Hi Alex,
Unfortunately in the next couple of days I won't have time for that. If
someone can do that feel free jump into it.
Piotr
On Thu, Oct 11, 2018, 6:43 PM Alex Harui <aha...@adobe.com.invalid> wrote:
> After digging through the output you pasted, it appears that the
> "check-empty-folder" target isn't quite right and didn't catch that you
> didn't run "maven" against an empty folder. Although I am a bit puzzled
> why there were modified files in the working copy.
>
> Maven and the scripts have some expectation that you are starting from the
> beginning, so if Maven got far enough to create a tag and you have to start
> over, you have to remove the tag. These scripts are still under
> development so you should not expect that every situation has been
> accounted for.
>
> So, go delete the tag. Instructions for doing so are in the wiki. Maybe
> figure out why those files were modified, but maybe because your earlier
> run didn't have the right gpg password.
>
> Try changing the check-empty-folder to also test for:
>
> <available file="${basedir}/royale-asjs/build.properties"
> type="file"
> property="found.build.properties" value="true" />
>
> Then it should catch you on the steps where you are supposed to start by
> pulling down the repos again.
>
> If you don't have time for any of that, let us know here so the next RM
> can know where to start.
>
> -Alex
>
> On 10/11/18, 2:05 AM, "Piotr Zarzycki" <piotrzarzyck...@gmail.com> wrote:
>
> I gave up again :) It costs me to much time. I thought since Om did so
> much
> progress I will launch the script and will work. It's still failing.
>
>
> https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FWJ44&data=02%7C01%7Caharui%40adobe.com%7C7b4f4f106a0e4832f0bc08d62f58b09f%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636748455300137124&sdata=VPvmFmVVt4GPIN49a2PqnG5D%2BvyQRELMH9rmntm1%2BcE%3D&reserved=0
>
> I run first time and had problem with gpg password - just forgot it,
> but
> run it again and type correct password. Probably first time this tag
> was
> created and now script failing cause tag exits. Never ending story.
>
> I'm in that step - If someone would like to try it out let me know and
> I
> won't revert anything for now:
>
> ant -f releasecandidate.xml -Drelease.version="0.9.4"
> -Dbrowser="c:\Program
> Files\Mozilla Firefox\firefox.exe" -Drc=1 maven
>
> Thanks,
> Piotr
>
>
> czw., 11 paź 2018 o 10:13 Piotr Zarzycki <piotrzarzyck...@gmail.com>
> napisał(a):
>
> > Hi Alex,
> >
> > This is what I'm getting for git status for royale-compiler [1]
> >
> > [1]
> https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FYuiH&data=02%7C01%7Caharui%40adobe.com%7C7b4f4f106a0e4832f0bc08d62f58b09f%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636748455300137124&sdata=gXJ6R%2Fdf0DFd8vp16PjOONvUoqJpm5q7ajbdG5DsQMY%3D&reserved=0
> >
> > Thanks,
> > Piotr
> >
> > śr., 10 paź 2018 o 17:50 Alex Harui <aha...@adobe.com.invalid>
> napisał(a):
> >
> >> What does 'git status' return for that local copy of the
> royale-compiler
> >> repo?
> >>
> >> That part of the script is trying to see if compiler-jburg-types and
> >> compiler-build-tools needed a version update that needs to be
> pushed.
> >> Those two projects should be at 1.0.0 since we rarely, if ever,
> will need
> >> to modify it. There shouldn't have been modifications in this
> release, yet
> >> Git status is reporting modifications to some file. A test is done
> to
> >> check for the word "modified:" in the 'git status' output, then that
> >> attempt to push is executed. Somehow, the git status is implying
> >> modifications but the files we are trying to push are not modified.
> >>
> >> The solutions should not require reverting of the release branch.
> It
> >> looks like you have successfully created a correct set of branches
> and the
> >> steps you are running start by pulling down the release branch. I
> didn't
> >> see any commits to the release branch from the scripts, so to
> re-start, it
> >> should just be manually deleting the local copies of the repos and
> running
> >> the Ant command again after making one of the changes to
> >> releasecandidate.xml I will describe below:
> >>
> >> IMO, the choices are (and there may be more choices)
> >> 1. Figure out how to be smarter about what 'git status' output
> will say
> >> so the test works correctly
> >> 2. Set failonerror="false" on the push step and not care if that
> push
> >> succeeds. This is slightly risky if we ever do want to push
> changes, but
> >> again, that is low probability, IMO.
> >> 3. Comment out those steps since it will be rare we will need
> them. If
> >> we do need them some day, the RM will have to remember to uncomment
> those
> >> steps.
> >>
> >> HTH,
> >> -Alex
> >>
> >> On 10/10/18, 2:52 AM, "Piotr Zarzycki" <piotrzarzyck...@gmail.com>
> >> wrote:
> >>
> >> Ok It's failed :) However I passed step 3 in instruction. Step
> 4 is
> >> failing
> >> [1] - if someone know what could it be - I will wait with
> reverting
> >> changes.
> >>
> >> Lines in stacktrace are pointing in ant script to following
> targets:
> >>
> >> Line 556: git-commit-and-push-utils
> >> Line 487: git-commit-and-push-utils-if-modified
> >> Line 473:
> >>
> >> <exec executable="${git}" dir="${compiler}" failonerror="true" >
> >> <arg value="commit" />
> >> <arg value="-m" />
> >> <arg value="remove SNAPSHOT from
> compiler-jburg-types and
> >> compiler-build-tools versions" />
> >> </exec>
> >>
> >> [1]
> >>
> https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2Fbg5e&data=02%7C01%7Caharui%40adobe.com%7C7b4f4f106a0e4832f0bc08d62f58b09f%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636748455300137124&sdata=EgkW%2BtCG8WM229zkua3ObIqpQR0PJ29LjvKdsFijY9E%3D&reserved=0
> >>
> >> Thanks,
> >> Piotr
> >>
> >>
> >> śr., 10 paź 2018 o 11:34 Carlos Rovira <carlosrov...@apache.org
> >
> >> napisał(a):
> >>
> >> > Ok Piotr, good luck! :)
> >> >
> >> > El mié., 10 oct. 2018 a las 10:34, Piotr Zarzycki (<
> >> > piotrzarzyck...@gmail.com>) escribió:
> >> >
> >> > > Hi Guys,
> >> > >
> >> > > I will try right now process from my PC. We will see how
> far I
> >> will go
> >> > with
> >> > > that.
> >> > >
> >> > > Piotr
> >> > >
> >> > > czw., 4 paź 2018 o 22:01 Alex Harui
> <aha...@adobe.com.invalid>
> >> > napisał(a):
> >> > >
> >> > > > Hi Om,
> >> > > >
> >> > > > If make_branches succeeds, then you shouldn't need to go
> back
> >> and
> >> > delete
> >> > > > branches and tags and run make_branches again if the
> "maven"
> >> step
> >> > fails.
> >> > > >
> >> > > > You might need to revert any changes to the release
> branch that
> >> the
> >> > > > "maven" step did, but then you should be able to delete
> the
> >> local copy
> >> > of
> >> > > > the branches and start again with "maven" or
> >> > > > "maven_skip_compiler_and_typedefs" if you got all the way
> up to
> >> > > royale-asjs.
> >> > > >
> >> > > > What are some of the 200+ files that don't get reverted
> back to
> >> 0.9.4?
> >> > > >
> >> > > > You are welcome to try to add the "continue" option. I
> would
> >> suggest
> >> > > > adding a dummy parameter. So if the script currently
> calls
> >> Maven like
> >> > > this:
> >> > > >
> >> > > > <exec executable="${mvn}"
> >> dir="${basedir}/maven-release-plugin"
> >> > > > failonerror="true" >
> >> > > > <arg value="clean" />
> >> > > > <arg value="install" />
> >> > > > </exec>
> >> > > >
> >> > > > You can try changing it to something like this:
> >> > > >
> >> > > > <property name="continueOption" value="-Ddummy=0"
> />
> >> > > > <exec executable="${mvn}"
> >> dir="${basedir}/maven-release-plugin"
> >> > > > failonerror="true" >
> >> > > > <arg value="${continueOption}" />
> >> > > > <arg value="clean" />
> >> > > > <arg value="install" />
> >> > > > </exec>
> >> > > >
> >> > > > Then you should be able to set in your local.properties:
> >> > > >
> >> > > > continueOption=-rf JewelExample
> >> > > >
> >> > > > You will probably need to use different names for each
> call to
> >> Maven so
> >> > > > subsequent Maven calls don't pick up the same option.
> >> > > >
> >> > > > HTH,
> >> > > > -Alex
> >> > > >
> >> > > > On 10/4/18, 11:58 AM, "OmPrakash Muppirala" <
> >> bigosma...@gmail.com>
> >> > > wrote:
> >> > > >
> >> > > > On Thu, Oct 4, 2018 at 1:48 AM Alex Harui
> >> <aha...@adobe.com.invalid
> >> > >
> >> > > > wrote:
> >> > > >
> >> > > > > Om, it looks like you are still deleting and
> recreating
> >> the
> >> > > branches.
> >> > > > > Does this mean you have never completed the
> make_branches
> >> step?
> >> > > >
> >> > > >
> >> > > > Yes, I delete the tags, branches (remote) each time
> >> something
> >> > fails.
> >> > > > Then
> >> > > > I do a global search for 0.9.5 and replace it with
> 0.9.4
> >> (some 200+
> >> > > > files
> >> > > > across 3 repos), then push them into remote/develop.
> >> > > >
> >> > > > Then I do the make_branches step first. Then do a
> git push
> >> in
> >> > > > roayale-asjs
> >> > > > as per the instructions in the commandline. I have
> never
> >> had issues
> >> > > > with
> >> > > > this step. It is always the maven step that fails
> for some
> >> reason
> >> > or
> >> > > > the
> >> > > > other.
> >> > > >
> >> > > >
> >> > > > > Is make_branches failing trying to run a build in
> the
> >> develop
> >> > > branch
> >> > > > and
> >> > > > > uploading 0.9.5-SNAPSHOT artifacts?
> >> > > >
> >> > > >
> >> > > > No
> >> > > >
> >> > > >
> >> > > > > I supposed we could try to find a way to skip that,
> but
> >> you will
> >> > > need
> >> > > > > reliable uploading to repository.a.o to be an RM
> without
> >> going
> >> > > crazy.
> >> > > > >
> >> > > >
> >> > > > Hmm, I use the same internet connection for personal
> and
> >> work
> >> > related
> >> > > > activities. I don't usually have issues with
> internet.
> >> Either we
> >> > > are
> >> > > > very
> >> > > > unlucky here or we need a more reselient way to pick
> up
> >> things if
> >> > we
> >> > > > lose
> >> > > > internet connectivity momentarily.
> >> > > >
> >> > > > It takes upwards of 90 minutes of uploading stuff. I
> dont
> >> do this
> >> > > kind
> >> > > > of
> >> > > > uploading for my regular work, so that is probably I
> have
> >> never hit
> >> > > > this
> >> > > > issue before.
> >> > > >
> >> > > > I still think that looking into the 'resume-from'
> directive
> >> in
> >> > maven
> >> > > is
> >> > > > worthwhile.
> >> > > >
> >> > > > Thanks,
> >> > > > Om
> >> > > >
> >> > > >
> >> > > > >
> >> > > > > -Alex
> >> > > > >
> >> > > > > On 10/3/18, 2:11 PM, "OmPrakash Muppirala" <
> >> bigosma...@gmail.com
> >> > >
> >> > > > wrote:
> >> > > > >
> >> > > > > On Wed, Oct 3, 2018 at 2:02 PM Alex Harui
> >> > > > <aha...@adobe.com.invalid>
> >> > > > > wrote:
> >> > > > >
> >> > > > > > Hi Om,
> >> > > > > >
> >> > > > > > Does anything deploy, or is that the first
> thing
> >> that is
> >> > > > attempted to
> >> > > > > > deploy? I found this article that might help:
> >> > > > > >
> >> > > > > >
> >> > > > >
> >> > > >
> >> > >
> >> >
> >>
> https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fcommunity.apigee.com%2Fquestions%2F50756%2Funable-to-deploy-using-maven-script-due-to-error-r.html&data=02%7C01%7Caharui%40adobe.com%7C7b4f4f106a0e4832f0bc08d62f58b09f%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636748455300137124&sdata=awLuDDC0qBKtdbrjKvbMgZD6rQ0mC7k%2BrdRK%2Fvkv1to%3D&reserved=0
> >> > > > >
> >> > > > >
> >> > > > > It deployed a lot of artifacts before hitting
> this
> >> error. I
> >> > > > don't see
> >> > > > > anything special with this artifact. So, I am
> >> guessing that
> >> > it
> >> > > > was a
> >> > > > > momentary bad connection that caused this.
> >> > > > >
> >> > > > >
> >> > > > > >
> >> > > > > >
> >> > > > > > I would be concerned about restarting from the
> >> middle of a
> >> > > > Maven
> >> > > > > call. I
> >> > > > > > suppose you could try it, but what if it
> skipped an
> >> > artifact?
> >> > > > > >
> >> > > > >
> >> > > > > The maven error message explicitly says this:
> >> > > > >
> >> > > > > [exec] [INFO] [ERROR] After correcting the
> >> problems, you
> >> > > can
> >> > > > > resume
> >> > > > > the build with the command
> >> > > > >
> >> > > > > [exec] [INFO] [ERROR] mvn <goals> -rf
> >> > > > > :Jewel-Light-NoFlat-Primary-Sunflower-Theme
> >> > > > >
> >> > > > >
> >> > > > > >
> >> > > > > > There should be Ant targets for starting only
> on
> >> > royale-asjs
> >> > > if
> >> > > > > > royale-compiler and royale=typedefs worked ok.
> >> > > > > >
> >> > > > > > HTH,
> >> > > > > > -Alex
> >> > > > > >
> >> > > > > > On 10/3/18, 11:58 AM, "OmPrakash Muppirala" <
> >> > > > bigosma...@gmail.com>
> >> > > > > wrote:
> >> > > > > >
> >> > > > > > Another suggestion I have is - can we do
> all
> >> the pushes
> >> > > to
> >> > > > > remote after
> >> > > > > > everything is done locally? That way, if
> >> something
> >> > goes
> >> > > > wrong
> >> > > > > > halfway, we
> >> > > > > > can just delete the royale-* dirs locally
> and
> >> rerun the
> >> > > > > > releasecandiate ant
> >> > > > > > script?
> >> > > > > >
> >> > > > > > Not sure if this is an easy change?
> >> > > > > >
> >> > > > > > Thanks,
> >> > > > > > Om
> >> > > > > >
> >> > > > > > On Wed, Oct 3, 2018 at 11:42 AM OmPrakash
> >> Muppirala <
> >> > > > > > bigosma...@gmail.com>
> >> > > > > > wrote:
> >> > > > > >
> >> > > > > > > Okay, I tried a couple of times and I
> have
> >> started
> >> > > > getting
> >> > > > > `SSL peer
> >> > > > > > shut
> >> > > > > > > down incorrectly errors`
> >> > > > > > >
> >> > > > > > > [exec] [INFO] [INFO]
> >> > > > > > >
> >> > > > > >
> >> > > > >
> >> > > >
> >> >
> >>
> ------------------------------------------------------------------------
> >> > > > > > >
> >> > > > > > > [exec] [INFO] [INFO] BUILD FAILURE
> >> > > > > > >
> >> > > > > > > [exec] [INFO] [INFO]
> >> > > > > > >
> >> > > > > >
> >> > > > >
> >> > > >
> >> >
> >>
> ------------------------------------------------------------------------
> >> > > > > > >
> >> > > > > > > [exec] [INFO] [INFO] Total time:
> 16:04
> >> min
> >> > > > > > >
> >> > > > > > > [exec] [INFO] [INFO] Finished at:
> >> > > > > 2018-10-03T11:38:49-07:00
> >> > > > > > >
> >> > > > > > > [exec] [INFO] [INFO]
> >> > > > > > >
> >> > > > > >
> >> > > > >
> >> > > >
> >> >
> >>
> ------------------------------------------------------------------------
> >> > > > > > >
> >> > > > > > > [exec] [INFO] [ERROR] Failed to
> execute
> >> goal
> >> > > > > > >
> >> > > org.apache.maven.plugins:maven-deploy-plugin:2.8.2:deploy
> >> > > > > > (default-deploy)
> >> > > > > > > on project
> >> > Jewel-Light-NoFlat-Primary-Sunflower-Theme:
> >> > > > Failed
> >> > > > > to
> >> > > > > > deploy
> >> > > > > > > artifacts: Could not transfer artifact
> >> > > > > > >
> >> > > > > >
> >> > > > >
> >> > > >
> >> > >
> >> >
> >>
> org.apache.royale.framework:Jewel-Light-NoFlat-Primary-Sunflower-Theme:swc:0.9.4
> >> > > > > > > from/to apache.releases.https (
> >> > > > > > >
> >> > > > > >
> >> > > > >
> >> > > >
> >> > >
> >> >
> >>
> https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Frepository.apache.org%2Fservice%2Flocal%2Fstaging%2Fdeploy%2Fmaven2&data=02%7C01%7Caharui%40adobe.com%7C7b4f4f106a0e4832f0bc08d62f58b09f%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636748455300137124&sdata=1C5tkO6gLEDUOXGLZgwQSkx25Ud8bUG2X6d1DQCaPmQ%3D&reserved=0
> >> > > > > > ):
> >> > > > > > > Remote host closed connection during
> >> handshake: SSL
> >> > > peer
> >> > > > shut
> >> > > > > down
> >> > > > > > > incorrectly -> [Help 1]
> >> > > > > > >
> >> > > > > > > [exec] [INFO] [ERROR]
> >> > > > > > >
> >> > > > > > > [exec] [INFO] [ERROR] To see the
> full
> >> stack
> >> > trace
> >> > > > of the
> >> > > > > errors,
> >> > > > > > > re-run Maven with the -e switch.
> >> > > > > > >
> >> > > > > > > [exec] [INFO] [ERROR] Re-run Maven
> using
> >> the -X
> >> > > > switch to
> >> > > > > enable
> >> > > > > > > full debug logging.
> >> > > > > > >
> >> > > > > > > [exec] [INFO] [ERROR]
> >> > > > > > >
> >> > > > > > > [exec] [INFO] [ERROR] For more
> >> information about
> >> > > the
> >> > > > > errors and
> >> > > > > > > possible solutions, please read the
> following
> >> > articles:
> >> > > > > > >
> >> > > > > > > [exec] [INFO] [ERROR] [Help 1]
> >> > > > > > >
> >> > > > > >
> >> > > > >
> >> > > >
> >> > >
> >> >
> >>
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fcwiki.apache.org%2Fconfluence%2Fdisplay%2FMAVEN%2FMojoExecutionException&data=02%7C01%7Caharui%40adobe.com%7C7b4f4f106a0e4832f0bc08d62f58b09f%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636748455300147133&sdata=hvNM5inigC4ldfW8OqDU%2BnocoR%2BZqewteKhWKFdk7bk%3D&reserved=0
> >> > > > > > >
> >> > > > > > > [exec] [INFO] [ERROR]
> >> > > > > > >
> >> > > > > > > [exec] [INFO] [ERROR] After
> correcting
> >> the
> >> > > > problems, you
> >> > > > > can
> >> > > > > > resume
> >> > > > > > > the build with the command
> >> > > > > > >
> >> > > > > > > [exec] [INFO] [ERROR] mvn
> <goals> -rf
> >> > > > > > >
> :Jewel-Light-NoFlat-Primary-Sunflower-Theme
> >> > > > > > >
> >> > > > > > > [exec] [INFO]
> >> > > > > > >
> >> > > > > >
> >> > > > >
> >> > > >
> >> >
> >>
> ------------------------------------------------------------------------
> >> > > > > > >
> >> > > > > > >
> >> > > > > > > I am guessing it is a bad internet
> >> connection. I am
> >> > > > wondering
> >> > > > > if we
> >> > > > > > can
> >> > > > > > > pass a -rf (resume from) option to the
> maven
> >> call
> >> > from
> >> > > > ant?
> >> > > > > > Otherwise
> >> > > > > > > doing all this from scratch everytime
> is a
> >> big pain.
> >> > > > > > >
> >> > > > > > > Thanks,
> >> > > > > > > Om
> >> > > > > > >
> >> > > > > > > On Wed, Oct 3, 2018 at 12:47 AM Alex
> Harui
> >> > > > > <aha...@adobe.com.invalid
> >> > > > > > >
> >> > > > > > > wrote:
> >> > > > > > >
> >> > > > > > >> Looks like it was a missing [
> >> > > > > > >>
> >> > > > > > >> MXRoyale and SparkRoyale built for me.
> >> > > > > > >>
> >> > > > > > >> HTH,
> >> > > > > > >> -Alex
> >> > > > > > >>
> >> > > > > > >> On 10/3/18, 12:43 AM, "OmPrakash
> Muppirala" <
> >> > > > > bigosma...@gmail.com>
> >> > > > > > >> wrote:
> >> > > > > > >>
> >> > > > > > >> Thanks!
> >> > > > > > >>
> >> > > > > > >> I reverted everything back to
> previous
> >> state. I
> >> > > > can give
> >> > > > > it a
> >> > > > > > shot
> >> > > > > > >> tomorrow evening.
> >> > > > > > >>
> >> > > > > > >> Regards,
> >> > > > > > >> Om
> >> > > > > > >>
> >> > > > > > >> On Wed, Oct 3, 2018 at 12:41 AM
> Alex
> >> Harui
> >> > > > > > <aha...@adobe.com.invalid>
> >> > > > > > >> wrote:
> >> > > > > > >>
> >> > > > > > >> > It was in a releasable state.
> >> TourDeFlex was
> >> > > > running
> >> > > > > on it.
> >> > > > > > >> >
> >> > > > > > >> > I'm trying to track down the
> change
> >> that broke
> >> > > it.
> >> > > > > > >> >
> >> > > > > > >> > -Alex
> >> > > > > > >> >
> >> > > > > > >> > On 10/3/18, 12:32 AM, "OmPrakash
> >> Muppirala" <
> >> > > > > > bigosma...@gmail.com>
> >> > > > > > >> wrote:
> >> > > > > > >> >
> >> > > > > > >> > A bit more progress. Now we
> are
> >> failing on
> >> > > the
> >> > > > > MXRoyale
> >> > > > > > project:
> >> > > > > > >> >
> >> > > > > > >> > [exec] [INFO] [INFO]
> >> > > > > > >> >
> >> > > > > > >> >
> >> > > > > > >>
> >> > > > > >
> >> > > > >
> >> > > >
> >> >
> >>
> ------------------------------------------------------------------------
> >> > > > > > >> >
> >> > > > > > >> > [exec] [INFO] [INFO]
> BUILD
> >> FAILURE
> >> > > > > > >> >
> >> > > > > > >> > [exec] [INFO] [INFO]
> >> > > > > > >> >
> >> > > > > > >> >
> >> > > > > > >>
> >> > > > > >
> >> > > > >
> >> > > >
> >> >
> >>
> ------------------------------------------------------------------------
> >> > > > > > >> >
> >> > > > > > >> > [exec] [INFO] [INFO]
> Total
> >> time:
> >> > 01:34
> >> > > > min
> >> > > > > > >> >
> >> > > > > > >> > [exec] [INFO] [INFO]
> Finished
> >> at:
> >> > > > > > 2018-10-03T00:28:14-07:00
> >> > > > > > >> >
> >> > > > > > >> > [exec] [INFO] [INFO]
> >> > > > > > >> >
> >> > > > > > >> >
> >> > > > > > >>
> >> > > > > >
> >> > > > >
> >> > > >
> >> >
> >>
> ------------------------------------------------------------------------
> >> > > > > > >> >
> >> > > > > > >> > [exec] [INFO] [ERROR]
> Failed
> >> to
> >> > execute
> >> > > > goal
> >> > > > > > >> >
> >> > > > > >
> >> > > >
> org.apache.royale.compiler:royale-maven-plugin:0.9.4:compile-as
> >> > > > > > >> > (default-compile-as) on
> project
> >> MXRoyale:
> >> > > > There were
> >> > > > > > errors
> >> > > > > > >> during the
> >> > > > > > >> > build. Got return code 3 ->
> [Help
> >> 1]
> >> > > > > > >> >
> >> > > > > > >> > [exec] [INFO] [ERROR]
> >> > > > > > >> >
> >> > > > > > >> > [exec] [INFO] [ERROR]
> To see
> >> the full
> >> > > > stack
> >> > > > > trace of
> >> > > > > > the
> >> > > > > > >> errors,
> >> > > > > > >> > re-run Maven with the -e
> switch.
> >> > > > > > >> >
> >> > > > > > >> > [exec] [INFO] [ERROR]
> Re-run
> >> Maven
> >> > > using
> >> > > > the -X
> >> > > > > > switch to
> >> > > > > > >> enable
> >> > > > > > >> > full
> >> > > > > > >> > debug logging.
> >> > > > > > >> >
> >> > > > > > >> > [exec] [INFO] [ERROR]
> >> > > > > > >> >
> >> > > > > > >> > [exec] [INFO] [ERROR]
> For more
> >> > > > information
> >> > > > > about the
> >> > > > > > >> errors and
> >> > > > > > >> > possible solutions, please
> read the
> >> > > following
> >> > > > > articles:
> >> > > > > > >> >
> >> > > > > > >> > [exec] [INFO] [ERROR]
> [Help 1]
> >> > > > > > >> >
> >> > > > > > >> >
> >> > > > > > >>
> >> > > > > >
> >> > > > >
> >> > > >
> >> > >
> >> >
> >>
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fcwiki.apache.org%2Fconfluence%2Fdisplay%2FMAVEN%2FMojoExecutionException&data=02%7C01%7Caharui%40adobe.com%7C7b4f4f106a0e4832f0bc08d62f58b09f%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636748455300147133&sdata=hvNM5inigC4ldfW8OqDU%2BnocoR%2BZqewteKhWKFdk7bk%3D&reserved=0
> >> > > > > > >> >
> >> > > > > > >> > [exec] [INFO] [ERROR]
> >> > > > > > >> >
> >> > > > > > >> > [exec] [INFO] [ERROR]
> After
> >> > correcting
> >> > > > the
> >> > > > > problems,
> >> > > > > > you
> >> > > > > > >> can
> >> > > > > > >> > resume
> >> > > > > > >> > the build with the command
> >> > > > > > >> >
> >> > > > > > >> > [exec] [INFO] [ERROR]
> mvn
> >> <goals>
> >> > -rf
> >> > > > > :MXRoyale
> >> > > > > > >> >
> >> > > > > > >> >
> >> > > > > > >> > Can we perhaps turn this
> project
> >> off? Is
> >> > it
> >> > > > in a
> >> > > > > > releasable
> >> > > > > > >> state?
> >> > > > > > >> >
> >> > > > > > >> > On Tue, Oct 2, 2018 at 7:30
> PM
> >> OmPrakash
> >> > > > Muppirala <
> >> > > > > > >> > bigosma...@gmail.com>
> >> > > > > > >> > wrote:
> >> > > > > > >> >
> >> > > > > > >> > > I'm going to give this
> another
> >> shot in a
> >> > > > couple of
> >> > > > > > hours,
> >> > > > > > >> unless
> >> > > > > > >> > there are
> >> > > > > > >> > > any objections.
> >> > > > > > >> > >
> >> > > > > > >> > > Thanks,
> >> > > > > > >> > > Om
> >> > > > > > >> > >
> >> > > > > > >> > > On Mon, Oct 1, 2018, 2:04
> PM
> >> Alex Harui
> >> > > > > > >> <aha...@adobe.com.invalid>
> >> > > > > > >> > wrote:
> >> > > > > > >> > >
> >> > > > > > >> > >> Jewel is mentioned in
> there. I
> >> added
> >> > > > mention of
> >> > > > > the
> >> > > > > > >> migration
> >> > > > > > >> > components
> >> > > > > > >> > >> and tour de flex. Not
> sure if
> >> I got
> >> > the
> >> > > > > formatting
> >> > > > > > right.
> >> > > > > > >> I think
> >> > > > > > >> > it is
> >> > > > > > >> > >> good enough.
> >> > > > > > >> > >>
> >> > > > > > >> > >> -Alex
> >> > > > > > >> > >>
> >> > > > > > >> > >> On 10/1/18, 12:13 PM,
> "OmPrakash
> >> > > > Muppirala" <
> >> > > > > > >> bigosma...@gmail.com>
> >> > > > > > >> > >> wrote:
> >> > > > > > >> > >>
> >> > > > > > >> > >> I updated it,
> although it
> >> looks a
> >> > bit
> >> > > > sparse
> >> > > > > now.
> >> > > > > > Can
> >> > > > > > >> we list
> >> > > > > > >> > a few
> >> > > > > > >> > >> major
> >> > > > > > >> > >> highlights here, that
> I can
> >> go add
> >> > to
> >> > > > the
> >> > > > > release
> >> > > > > > notes?
> >> > > > > > >> > >> Jewel should at least
> have
> >> several
> >> > > > updates.
> >> > > > > > >> > >>
> >> > > > > > >> > >> Thanks,
> >> > > > > > >> > >> Om
> >> > > > > > >> > >>
> >> > > > > > >> > >> On Mon, Oct 1, 2018 at
> >> 12:09 PM
> >> > Alex
> >> > > > Harui
> >> > > > > > >> > <aha...@adobe.com.invalid>
> >> > > > > > >> > >> wrote:
> >> > > > > > >> > >>
> >> > > > > > >> > >> > Hey, I just noticed
> that
> >> nobody
> >> > put
> >> > > > a 0.9.4
> >> > > > > > section in
> >> > > > > > >> the
> >> > > > > > >> > >> RELEASE_NOTES.
> >> > > > > > >> > >> > Maybe just rename
> the
> >> 0.9.3
> >> > > section?
> >> > > > > > >> > >> >
> >> > > > > > >> > >> > -Alex
> >> > > > > > >> > >> >
> >> > > > > > >> > >> > On 10/1/18, 12:07
> PM,
> >> "OmPrakash
> >> > > > > Muppirala" <
> >> > > > > > >> > bigosma...@gmail.com>
> >> > > > > > >> > >> wrote:
> >> > > > > > >> > >> >
> >> > > > > > >> > >> > Good catch! I
> just
> >> pushed a
> >> > > fix
> >> > > > for
> >> > > > > that.
> >> > > > > > >> > >> >
> >> > > > > > >> > >> > Thanks,
> >> > > > > > >> > >> > Om
> >> > > > > > >> > >> >
> >> > > > > > >> > >> > On Mon, Oct 1,
> 2018
> >> at 11:04
> >> > AM
> >> > > > Alex
> >> > > > > Harui
> >> > > > > > >> > >> <aha...@adobe.com.invalid
> >
> >> > > > > > >> > >> > wrote:
> >> > > > > > >> > >> >
> >> > > > > > >> > >> > > Om,
> >> > > > > > >> > >> > >
> >> > > > > > >> > >> > > I think the
> >> > > > <tag>release/0.9.4</tag>
> >> > > > > in
> >> > > > > > >> > royale-asjs/pom.xml
> >> > > > > > >> > >> needs to
> >> > > > > > >> > >> > be
> >> > > > > > >> > >> > > reverted back
> to
> >> 0.9.3.
> >> > > > > > >> > >> > >
> >> > > > > > >> > >> > > Everything
> else
> >> looks ok
> >> > from
> >> > > > my
> >> > > > > quick
> >> > > > > > >> examination.
> >> > > > > > >> > >> > >
> >> > > > > > >> > >> > > Thanks and
> good
> >> luck,
> >> > > > > > >> > >> > > -Alex
> >> > > > > > >> > >> > >
> >> > > > > > >> > >> > > On 10/1/18,
> 10:29
> >> AM,
> >> > "Piotr
> >> > > > > Zarzycki" <
> >> > > > > > >> > >> piotrzarzyck...@gmail.com
> >
> >> > > > > > >> > >> > wrote:
> >> > > > > > >> > >> > >
> >> > > > > > >> > >> > > I saw your
> >> commit and I
> >> > > > think you
> >> > > > > > should be
> >> > > > > > >> ok.
> >> > > > > > >> > >> > >
> >> > > > > > >> > >> > > pon., 1
> paź
> >> 2018 o
> >> > 19:21
> >> > > > > OmPrakash
> >> > > > > > Muppirala
> >> > > > > > >> <
> >> > > > > > >> > >> >
> bigosma...@gmail.com>
> >> > > > > > >> > >> > >
> napisał(a):
> >> > > > > > >> > >> > >
> >> > > > > > >> > >> > > > Okay, I
> did
> >> the
> >> > > > following to
> >> > > > > reset:
> >> > > > > > >> > >> > > >
> >> > > > > > >> > >> > > > For all
> three
> >> repos:
> >> > > > > > >> > >> > > > *
> Reverted all
> >> > > > references of
> >> > > > > 0.9.5
> >> > > > > > to 0.9.4
> >> > > > > > >> > >> > > > *
> Deleted
> >> 0.9.4-rc1
> >> > tag
> >> > > > > > >> > >> > > > *
> Deleted
> >> branch:
> >> > > > release/
