Hi André, Am 21.03.09 11:58, André Schnabel schrieb: > Ok - so although I did not meet the "0" errors that are shown in QUASTE > for the english builds I went on and did uplaod my results. > > And then I was quite surprised: QUASTE showed *green* for the German > builds. My 5 errors including one showstopper do not matter for the > Quaste status. > (I checked if they have been correctly submitted - they were. But Quaste > does not look for the results of these certain tests).
it would be *really* helpful if you could post what test created those results and send me the result file from testtool so that I am able to find out the problem and get it fixed in QUASTe. I checked all our resultfiles and compared them with the results shown in QUASTe and they are matching. Be sure I wouldn't post such important things without being safe those results are true precisely because QUASTe is still Beta. I assume you checked all your result files and compared them with the output of makesummry.pl to be sure the script works well too. > I wonder, what it's worth to run the tests if the tool that should be > used for publishing the results is likely to ignore errors? Not only > that I run severa tests that are not analysed, even a stopper issue has > been ignored! As stated before please be more precise on this what tests were not analyzed and what stopper wasn't found. Regards Helge -- =============================================================== Sun Microsystems GmbH Helge Delfs Nagelsweg 55 Quality Assurance Engineer 20097 Hamburg OOo Team Lead Automation http://qa.openoffice.org mailto:[email protected] http://wiki.services.openoffice.org/wiki/User:Hde --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
