So I'm running: mvn -DskipTests=true clean install -DdistributionTargetFolder=C:\Temp\RoyaleSDK-with-swf -P with-distribution,option-with-swf
And It's working nicely .. same as mvn -DskipTests=true clean install -DdistributionTargetFolder=C:\Temp\RoyaleSDK-with-swf -P with-distribution Chris -----Ursprüngliche Nachricht----- Von: Piotr Zarzycki <piotrzarzyck...@gmail.com> Gesendet: Mittwoch, 3. März 2021 13:59 An: Apache Royale Development <dev@royale.apache.org> Betreff: Re: [MAVEN DISTRIBUTION] getting the Ant and Maven aligned Unfortunately it didn't work. After build in distribution I have empty folder. Whole build of distribution took 36 seconds, which definitely is not good: [INFO] Reactor Summary for Apache Royale: Distribution 0.9.8-SNAPSHOT: [INFO] [INFO] compc .............................................. SUCCESS [ 8.952 s] [INFO] compiler-asc ....................................... SUCCESS [ 1.559 s] [INFO] compiler-compc ..................................... SUCCESS [ 1.567 s] [INFO] compiler-compjsc ................................... SUCCESS [ 1.284 s] [INFO] compiler-mxmlc ..................................... SUCCESS [ 1.347 s] [INFO] compiler-mxmljsc ................................... SUCCESS [ 1.683 s] [INFO] compiler-optimizer ................................. SUCCESS [ 1.675 s] [INFO] compiler-swfdump ................................... SUCCESS [ 1.295 s] [INFO] mxmlc .............................................. SUCCESS [ 1.305 s] [INFO] Apache Royale: Distribution ........................ SUCCESS [ 14.948 s] [INFO] ------------------------------------------------------------------------ [INFO] BUILD SUCCESS [INFO] ------------------------------------------------------------------------ [INFO] Total time: 36.807 s [INFO] Finished at: 2021-03-03T13:55:54+01:00 [INFO] ------------------------------------------------------------------------ D:\Work\royale-sources\royale-asjs\distribution> I'm not sure what is happening. śr., 3 mar 2021 o 13:32 Christofer Dutz <christofer.d...@c-ware.de> napisał(a): > Hi Piotr, > > sorry for the confusion earlier ... guess that was something that > changed in Maven ... > What you did should work and be all you need. > But be sure to check-out all 3 repos in the feature-branch and run a > mvn install on them as they need one new artifact from compiler and > one new artifact from typedefs. > > Chris > > > -----Ursprüngliche Nachricht----- > Von: Piotr Zarzycki <piotrzarzyck...@gmail.com> > Gesendet: Mittwoch, 3. März 2021 12:09 > An: Apache Royale Development <dev@royale.apache.org> > Betreff: Re: [MAVEN DISTRIBUTION] getting the Ant and Maven aligned > > Cool. I have switched to your branch. How do I generate distribution > now using Maven ? I did that previously by: > > royale-asjs\distribution\ mvn clean compile > -DdistributionTargetFolder=d:\Work\royale_ide\distribution\ > > śr., 3 mar 2021 o 11:43 Christofer Dutz <christofer.d...@c-ware.de> > napisał(a): > > > Ok ... > > > > you don't need to switch all 3 to my "ranch" but to my "branch" - > > Mainly because I don't have a ranch. > > > > But I think I've addressed everything I found ... would be cool if > > you folks could mass-test it. > > > > Chris > > > > -----Ursprüngliche Nachricht----- > > Von: Christofer Dutz <christofer.d...@c-ware.de> > > Gesendet: Mittwoch, 3. März 2021 00:09 > > An: dev@royale.apache.org > > Betreff: Re: [MAVEN DISTRIBUTION] getting the Ant and Maven aligned > > > > And regarding that Halo.swc, > > > > I would use a different one, as using the js typedef really feels a > > bit random. > > But that's something for tomorrow... Signing off for today. > > > > Chris > > > > Holen Sie sich Outlook für Android<https://aka.ms/ghei36> > > > > ________________________________ > > From: Christofer Dutz <christofer.d...@c-ware.de> > > Sent: Wednesday, March 3, 2021 12:06:32 AM > > To: dev@royale.apache.org <dev@royale.apache.org> > > Subject: Re: [MAVEN DISTRIBUTION] getting the Ant and Maven aligned > > > > No, > > > > Unfortunately you need to switch all 3 to my ranch and build all of > > them, cause it produces one more artifact in compiler and in the typedef. > > > > Chris > > > > Holen Sie sich Outlook für Android<https://aka.ms/ghei36> > > > > ________________________________ > > From: Josh Tynjala <joshtynj...@bowlerhat.dev> > > Sent: Tuesday, March 2, 2021 11:14:19 PM > > To: Apache Royale Development <dev@royale.apache.org> > > Subject: Re: [MAVEN DISTRIBUTION] getting the Ant and Maven aligned > > > > I'm guessing that Flash Builder expects > > frameworks/themes/Halo/Halo.swc to exist, and it must be a valid > > .swc file. So, the person who set that up probably just copied one > > of the > existing .swc files. > > > > -- > > Josh Tynjala > > Bowler Hat LLC <https://bowlerhat.dev> > > > > > > On Tue, Mar 2, 2021 at 2:01 PM Christofer Dutz > > <christofer.d...@c-ware.de> > > wrote: > > > > > Hi Josh, > > > > > > Well it would probably take me 10 seconds to add them ... I just > > > didn't want to add stuff we don't need. > > > So I'll leave them away and if someone complains - I'll add them > > > ;-) > > > > > > However the comment in the Ant script says: > > > > > > <!-- fake a bunch of files to make the folder appear like > > > a valid Flex SDK to Flash Builder --> > > > > > > So I already had all the other dummy files in there, so I now just > > > added these. > > > > > > In this block there is however this command which sort of seems > > > pretty strange ... can anyone explain what it's required for? > > > > > > <copy file="${ROYALE_HOME}/js/libs/js.swc" > > > tofile="${ROYALE_HOME}/frameworks/themes/Halo/Halo.swc" /> > > > > > > It looks like just providing some random SWC file in a location > > > the FlashBuilder might be looking for. > > > > > > Perhaps it would make sense to refactor my descriptors to have a > > > "flashbuilder-support-assembly.xml" which we could one day simply > remove. > > > > > > Chris > > > > > > -----Ursprüngliche Nachricht----- > > > Von: Josh Tynjala <joshtynj...@bowlerhat.dev> > > > Gesendet: Dienstag, 2. März 2021 22:47 > > > An: Apache Royale Development <dev@royale.apache.org> > > > Betreff: Re: [MAVEN DISTRIBUTION] getting the Ant and Maven > > > aligned > > > > > > > Can anyone tell me what the localfonts.ser, macfonts.ser and > > > > winfonts.ser > > > files are needed for? > > > > > > It's something related to SWF font embedding. I would assume that > > > Flash Builder expects those files to exist, but if the Flash > > > Builder integration document doesn't mention them, then I don't know. > > > > > > -- > > > Josh Tynjala > > > Bowler Hat LLC <https://bowlerhat.dev> > > > > > > > > > On Tue, Mar 2, 2021 at 1:42 PM Christofer Dutz > > > <christofer.d...@c-ware.de> > > > wrote: > > > > > > > Hi Josh, > > > > > > > > Ok ... so that's done and looks a lot nicer now :-) > > > > > > > > I also finished the config-sanitazion and the config files used > > > > in the Maven distribution should now match the file names in the > > distribution. > > > > > > > > Can anyone tell me what the localfonts.ser, macfonts.ser and > > > > winfonts.ser files are needed for? They are simply completely > > > > empty filed the Ant build createates via "touch" commant. I > > > > could add them to the Maven distribution, but only want to add > > > > stuff > that's needed. > > > > > > > > But in it's current state I'm quite happy with the new distribution. > > > > It looks pretty clean, everything needed is in there and in the > > > > same location as with the Ant build, but I left away things I > > > > tought are probably not required in the distribution and are > > > > results of simply packing the entire project up. > > > > > > > > I tested it with a number of example projects ant it worked with > > > > all of them (Haven't tried all of them though) > > > > > > > > Would be cool if you could try it out and give me some feedback > > > > on > it. > > > > > > > > Chris > > > > > > > > > > > > -----Ursprüngliche Nachricht----- > > > > Von: Josh Tynjala <joshtynj...@bowlerhat.dev> > > > > Gesendet: Dienstag, 2. März 2021 22:35 > > > > An: Apache Royale Development <dev@royale.apache.org> > > > > Betreff: Re: [MAVEN DISTRIBUTION] getting the Ant and Maven > > > > aligned > > > > > > > > The src directory is probably enough for a good IDE experience > > > > while developing a Royale app. > > > > > > > > -- > > > > Josh Tynjala > > > > Bowler Hat LLC <https://bowlerhat.dev> > > > > > > > > > > > > On Tue, Mar 2, 2021 at 1:27 PM Christofer Dutz > > > > <christofer.d...@c-ware.de> > > > > wrote: > > > > > > > > > Hi all, > > > > > > > > > > one question: Is it enough to package up the src directories > > > > > of all modules in the "projects" directory to allow the code-insights? > > > > > > > > > > I'm asking, cause I'm only packing up the essential parts of > > > > > the > > "asjs" > > > > > project and don't want to have a half build system included. > > > > > > > > > > Chris > > > > > > > > > > -----Ursprüngliche Nachricht----- > > > > > Von: Christofer Dutz <christofer.d...@c-ware.de> > > > > > Gesendet: Montag, 1. März 2021 23:18 > > > > > An: dev@royale.apache.org > > > > > Betreff: AW: [MAVEN DISTRIBUTION] getting the Ant and Maven > > > > > aligned > > > > > > > > > > Aaaaah ... ok ... thanks for the explanation. > > > > > > > > > > That does make sense ... guess I just never completely > > > > > understood the typedef stuff ;) > > > > > > > > > > ... so I'll have to find a way to streamline the names of the > > > > > typedef libraries in all of these 2 (Well actually probably > > > > > just > > > > > 2) > > > > > - external-library-path > > > > > - js-external-library-path > > > > > > > > > > But that will be a thing for tomorrow ... calling it a day and > > > > > signing off for today. > > > > > > > > > > I just pushed my changes from today ... so if you folks want > > > > > to check what I'm doing ... now you have something to look at > > > > > :.) > > > > > > > > > > Chris > > > > > > > > > > > > > > > -----Ursprüngliche Nachricht----- > > > > > Von: Josh Tynjala <joshtynj...@bowlerhat.dev> > > > > > Gesendet: Montag, 1. März 2021 23:13 > > > > > An: Apache Royale Development <dev@royale.apache.org> > > > > > Betreff: Re: [MAVEN DISTRIBUTION] getting the Ant and Maven > > > > > aligned > > > > > > > > > > As you've seen, there are three different > > > > > external-library-path > > > options: > > > > > external-library-path, js-external-library-path and > > > > > swf-external-library-path. > > > > > > > > > > By default, external-library-path is used by both JS and SWF > > > > > targets, but you can use js-external-library-path or > > > > > swf-external-library-path to override the > > > > > external-library-path for a > > > specific target. > > > > > > > > > > In other words, if js-external-library-path is defined: > > > > > > > > > > - the JS target will use js-external-library-path, and it will > > > > > ignore external-library-path > > > > > - the SWF target will still use external-library-path > > > > > > > > > > Similarly, if swf-external-library-path is defined: > > > > > > > > > > - the SWF target will use swf-external-library-path, and it > > > > > will ignore external-library-path > > > > > - the JS target will still use external-library-path > > > > > > > > > > If both js-external-library-path and > > > > > swf-external-library-path are > > > > > defined: > > > > > > > > > > - the JS target will use js-external-library-path, and it will > > > > > ignore external-library-path > > > > > - the SWF target will use swf-external-library-path, and it > > > > > will ignore external-library-path > > > > > > > > > > The air-config.xml, flex-config.xml, and royale-config.xml > > > > > configs are all expected to be used for both JS and SWF targets. > > > > > Different libraries are needed for each target, so we're using > > > > > js-external-library-path to override which libraries are used > > > > > for the JS target. The SWF target will use external-library-path. > > > > > > > > > > The other -config.xml files are configs that are expected to > > > > > be used with JS only. Basically, these ones can use > > > > > external-library-path directly because they don't need to > > > > > target SWF. If we wanted, we could change them to use > > > > > js-external-library-path instead, and they should > > > > still work. > > > > > > > > > > In theory, we could always use js-external-library-path and > > > > > swf-external-library-path, and never use external-library-path. > > > > > However, I do not recall if there was some legacy reason (like > > > > > Flash Builder support) for why we defaulted to > > > > > playerglobal.swc on the external-library-path for the SWF > > > > > target instead of using swf-external-library-path. I think > > > > > that js-external-library-path or swf-external-library-path > > > > > were introduced before I started working on > > > > the compiler, so I can only guess. > > > > > > > > > > -- > > > > > Josh Tynjala > > > > > Bowler Hat LLC <https://bowlerhat.dev> > > > > > > > > > > > > > > > On Mon, Mar 1, 2021 at 1:45 PM Christofer Dutz > > > > > <christofer.d...@c-ware.de> > > > > > wrote: > > > > > > > > > > > Hi Josh, > > > > > > > > > > > > While comparing the results I noticed there are some > > > > > > inconsistencies in the config files and I'm currently not > > > > > > quite sure to which is the correct > > > > > > version: > > > > > > > > > > > > In: > > > > > > - ace-config.xml > > > > > > - create-js-config.xml > > > > > > - jquery-config.xml > > > > > > - js-config.xml > > > > > > - node-config.xml > > > > > > The typedefs are defined in an element called: > > > > > > external-library-path > > > > > > > > > > > > In: > > > > > > - air-config.xml > > > > > > - flex-config.xml > > > > > > - royale-config.xml > > > > > > The typedefs are defined in an element called: > > > > > > js-external-library-path > > > > > > > > > > > > Which is the correct version? > > > > > > > > > > > > Also are the target-player and swf-version defined as > > > > > > properties in all configs except: > > > > > > - asdoc-config.xml (player 11.1 swf: 14) > > > > > > > > > > > > Probably it would make sense to process the asdoc-config.xml > > > > > > the same way as all the others. > > > > > > Right now I'd just keep it the way it is. Just thought I'd > > > > > > point it > > > > out. > > > > > > > > > > > > Chris > > > > > > > > > > > > > > > > > > -----Ursprüngliche Nachricht----- > > > > > > Von: Josh Tynjala <joshtynj...@bowlerhat.dev> > > > > > > Gesendet: Montag, 1. März 2021 19:29 > > > > > > An: Apache Royale Development <dev@royale.apache.org> > > > > > > Betreff: Re: [MAVEN DISTRIBUTION] getting the Ant and Maven > > > > > > aligned > > > > > > > > > > > > Hi Chris, > > > > > > > > > > > > Yes, that looks to me to be what the Ant build is doing too, > > > > > > so I think you are correct. > > > > > > > > > > > > -- > > > > > > Josh Tynjala > > > > > > Bowler Hat LLC <https://bowlerhat.dev> > > > > > > > > > > > > > > > > > > On Mon, Mar 1, 2021 at 10:21 AM Christofer Dutz > > > > > > <christofer.d...@c-ware.de > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > Hi Josh > > > > > > > > > > > > > > Yeah .. I saw in the commit history, that they sort of > > > > > > > were creatd shortly after the big-bang ;-) ... > > > > > > > > > > > > > > That's why I decided to take these as basis. > > > > > > > > > > > > > > What I'm now doing is generate a config from each by: > > > > > > > > > > > > > > 1. Replacing the playerversion 2. Replacing the swfversion 3. > > > > > > > Replacing the locale 4. In case of a no-swf distribution > > > > > > > filtering out the references to playerglobal > > > > > > > > > > > > > > I hope I got things right ... but I'm only including the > > > > > > > output in the distribution and not the templates, as I > > > > > > > assume they are not > > > > > needed. > > > > > > > > > > > > > > Is that corect? > > > > > > > > > > > > > > Chris > > > > > > > > > > > > > > -----Ursprüngliche Nachricht----- > > > > > > > Von: Josh Tynjala <joshtynj...@bowlerhat.dev> > > > > > > > Gesendet: Montag, 1. März 2021 18:46 > > > > > > > An: Apache Royale Development <dev@royale.apache.org> > > > > > > > Betreff: Re: [MAVEN DISTRIBUTION] getting the Ant and > > > > > > > Maven aligned > > > > > > > > > > > > > > I can tell you that the template config files have existed > > > > > > > since the Flex days. The "create-config" task in > > > > > > > frameworks/build.xml replaces certain tokens in the > > > > > > > template based on the Ant build's current > > > > > > configuration. > > > > > > > > > > > > > > Traditionally, a distribution would include all of the Ant > > > > > > > build.xml files to allow users to manually rebuild the > > > > > > > framework with local changes. If this still holds true, > > > > > > > then the config templates are > > > > > > probably required. > > > > > > > > > > > > > > -- > > > > > > > Josh Tynjala > > > > > > > Bowler Hat LLC <https://bowlerhat.dev> > > > > > > > > > > > > > > > > > > > > > On Sun, Feb 28, 2021 at 1:07 PM Christofer Dutz > > > > > > > <christofer.d...@c-ware.de > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > Hi Carlos, > > > > > > > > > > > > > > > > no ... the templates weren't created by me ... they > > > > > > > > always were in the frameworks dir ... I think the ANT > > > > > > > > build takes the templates and inserts variables to > > > > > > > > generate the real > > versions. > > > > > > > > I think I'll try to use these to do the same with maven ... > > > > > > > > unfortunately the files have gotten pretty out of sync. > > > > > > > > > > > > > > > > But can anyone here tell me if the "template" files need > > > > > > > > to be in the distribution? Are they needed for anything? > > > > > > > > Cause I would just add the generated versions. > > > > > > > > > > > > > > > > Chris > > > > > > > > > > > > > > > > > > > > > > > > -----Ursprüngliche Nachricht----- > > > > > > > > Von: Carlos Rovira <carlosrov...@apache.org> > > > > > > > > Gesendet: Sonntag, 28. Februar 2021 16:53 > > > > > > > > An: Apache Royale Development <dev@royale.apache.org> > > > > > > > > Betreff: Re: [MAVEN DISTRIBUTION] getting the Ant and > > > > > > > > Maven aligned > > > > > > > > > > > > > > > > Hi Chris, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I do have some questions: > > > > > > > > > - the "framework" directory contains a log of tupples: > > > > > > > > > xyz-config-template.xml and xyz-config.xml: Where does > > > > > > > > > the xyz-config.xml get generated from the template in > > > > > > > > > the ANT > > > build? > > > > > > > > > (I assume it generates them from the templates as part > > > > > > > > > of the > > > > > > build)... > > > > > > > > > could we possibly omit the "templates"? It seems as if > > > > > > > > > they are only needed to generate the configs for a > > > > > > > > > given set of configured properties. If that's the > > > > > > > > > case, we don't need them in the > > > > > > distribution. > > > > > > > > > > > > > > > > > > > > > > > > > I always though the template was created by you when you > > > > > > > > created the maven build for Royale. So if you think you > > > > > > > > can remove templates, I think it would be good to reduce > > > > > > > > files if they are not > > > > > used at all. > > > > > > > > > > > > > > > > > > > > > > > > > - The root element of the flex-config.xml was named > > > > > "roayale-config" > > > > > > > > > in the Maven distribution and "flex-config" in the Ant > > > > > > > > > distribution and it contained a reference to the > > > > > > > > > mxml-2009-manifest.xml. Also did the Ant version > > > > > > > > > contain a lot more implicit imports as well as a > > > > > > > > > fxg-base-class element > > > > > > > > > > > > > > > > > > > > > > > > > > maybe this could be the problem we're facing with > > > > > > > > fx:Array > > > > > > > > > > > > > > > > > > > > > > > > > So far the changes I found ... I updated the > > > > > > > > > distribution in the "features/distribution-allignment" > branch. > > > > > > > > > > > > > > > > > > > > > > > > > Great! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > But I guess I'll keep working on this and try to get > > > > > > > > > the maven distribution to have the same directory > > > > > > > > > structure as the Ant one (but excluding all the unnecessary > > > > > > > > > stuff). > > > > > > > > > > > > > > > > > > > > > > > > > Chris, let us know when is safe to test, and I'll do a try. > > > > > > > > > > > > > > > > Thanks for working on this! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Chris > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Ursprüngliche Nachricht----- > > > > > > > > > Von: Christofer Dutz <christofer.d...@c-ware.de> > > > > > > > > > Gesendet: Sonntag, 28. Februar 2021 12:28 > > > > > > > > > An: dev@royale.apache.org > > > > > > > > > Betreff: AW: [MAVEN DISTRIBUTION] getting the Ant and > > > > > > > > > Maven aligned > > > > > > > > > > > > > > > > > > Ok ... regarding the Array problem ... > > > > > > > > > > > > > > > > > > I have found the "Array.as" file in "compiler-externc" > > > > > > > > > and "royale-typedefs/js" ... both are identical ... > > > > > > > > > I'm not quite sure which one is used (I'm a bit rusty > > > > > > > > > regarding how all of these externs and stuff work > > > > > > > > > together) > > > > > > > > > > > > > > > > > > I did check and the royale-config.xml lists the > > > > > > > > > mxml-2009-manifest.xml (in both the non-swf as well as > > > > > > > > > the with-swf > > > > > > > > > version) so not quite sure why adding that to the > > > > > > > > > configuration > > > > > > > changes anything. > > > > > > > > > > > > > > > > > > Chris > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Ursprüngliche Nachricht----- > > > > > > > > > Von: Christofer Dutz <christofer.d...@c-ware.de> > > > > > > > > > Gesendet: Sonntag, 28. Februar 2021 12:08 > > > > > > > > > An: dev@royale.apache.org > > > > > > > > > Betreff: [MAVEN DISTRIBUTION] getting the Ant and > > > > > > > > > Maven aligned > > > > > > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > > > > > so thankfully Carlos re-sent me this link: > > > > > > > > > flex-sdk/README_integration_with_Adobe_FlashBuilder.tx > > > > > > > > > t > > > > > > > > > at master > > > > > > > > > * apache/flex-sdk (github.com)< > > > > > > > > > https://github.com/apache/flex-sdk/blob/master/ide/fla > > > > > > > > > sh > > > > > > > > > bu il de r/ RE AD ME > > > > > > > > > _integration_with_Adobe_FlashBuilder.txt > > > > > > > > > > > > > > > > > > > > > > > > > > > > So it seems as if we don't have a > > > > > > > > > ide/flashbuilder/flashbuilder-config.xml > > > > > > > > > with a "express-install-swf" element in it (we don't > > > > > > > > > have the entire > > > > > > > > > file) ... do we need this? > > > > > > > > > > > > > > > > > > Besides that, it seems all is setup as expected. > > > > > > > > > > > > > > > > > > Will continue looking into other things that could be > wrong. > > > > > > > > > > > > > > > > > > Chris > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > Carlos Rovira > > > > > > > > Apache Member & Apache Royale PMC *Apache Software > > > > > > > > Foundation* http://about.me/carlosrovira > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > Piotr Zarzycki > -- Piotr Zarzycki