lines removed for clarity ]
>> > >>> >
>> > >>> > Symbol table '.dynsym' contains 86 entries:
>> > >>> > Num: Value Size Type Bind Vis Ndx Name
>> > >>> > 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
>> > >>> > 1: 00000000000018b8 0 SECTION LOCAL DEFAULT 9
>> > >>> > 2: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND
>> > >>> > Perl_mg_get
>> > >>> > 3: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND
>> > >>> > Perl_sv_setiv
>> > >>> > 4: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND
>> > >>> > Perl_sv_bless
>> > >>> > 5: 0000000000000000 0 FUNC GLOBAL DEFAULT UND
>> > >>> > apr_strerror
>> > >>> > 6: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND
>> > >>> > Perl_require_pv
>> > >>> > 7: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND Perl_warn
>> > >>> > 8: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND
>> > >>> > PerlIO_printf
>> > >>> > 9: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND ap_strchr
>> > >>> >
>> > >>> >
>> > >>> > [ Lines removed for clarity ]
>> > >>> >
>> > >>> > Symbol table '.symtab' contains 143 entries:
>> > >>> > Num: Value Size Type Bind Vis Ndx Name
>> > >>> > 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
>> > >>> > 1: 0000000000000190 0 SECTION LOCAL DEFAULT 1
>> > >>> >
>> > >>> > [ Lines removed for clarity ]
>> > >>> >
>> > >>> > 69: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND ap_strchr
>> > >>> >
>> > >>> >
>> > >>> > [ Lines removed for clarity ]
>> > >>> >
>> > >>> > --------------------------------------------------------------------------
>> > >>> >
>> > >>> > It seems that ap_strchr is not defined anywhere outside httpd, and
>> > >>> > not in
>> > >>> > any of the shared libs. This seems to create the problem when
>> > >>> > building
>> > >>> > a module with mod_perl or outside the mod_perl source.
>> > >>> >
>> > >>> > I find a somewhat related change by Stas in the past in the Changes
>> > >>> > file:
>> > >>> >
>> > >>> > bug reports generating code: [Stas]
>> > >>> > - add (apr|apu)-config linking info
>> > >>> > - show the full path to the config file used to get the data for the
>> > >>> > report
>> > >>> >
>> > >>> > The APR and APR::* family of modules can now be used without having
>> > >>> > to load mod_perl.so. On *nix, this is done by compiling the needed
>> > >>> > functions from the appropriate sources used to build mod_perl.so
>> > >>> > into APR.so, and then arranging for APR::* to 'use APR ()'. On Win32,
>> > >>> > a static library of needed functions is built, and APR/APR::*
>> > >>> > then link into this library [Stas, Joe Schaefer, Randy Kobes]
>> > >>> >
>> > >>> >
>> > >>> > I hope this helps resolve this issue in any way.
>> > >>> >
>> > >>> >
>> > >>> >
>> > >>> >
>> > >>> >
>> > >>> > Regards,
>> > >>> >
>> > >>> > Jie
>> > >>> >
>> > >>> > * Jie Gao <j....@sydney.edu.au> wrote:
>> > >>> >
>> > >>> >> Date: Sun, 1 Mar 2015 17:30:45 +1100
>> > >>> >> From: Jie Gao <j....@sydney.edu.au>
>> > >>> >> To: "modp...@perl.apache.org" <modp...@perl.apache.org>, mod_perl
>> > >>> >> Dev
>> > >>> >> <dev@perl.apache.org>
>> > >>> >> Subject: Trunk: APR.so won't load
>> > >>> >> User-Agent: Mutt/1.5.21 (2010-09-15)
>> > >>> >>
>> > >>> >> I have got the source code from the trunk, "make test" mostly
>> > >>> >> passed except for
>> > >>> >> a threading issue, but I installed it anyway.
>> > >>> >>
>> > >>> >> Tried to load a test module, but it fails with the following error:
>> > >>> >>
>> > >>> >> # Error: Can't load
>> > >>> >> '/usr/local/lib/perl5/site_perl/5.20.2/x86_64-linux-thread-multi/auto/APR/APR.so'
>> > >>> >> for module APR:
>> > >>> >> /usr/local/lib/perl5/site_perl/5.20.2/x86_64-linux-thread-multi/auto/APR/APR.so:
>> > >>> >> undefined symbol: ap_strchr at
>> > >>> >> /usr/local/lib/perl5/5.20.2/x86_64-linux-thread-multi/DynaLoader.pm
>> > >>> >> line 193.
>> > >>> >> # at
>> > >>> >> /usr/local/lib/perl5/site_perl/5.20.2/x86_64-linux-thread-multi/APR/Table.pm
>> > >>> >> line 23.
>> > >>> >>
>> > >>> >> The following test module loads OK, but fails if I uncomment any of
>> > >>> >> the "use APR::*" lines:
>> > >>> >>
>> > >>> >> #-------------------------------------------------------------------------
>> > >>> >>
>> > >>> >> package mytest::mytestmodule;
>> > >>> >>
>> > >>> >> use 5.010001;
>> > >>> >> use strict;
>> > >>> >> use warnings;
>> > >>> >> use Carp;
>> > >>> >> $SIG{__DIE__} = \&Carp::confess;
>> > >>> >>
>> > >>> >> use mod_perl2;
>> > >>> >> use Apache2::Connection();
>> > >>> >> use Apache2::RequestRec();
>> > >>> >> use Apache2::SubRequest();
>> > >>> >> use Apache2::Access();
>> > >>> >> use Apache2::RequestUtil();
>> > >>> >> use Apache2::Response();
>> > >>> >> use Apache2::Log();
>> > >>> >> use Apache2::Util();
>> > >>> >> use Apache2::Const ("-compile", qw(:common :methods :satisfy :auth
>> > >>> >> MODE_READBYTES));
>> > >>> >> use Apache2::URI();
>> > >>> >> use Apache2::Filter ();
>> > >>> >> #use APR::Const ("-compile", qw(:common SUCCESS BLOCK_READ));
>> > >>> >> use IO::Socket qw(SOCK_STREAM);
>> > >>> >> use Data::Dumper;
>> > >>> >> use AnyDBM_File ();
>> > >>> >> #use APR::Brigade ();
>> > >>> >> #use APR::Bucket ();
>> > >>> >> #use APR::Base64 ();
>> > >>> >> #use APR::Table ();
>> > >>> >> #use APR::URI ();
>> > >>> >> use URI::Escape::XS qw/uri_escape uri_unescape/;
>> > >>> >> #use Apache2::MPM();
>> > >>> >>
>> > >>> >> our $VERSION = '1.0.1';
>> > >>> >>
>> > >>> >> 1;
>> > >>> >> __END__
>> > >>> >>
>> > >>> >> #-------------------------------------------------------------------------
>> > >>> >>
>> > >>> >> -------------8<---------- Start Bug Report ------------8<----------
>> > >>> >> 1. Problem Description:
>> > >>> >>
>> > >>> >> [DESCRIBE THE PROBLEM HERE]
>> > >>> >>
>> > >>> >> 2. Used Components and their Configuration:
>> > >>> >>
>> > >>> >> *** mod_perl version 2.000009
>> > >>> >>
>> > >>> >> *** using /usr/local/src/mod_perl-2.0/lib/Apache2/BuildConfig.pm
>> > >>> >>
>> > >>> >> *** Makefile.PL options:
>> > >>> >> MP_APR_CONFIG => /usr/local/httpd-2.4.12/bin/apr-1-config
>> > >>> >> MP_APR_LIB => aprext
>> > >>> >> MP_APXS => /usr/local/httpd-2.4.12/bin/apxs
>> > >>> >> MP_COMPAT_1X => 1
>> > >>> >> MP_GENERATE_XS => 1
>> > >>> >> MP_LIBNAME => mod_perl
>> > >>> >> MP_USE_DSO => 1
>> > >>> >>
>> > >>> >>
>> > >>> >> *** /usr/local/httpd-2.4.12/bin/httpd -V
>> > >>> >> Server version: Apache/2.4.12 (Unix)
>> > >>> >> Server built: Feb 27 2015 20:05:23
>> > >>> >> Server's Module Magic Number: 20120211:41
>> > >>> >> Server loaded: APR 1.5.1, APR-UTIL 1.5.4
>> > >>> >> Compiled using: APR 1.5.1, APR-UTIL 1.5.4
>> > >>> >> Architecture: 64-bit
>> > >>> >> Server MPM: worker
>> > >>> >> threaded: yes (fixed thread count)
>> > >>> >> forked: yes (variable process count)
>> > >>> >> Server compiled with....
>> > >>> >> -D APR_HAS_SENDFILE
>> > >>> >> -D APR_HAS_MMAP
>> > >>> >> -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled)
>> > >>> >> -D APR_USE_SYSVSEM_SERIALIZE
>> > >>> >> -D APR_USE_PTHREAD_SERIALIZE
>> > >>> >> -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT
>> > >>> >> -D APR_HAS_OTHER_CHILD
>> > >>> >> -D AP_HAVE_RELIABLE_PIPED_LOGS
>> > >>> >> -D DYNAMIC_MODULE_LIMIT=256
>> > >>> >> -D HTTPD_ROOT="/usr/local/httpd-2.4.12"
>> > >>> >> -D SUEXEC_BIN="/usr/local/httpd-2.4.12/bin/suexec"
>> > >>> >>
>> > >>> >>
>> > >>> >> *** /usr/bin/ldd /usr/local/httpd-2.4.12/bin/httpd
>> > >>> >> linux-vdso.so.1 => (0x00007fffcefff000)
>> > >>> >> libpcre.so.0 => /lib64/libpcre.so.0 (0x000000327f400000)
>> > >>> >> libaprutil-1.so.0 =>
>> > >>> >> /usr/local/httpd-2.4.12/lib/libaprutil-1.so.0 (0x00007f3ba864c000)
>> > >>> >> libexpat.so.1 => /lib64/libexpat.so.1 (0x0000003281c00000)
>> > >>> >> libapr-1.so.0 => /usr/local/httpd-2.4.12/lib/libapr-1.so.0
>> > >>> >> (0x00007f3ba8417000)
>> > >>> >> librt.so.1 => /lib64/librt.so.1 (0x000000327dc00000)
>> > >>> >> libcrypt.so.1 => /lib64/libcrypt.so.1 (0x00000036c2400000)
>> > >>> >> libpthread.so.0 => /lib64/libpthread.so.0
>> > >>> >> (0x000000327d400000)
>> > >>> >> libc.so.6 => /lib64/libc.so.6 (0x000000327d000000)
>> > >>> >> /lib64/ld-linux-x86-64.so.2 (0x000000327cc00000)
>> > >>> >> libfreebl3.so => /lib64/libfreebl3.so (0x00000036c2800000)
>> > >>> >> libdl.so.2 => /lib64/libdl.so.2 (0x000000327d800000)
>> > >>> >>
>> > >>> >>
>> > >>> >> *** (apr|apu)-config linking info
>> > >>> >>
>> > >>> >> -L/usr/local/httpd-2.4.12/lib -laprutil-1 -lexpat
>> > >>> >> -L/usr/local/httpd-2.4.12/lib -lapr-1 -lrt -lcrypt -lpthread
>> > >>> >>
>> > >>> >>
>> > >>> >>
>> > >>> >> *** /usr/local/bin/perl -V
>> > >>> >> Summary of my perl5 (revision 5 version 20 subversion 2)
>> > >>> >> configuration:
>> > >>> >>
>> > >>> >> Platform:
>> > >>> >> osname=linux, osvers=2.6.32-504.8.1.el6.x86_64,
>> > >>> >> archname=x86_64-linux-thread-multi
>> > >>> >> uname='linux xxx.xxx.xxx.xx 2.6.32-504.8.1.el6.x86_64 #1 smp
>> > >>> >> fri dec 19 12:09:25 est 2014 x86_64 x86_64 x86_64 gnulinux '
>> > >>> >> config_args='-Dusethreads -Dprefix=/usr/local -des -A
>> > >>> >> ccflags=-fPIC'
>> > >>> >> hint=recommended, useposix=true, d_sigaction=define
>> > >>> >> useithreads=define, usemultiplicity=define
>> > >>> >> use64bitint=define, use64bitall=define, uselongdouble=undef
>> > >>> >> usemymalloc=n, bincompat5005=undef
>> > >>> >> Compiler:
>> > >>> >> cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fPIC -fwrapv
>> > >>> >> -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include
>> > >>> >> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
>> > >>> >> optimize='-O2',
>> > >>> >> cppflags='-D_REENTRANT -D_GNU_SOURCE -fPIC -fwrapv
>> > >>> >> -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
>> > >>> >> ccversion='', gccversion='4.4.7 20120313 (Red Hat 4.4.7-11)',
>> > >>> >> gccosandvers=''
>> > >>> >> intsize=4, longsize=8, ptrsize=8, doublesize=8,
>> > >>> >> byteorder=12345678
>> > >>> >> d_longlong=define, longlongsize=8, d_longdbl=define,
>> > >>> >> longdblsize=16
>> > >>> >> ivtype='long', ivsize=8, nvtype='double', nvsize=8,
>> > >>> >> Off_t='off_t', lseeksize=8
>> > >>> >> alignbytes=8, prototype=define
>> > >>> >> Linker and Libraries:
>> > >>> >> ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
>> > >>> >> libpth=/usr/local/lib /usr/lib /lib/../lib64 /usr/lib/../lib64
>> > >>> >> /lib /lib64 /usr/lib64 /usr/local/lib64
>> > >>> >> libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
>> > >>> >> perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
>> > >>> >> libc=libc-2.12.so, so=so, useshrplib=false, libperl=libperl.a
>> > >>> >> gnulibc_version='2.12'
>> > >>> >> Dynamic Linking:
>> > >>> >> dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef,
>> > >>> >> ccdlflags='-Wl,-E'
>> > >>> >> cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib
>> > >>> >> -fstack-protector'
>> > >>> >>
>> > >>> >>
>> > >>> >> Characteristics of this binary (from libperl):
>> > >>> >> Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
>> > >>> >> PERL_DONT_CREATE_GVSV
>> > >>> >> PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
>> > >>> >> PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
>> > >>> >> PERL_NEW_COPY_ON_WRITE PERL_PRESERVE_IVUV
>> > >>> >> USE_64_BIT_ALL USE_64_BIT_INT USE_ITHREADS
>> > >>> >> USE_LARGE_FILES USE_LOCALE
>> > >>> >> USE_LOCALE_COLLATE
>> > >>> >> USE_LOCALE_CTYPE USE_LOCALE_NUMERIC
>> > >>> >> USE_PERLIO
>> > >>> >> USE_PERL_ATOF USE_REENTRANT_API
>> > >>> >> Built under linux
>> > >>> >> Compiled at Feb 25 2015 15:58:55
>> > >>> >> %ENV:
>> > >>> >> PERL_LWP_USE_HTTP_10="1"
>> > >>> >> @INC:
>> > >>> >> /usr/local/lib/perl5/site_perl/5.20.2/x86_64-linux-thread-multi
>> > >>> >> /usr/local/lib/perl5/site_perl/5.20.2
>> > >>> >> /usr/local/lib/perl5/5.20.2/x86_64-linux-thread-multi
>> > >>> >> /usr/local/lib/perl5/5.20.2
>> > >>> >> /usr/local/lib/perl5/site_perl/5.18.2
>> > >>> >> /usr/local/lib/perl5/site_perl/5.18.0
>> > >>> >> /usr/local/lib/perl5/site_perl
>> > >>> >> .
>> > >>> >>
>> > >>> >> *** Packages of interest status:
>> > >>> >>
>> > >>> >> Apache2 : -
>> > >>> >> Apache2::Request : -
>> > >>> >> CGI : 3.65
>> > >>> >> ExtUtils::MakeMaker: 6.98
>> > >>> >> LWP : 5.837
>> > >>> >> mod_perl : -
>> > >>> >> mod_perl2 : 2.000009
>> > >>> >>
>> > >>> >>
>> > >>> >> 3. This is the core dump trace: (if you get a core dump):
>> > >>> >>
>> > >>> >> [CORE TRACE COMES HERE]
>> > >>> >>
>> > >>> >> This report was generated by bin/mp2bug on Sun Mar 1 06:21:21 2015
>> > >>> >> GMT.
>> > >>> >>
>> > >>> >> -------------8<---------- End Bug Report --------------8<----------
>> > >>> >>
>> > >>> >> # ls -al /usr/local/httpd-2.4.12/lib/
>> > >>> >> total 4108
>> > >>> >> drwxr-xr-x. 4 root root 4096 Feb 27 20:07 .
>> > >>> >> drwxr-xr-x. 15 root root 4096 Feb 27 20:07 ..
>> > >>> >> -rw-r--r--. 1 root root 9262 Feb 27 20:07 apr.exp
>> > >>> >> drwxr-xr-x. 2 root root 4096 Feb 27 20:07 apr-util-1
>> > >>> >> -rw-r--r--. 1 root root 5272 Feb 27 20:07 aprutil.exp
>> > >>> >> -rw-r--r--. 1 root root 1685642 Feb 27 20:07 libapr-1.a
>> > >>> >> -rwxr-xr-x. 1 root root 969 Feb 27 20:07 libapr-1.la
>> > >>> >> lrwxrwxrwx. 1 root root 17 Feb 27 20:07 libapr-1.so ->
>> > >>> >> libapr-1.so.0.5.1
>> > >>> >> lrwxrwxrwx. 1 root root 17 Feb 27 20:07 libapr-1.so.0 ->
>> > >>> >> libapr-1.so.0.5.1
>> > >>> >> -rwxr-xr-x. 1 root root 858051 Feb 27 20:07 libapr-1.so.0.5.1
>> > >>> >> -rw-r--r--. 1 root root 1022024 Feb 27 20:07 libaprutil-1.a
>> > >>> >> -rwxr-xr-x. 1 root root 1045 Feb 27 20:07 libaprutil-1.la
>> > >>> >> lrwxrwxrwx. 1 root root 21 Feb 27 20:07 libaprutil-1.so ->
>> > >>> >> libaprutil-1.so.0.5.4
>> > >>> >> lrwxrwxrwx. 1 root root 21 Feb 27 20:07 libaprutil-1.so.0 ->
>> > >>> >> libaprutil-1.so.0.5.4
>> > >>> >> -rwxr-xr-x. 1 root root 589222 Feb 27 20:07 libaprutil-1.so.0.5.4
>> > >>> >> drwxr-xr-x. 2 root root 4096 Feb 27 20:07 pkgconfig
>> > >>> >>
>> > >>> >>
>> > >>> >>
>> > >>> >>
>> > >>> >>
>> > >>> >>
>> > >>> >> Regards,
>> > >>> >>
>> > >>> >>
>> > >>> >> Jie.
>> > >>> >>
>> > >>> >>
>> > >>> >>
---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscr...@perl.apache.org
For additional commands, e-mail: dev-h...@perl.apache.org
